How can you propagate honeysuckle from a bush?

Honeysuckle is a rather desirable plant in many garden plots, as it not only has an attractive appearance, but also gives an excellent harvest in the form of blue-purple sweet-tart berries. Various methods can be used to propagate shrubs. In this article, we will take a closer look at how you can propagate honeysuckle from a bush, dwell on the main decisions.

You can propagate honeysuckle from a bush by layering, but, unfortunately, this method is not suitable for all varieties of shrubs, but only for those that have rather strong annual shoots.

The rooting process involves several steps.

1. In the spring, it is necessary to dig up the soil around the bush, and also to clear the weeds.

2. Next, you should choose 3-4 young shoots, bend them to the soil and attach in this form using a wire. All actions should be as careful as possible, because the shoots of fruit honeysuckle are characterized by fragility.

3. All the selected shoots must be sprinkled with soil, the layer thickness should be from 3 to 5 cm. Throughout the season, the shoots need to be kept moist, as well as hilling, since during this period the root system is formed.

4. Already in the spring, the layers can be separated from the mother shrub and used as independent ones. A pruner is used for separation, daughter plants are planted in the desired area.

Separation of the bush is another way of reproduction, but it is possible only if the mother shrub is older than 3-5 years. Honeysuckle is a perennial, and shoots appear at the top only when the bush is already quite large. This method can be used either in spring or autumn. From 5 branches are used as divisions, but their number should not exceed 12 pieces.

Honeysuckle planting by division is carried out according to the following algorithm of actions.

1. The mother shrub must be dug up to get to the roots. With the help of a pruner, it is divided into several parts, while each of them should have three shoots and rather strong roots.

2. For disinfection all sections must be processed with ash or potassium permanganate solution.

3. To plant delenki, you need to prepare the planting pits - use not only nutrient soil, which should include compost, humus or peat, but also a drainage layer. Then the delenki are added in drops and watered well.

A strong and healthy plant should be chosen as a mother shrub, only in this case reproduction will be successful. Many gardeners use root suckers to breed honeysuckle. They can develop only on the adventitious kidneys, but this happens quite rarely. Initially, the plant must have a fairly strong root system, then the root bud can wake up, on which an aerial shoot is already formed. You need to wait 2 years, and then you will have to transplant it.

During the growing season, cuttings should be collected, so the cuttings method can be carried out in spring, summer and even autumn. You can use lignified one-year-old shoots or young growth. Of course, annual cuttings have a lower rooting rate, for this reason it is recommended to take mainly green young cuttings. But if this method is used in autumn, then only lignified brown shoots are used.

Preparing green shoots is pretty simple.

1. Attention should be paid to branches that are in the active growth phase. You should choose such an escape and break it - the presence of a crunch confirms the correctness of the choice.

2. It is advisable to prepare shoots in the morning or evening, exclusively in cool weather.

3. To separate the branch from the bush, an oblique cut is made.

4. Then the shoots are divided into cuttings, while each of them should have 3-4 internodes, but the length of the cuttings should be within 7-12 cm.

5. In order to retain moisture in the cuttings and promote root growth, the workpiece should be cleaned of the lower leaves, and also the upper ones should be cut off by half.

6. Immediately before planting, attention should be paid to the lower cut of the cutting - it is recommended to process it with the help of preparations that help to actively grow the rhizome. These include "Zircon", "Epin", "Kornevin".

7. The soil for further rooting should consist of sand and peat in equal proportions. Initially, you need to adhere to greenhouse conditions (you can keep the cuttings under a lid or film). It is very important to maintain a certain level of moisture and heat, and also make sure that they are not exposed to direct sunlight.

If it is decided to use lignified cuttings for propagation, then it is recommended to adhere to the following sequence of actions.

1. Woody cuttings take root worse than green ones, so they should be taken in larger quantities than necessary to have bushes as a result.

2. Shoots are cut in the fall and immediately wrapped in cloth and stored in a cool place until spring. If desired, they can be dug in with sand or placed in wet sawdust. If lignified cuttings are cut in the spring, then you can immediately proceed to their rooting.

3. It is recommended to divide the shoots so that about 2-5 internodes remain on each.

4. Planting shoots is done in the same way as the above process with green shoots.

In large farms and various scientific organizations, honeysuckle propagation using green cuttings is often used. If this method is used for a small suburban area, then it requires additional money and effort. Greenhouses should be used, with particular attention to lighting, and adequate sprinkler irrigation should be provided.

If we consider reproduction using lignified cuttings, then in this case it is worth paying attention to the following factors:

• genetic characteristics of the variety;

• watering mode;

• hardening mode;

• preparation of cuttings.

This option is perfect for such varieties as "Lenya", "Viliga", "Knyaginya", "Blue Dessert", "Antoshka", since almost all of their cuttings take root. But the varieties "Shahinya", "Gzhelka" and "Dlinnoplodnaya" are characterized by poor survival rate.

Usually in the center of Russia, honeysuckle at the end of May already pleases with juicy fruits. It is during this period that you can already start grafting.

Slicing is recommended in the morning. Cuttings should be 15-20 cm long, have several pairs of upper leaves and 2-3 internodes. They must be immediately placed in greenhouse conditions, where automatic irrigation is equipped. It should be done from 8.00 to 18.00, the watering time should be 20-30 seconds, and the breaks should be 40-50 minutes. If the weather is rather hot, then the breaks should be no more than 25 minutes. Such watering is suitable for the first two months after planting.In the future, the intervals between waterings increase, as does the watering itself.

Quenching should be carried out at the end of August. For this, the greenhouse film is slightly opened for a short time. It is recommended to start with a few minutes, gradually increasing the time. And closer to mid-September, the film can be completely removed.

At the end of September, you should start digging cuttings from open soil and replanting them in special containers or furrows of the beds. If you choose the strongest cuttings, then they can already be planted in a permanent place for growth.