Everything you need to know about apple tree formation
The apple tree, like any fruit tree, for which there was no care, grows in all directions. And although the huge crown gives coolness and shade in summer, oxygen, not every gardener will like that half of it hangs over the house, and a large weight creates a threat of falling branches.
Why do you need to form a crown?
The formation of an apple tree - more precisely, its crown - is carried out in order to limit its growth in height. The danger is represented by old branches blown off by strong winds. As for fruiting, it is observed only on branches that are no more than 5 years old. Inflorescences appear - and, as a result, apples are tied and grow - only on relatively young shoots. Old branches, which are more than 5 years old, form only the so-called. a skeleton of a tree that performs a load-bearing function.
Tools and materials
Most often, only a garden pitch is required as a consumable. Smeared, sealed from rainwater cuts and cuts will prevent the tree from getting sick. And although plants have a so-called. the compensatory mechanism leading to the drying out and death of stems and branches in the area of the cut line should not be abused: like any wood material, in fact, it blackens, rotts and makes it possible to germinate moss, mold, fungi, is a bait for microbes and some insects that feed on cellulose, which make up the bark, wood and heart. An alternative to var is wax.
A pruner is suitable for cutting thin branches: it will manually cut the stem up to 1 cm. An alternative is hydraulic shears. For thicker branches, an (electric) jigsaw, (electric) hacksaw, (benzo) saw, a grinder with cutting discs for wood are used.
Schemes
Cutting off unnecessary (and interfering) branches correctly, without causing damage to either the structure nearby, or the people nearby (and their property), is the primary task.
Pruning, thinning the crown allows you to cope with the problem of the quantity and quality of the crop.
Sparse tiered
This type of trimming is performed according to the scheme described below.
- In the second year of the seedling's life, pruning is carried out in March or at the beginning of April - until the foliage has blossomed - at a height of 1 m. The cut is performed on the bud opposite to the grafting.
- In the third year of a young tree's life, the top is cut off, leaving at least 5 buds above the last (upper) fork. The general rule is that the upper branches should be 30 cm longer than the lower ones.
- Branches extending from the trunk by less than 45 ° are bent using flexible supports. Tying to pegs stuck into the ground is acceptable.
- In the fourth year, some branches become fundamental. The lower tier provides for leaving at least three branches, the upper ones - the same number, but no more. Extra branches leading to a decrease in the clearance between different tiers - less than 80 cm - must be removed. Branches in each tier should be at least 15 cm apart.
- A "matured" apple tree with a height of 3-4 m forms up to several tiers. The number of main branches reaches no more than 12. Young shoots are pruned on them - by a third of their length.
- In other years, the apple tree is adjusted - its height does not exceed 4 m on average.The fact is that harvesting, for example, from a 7-meter (and higher) apple tree, like any other fruit tree, is difficult. Old-school gardeners shake the branches of a tree, and ripe apples are poured onto the previously laid material. This method really speeds up harvesting rather than rearranging stairs or climbing a tree, so some land owners still do not touch the crown until the tree reaches, say, 20 years of age. However, it is not recommended to do this: the tree becomes unsafe for the nearby people living (being).
In an adult apple tree with a height of 2.5-3 m, several tiers are obtained, and the number of skeletal branches is from 5 to 8 (no more than 12).
On skeletal branches, it is recommended to shorten annual growth by about one third annually.
Whorled-tiered
Whorled crown - a view when not two, but three branches converge at one point of the trunk. The buds from which these shoots will grow are located side by side. An undercut trunk and divergences starting at a height of 60 cm, tiers spaced at the same distance are its features. To form it, do the following.
- In the second year, cut the seedling at a height of no more than a meter from the ground. During the spring, summer and autumn, lateral branches will grow - all other buds, above and below the place of branch growth, in the fall, remove, leaving the upper one, which serves for a new vertical shoot, which plays the role of an extension of the trunk.
- In the third year, wait for the central new shoot to grow. He, in turn, will give new buds, from which a new "triple divergence" will go. Remove the buds that do not play a role in the whorled branching of the lateral branches.
Repeat this scheme from year to year until the tree acquires up to 5 whorled tiers. From this moment on, regularly cut everything that is superfluous, leading to further growth upward and excessive thickening of the crown.
Vertical palmette
Follow the steps below to form a vertical palm variety.
- On a seedling, every November and March, remove the buds that do not play any role in the formation of an opposite arrangement of branches (two diametrically opposite).
- Make sure that the main branches develop from the buds left behind - two for each tier. Guide them parallel to the ground using guys and spacers.
- When the first tier grows, for example, 2 m from the trunk, using a trellis or hangers, direct them upward, smoothly expanding. Do not bend so that a break does not form: if you try to bend the branches abruptly, they will receive irreversible damage.
- The next tier - for the 4th year - is formed in the same way. The upward direction of the branches of each next tier is made so that there is a uniform indent between them - for example, by 30 cm.
- Repeat these steps. 2 meters in each side - 5 tiers. The last tier is 50 cm from the trunk.
When the trunk is 4 m long, trim it back. Cut off all unnecessary shoots that interfere with the "palmetto" crown.
Fusiform
The scheme for creating a fusiform crown is as follows: branches are located on the trunk of an apple tree alternately, opposite and / or whorled, but directed in different directions.
- Remove all buds from the trunk, cut off branches that interfere with the next arrangement of future and existing branches.
- Shorten the main tree-forming branches: the lower ones - 2 m, the second tier - for example, 1.7, the third - 1.4, the fourth - 1.2, the fifth - shortened, about 0.5 ... 0.7 m.
- Do not leave the sixth tier. Cut up the trunk 4 m from the ground.
Cut the excess growth, creating a "fluffy", spreading top and thickening the tree, in a timely manner - in March or November.
Creeping
The principle of the formation of the creeping crown is as follows: two horizontal tiers are left, the rest are removed completely. Dignity - a low tree that allows you to harvest without a stepladder. Do the following.
- Grow the tree to a height of 2 ... 2.5 m.
- Remove all buds and shoots from the trunk in advance - except for the one that forms two opposite "skeletal" branches. The total number of branches is 4.
- When the tree is no more than 2.5 m in height, trim the trunk at this mark.
- With the help of trellis beams, braces as you grow, direct the branches that serve as a "skeleton" parallel to the ground.
Having achieved the creeping crown, cut off all unnecessary branches and shoots in time, including root formations.
Bushy
The main principle is to create a bush from a tree seedling. Choose, for example, an apple seedling of the Berry variety. The height of the bush is not more than the average human height. Wait until the apple tree seedling reaches a "growth" of about 190 cm, and cut off the top of the trunk at this mark. Do not cut side shoots. Let them grow at will.
The principle of pruning - in order to avoid thickening of the tree - repeats, for example, caring for a rose bush or berry crop, for example: raspberries or currants. The result is that all ripe apples are easy to pick without climbing a tree or using a portable ladder.
Cup-shaped
Such trees are short-lived (life span - no more than 10 years), do not differ in high growth. Bowl pruning is done in stages.
- In the spring - in the second year - a seedling is cut at a height of 1 m.
- The main three branches are spread on the sides - at 120 °. The branches are shortened to 50 cm, and the trunk - on the second - third bud from the fork.
- In other years, the crown should not be allowed to thicken - the strongest branches directed to the center are pruned.
- Unnecessary kidneys are disposed of by pinching.
Short side branches do not touch - the yield depends on them.
Flat crown
The flattened crown consists of horizontal branches sticking out in all directions from the trunk. They are located at a distance of 40 cm from each other. The shape of the crown resembles a palm leaf. When creating a flat crown, a trellis structure is used. To create such a shape, a seedling is used that does not have side branches.
- In the second year, the seedling is shortened, leaving a 40-centimeter segment with three buds located in the upper part. The lower kidneys are located opposite each other. While the branches are actively growing, they are guided and fixed on the trellis structure. The process of the overlying kidney is directed straight up, and the lower ones - at an angle of 45 °. To tie up the lateral processes, they use slats fixed on galvanized wire.
- In the third year, the trunk is cut at a distance of 45 cm from the lateral lower branches. Three buds remain on it, which are necessary to create a new central process and a second tier of horizontally located branches. The latter are then trimmed by 1/3, trimming them to the buds directed towards the ground. Everything else that turned out to be superfluous is cut to the third kidney.
- The cutting cycle is repeated to form new tiers. You should not create more than 5 - the tree will lose all appearance.
From this year on, pruning is carried out in such a way as to preserve the layering acquired by the tree and its general appearance.
Nuances of the formation of apple trees by year
Spring pruning will make it possible to assess whether the tree has become sick as a result of improper actions by the gardener, whether unnecessary pests have appeared. Formation does not start immediately after planting - give the tree at least a year to grow. They begin to form before the age of fruiting - and continue until the tree reaches ten years. After ten years in the fall, trim the excess growth, which does not positively affect the yield of the apple tree.
Seedling
At the seedling stage, intervention in growth adjustment is minimal. Saplings are trees that have no more than one or two tiers of main branches that have begun to form.
Young
Young trees have two or more tiers. The tree is up to 6 years old. The yield may be incomplete. The key to its early increase is the correct formation of the crown according to any of the above schemes.It is better to cut a haircut when the entire trunk is strewn with annual shoots: the tree spends nutrients on extra shoots, their amount needs to be reduced.
Adult
A mature tree is a plant that is 6 years old or more. It has finally formed its tiers of branches - there are 5 of them. The shape you were trying to give to the apple tree is now complete. The tree must be cut every spring or autumn - from excess branches, creating unnecessary thickening, entailing the loss of part of the crop. Pruning is carried out both superficially (giving the necessary outlines to the crown) and voluminously (in the crown itself, branches are cut off on the branches that do not carry any practical benefit, that is, they have ceased to bear fruit).
Old
Old apple trees include trees whose age has reached - or exceeded - the 30-year mark. It is advisable to cut off all old branches that pose a danger to at least a third of their length. The shape of the crown during rejuvenation from flat or "palm" becomes spherical in 2-3 years.
Common mistakes
Do not combine several pruning schemes within the same tree - the output will be a seedling with a shapeless crown that does not give a specific result.
Do not use the “wrong” crown formation option. Berry varieties that include a bush are not suitable for a pruning scheme, for example, under palmette - but they are suitable for creating a "spindle".
The bending of the branches cannot be performed abruptly, forming a kink.
It is advisable to prune, say, at a temperature of +3, while the tree is still "sleeping". Do not prune in frosty weather or during the growing season when the foliage is already in full bloom. The exception is sanitary pruning.
It is not recommended to leave the tree without a "central conductor" - the part above the trunk extending from the place of the first fork (the level of the lowest tier).
Do not cut the seedling immediately after planting - let it grow, strengthen.
The comment was sent successfully.