How and with what to close up a hollow in an apple tree?
A hollow can appear on an apple tree of any age, but even if the tree is young, the problem requires timely action. There are several ways to eliminate the cavity, but in all cases, the hole will need to be cleaned and disinfected first.
Why is a hollow on a trunk dangerous?
If a hollow has formed in the fruit tree, this most often indicates the presence of one of the very serious problems. This can happen due to infection of an apple tree with wound rot, an attack by rodents, or an infection in large wounds that have not been sealed in time. Hollows also appear when the tools are used carelessly, leading to the dissection of the trunk, due to natural disasters, or under the influence of burns or extreme cold. Whatever the reason for the appearance of voids, it always opens up access to the inner tissues of the tree.
As a result, fungal spores, dangerous microorganisms and pests can get there.
All of them will damage the apple tree and, as a result, the tree will gradually die. Even in the presence of a small hole, the condition of the tree will still deteriorate: the development of culture will definitely slow down, the wood will become less durable and, most likely, the amount of harvest will noticeably decrease. It is worth mentioning that if a hollow has formed at the base of the trunk, and it has already grown significantly, then such an apple tree cannot be saved - all that remains is to cut it down.
Preparing for tree treatment
Experts adhere to the position that it is best to heal a hollow in the fall, choosing a day for processing without heavy rainfall. It is important to have time to carry out the procedure before the establishment of constant low temperatures. Otherwise, the substances used for treatment will simply freeze, not fulfilling their function. The autumn weeks before the onset of frost is the time when metabolic processes slow down in the tree, and therefore a round wound will heal faster. In any case, it is not recommended to leave the cavity open for the winter.
If the hollow is oversized and several layers of substances are required for sealing, it is better to organize treatment in the summer, so that all the putty hardens before the cold weather.
Filling in the spring is not a good idea. With the onset of heat inside the barrel, in any case, the movement of juices will start, and the processes occurring will destroy the fixing compounds. In addition, the tree will continue to grow, which, again, will affect the filled filling. In emergency cases, that is, when the wound has just been received, but putrefactive processes are actively developing, the hole must be eliminated, regardless of the season.
Cleaning
Before removing the wound, it will need to be cleaned out. This can be done with any well-sharpened tool: a garden knife, a chisel or an electric drill with a suitable attachment. The main thing that needs to be done at the preparatory stage is to remove all dead, diseased or even decaying fragments. It is imperative to remove all dark areas, and it is also reasonable to clean up a thin light layer that may already be contaminated with bacteria.
An ordinary tablespoon will allow you to get to the undulating hollows of the hollow, although in some cases you will still have to cut out a passage.
In order not to miss a single blackout, it is better to illuminate yourself with a flashlight during cleaning. The edges of the cavity are leveled by removing dried wood.After taking out all the debris, and wiping the hole from the inside, it will be necessary to leave the tree alone for a while - you can proceed to disinfection only after the processed insides of the trunk are completely dry. Any pieces of wood collected during stripping are burned off-site to avoid causing the problem to reappear. It is necessary to clarify that sometimes the apple tree may look healthy, but if you knock on the trunk, then voids will be found inside. In this case, the bark will need to be cut out, and then process the opened hollow properly.
Disinfection
It is better to disinfect a cleaned wound on a dry day, without precipitation and wind. To protect yourself while interacting with chemicals, it is better to wear special plastic glasses, as well as tight clothing with long sleeves and legs. Most often, treatment with copper sulfate is chosen for apple trees. A solution of this substance with a concentration of 1-3% is taken in an amount of 100 to 300 grams and diluted in 10 liters of water. You can also use a 5% solution of ferrous sulfate. In this case, the preparation in the amount of 500 grams is diluted with 10 liters of water.
In horticulture, processing with bright pink potassium permanganate is widespread. In addition, the cavity can be treated with a 3% carbolic acid solution.
If pronounced fungal lesions are already observed on the apple tree, then a plus to the basic disinfection, you can treat it with a solution of Bordeaux liquid, colloidal sulfur or universal fungicides. Usually, the drug is simply applied to the inner walls of the tree.
How can you cover it up?
How to close up a hollow in an apple tree is determined depending on the degree of damage to the trunk. The small hole is filled with a cork cut from healthy wood. The design is first adjusted in size, then necessarily disinfected with fungicides, and only then inserted into the hollow. The filling should be preceded by filling the cavity with garden pitch. The protruding excess cork is carefully cut off, after which the entire damaged area of the trunk is covered with pitch.
After drying, it is recommended to cover the trunk with oil paint containing natural drying oil.
And also the hole, the diameter of which does not exceed 25 centimeters, and the depth also does not differ in size, can be filled with a mixture of cement and sand. The two components are used in a ratio of 1 to 3 or 1 to 4. During the procedure, the first thing to go inside is the frame - an intertwined wire fixed with nails. Next, the hole is filled with a small layer of gravel, and then cement is added in small portions. It is important to mention that the filling substance is laid in layers, and the next is formed only after the previous one has dried. The surface of the resulting plug is leveled with a trowel or a wet rubber glove and left to dry. Upon completion, the trunk will need to be coated with linseed oil or ocher.
It is quite easy to save a tree with polyurethane foam. This substance does not allow air or liquid to penetrate into the wound, which means that pathogenic microorganisms can spread.
In addition, the specificity of the material lies in the ability, increasing in size, to fill cracks and depressions. Excess foam can simply be removed with the palm of your hand even before the substance hardens, and the hardened pieces can be cut off with a sharp tool. After waiting for it to dry completely, the healed area of the apple tree will need to be protected from exposure to ultraviolet rays, which means it should be smeared with ocher, drying oil or oil paint.
A large cavity, that is, one with a diameter of more than 25 centimeters, can also be sealed with polyurethane foam, acting according to the above scheme. However, some gardeners additionally cover the solidified substance with a solution of clay with a mullein.
The use of cement is carried out in a slightly different way.After combining it with sand in a ratio of 1: 3, 1-1.5 tablespoon of drying oil is added to the solution.
Correctness is determined by the state of the substance - it must be plastic, not watery and easy to use. Before filling, part of the hollow is first laid with brick chips and gravel, and then the cement mixture is gradually poured. To prevent the composition from spilling out, it is necessary to block the hole with a wooden board.
When the layer dries, broken brick is again poured inside, and cement is poured. This algorithm can be repeated several times. When the last layer hardens, which can take up to a week, it remains to remove excess material and grind the surface of the seal so that it does not stand out above the surface of the barrel. The completed work is painted over in several layers with oil paint. In the future, every year it will be necessary to clean the circumference of the hollow to the cambium, or to make incisions on the growing bark.
Such actions contribute to the overgrowing of wood.
When a hollow appears on a seedling, it is sufficient to use a garden varnish to solve the problem, and cover the resulting seal with oil paint. It is impossible to close the hole on the old apple tree - in this case, all that remains is to cut it down. Small damage, even with rotten wood, can be eliminated really. Cleaning of such a barrel is carried out with a drill with a metal attachment, followed by disinfection with a powder of ash and charcoal. The hole is clogged with wood cork, protected with a foil and tied with a rubber band.
Possible problems
If the cavity is at the base of the trunk, and therefore affects the stability of the apple tree, then a metal mesh is necessarily inserted inside, the holes of which have sides of 7-8 centimeters. Settled ants after stripping are driven out by appropriate insecticides. Plus, fungicides are immediately introduced to them, since these insects spread fungal spores. The nest, organized by the birds in the hollow, is removed in the absence of "hosts". The opened hole is cleaned and disinfected, after which it is coated with garden varnish and dried.
If juice is observed in the hollow, it means that the apple tree is sick due to improper care or treatment. In this case, the cavity must be cleaned and disinfected, and after drying, smear with a mixture of Ranet and garden varnish, taken in equal proportions. If the reason for the appearance of juice is the activity of the bark beetle, then the culture will have to be treated with "Aktellik" and "Fufanon".
The comment was sent successfully.