Accessories for sliding gates: selection features

Sliding gates are gaining immense popularity today, as they are distinguished by their simplicity and practicality. The functioning of these systems is provided by special mechanisms that simplify the sash rollback. Accessories for sliding gates must be suitable for the system load. This will extend the life of the blade and eliminate frequent breakdowns of the roller drives.

Sliding gates are canvases that move parallel to the main fence. For such purposes, special components are used to ensure minimal friction between the guide and the drive.

Sliding gates have several significant advantages:

1. Smooth running. This is ensured by well-lapped roller systems that move with minimal friction.
2. Moving the web is performed to the side. This eliminates the need to remove snow in front of it for opening.
3. Long service life.
4. The ability to use both manual and automatic control.
5. High resistance to climatic factors.

But such systems do not solve many problems, since they have several disadvantages:

1. When opening, the leaf closes the side. To do this, additional space is needed, which is not always available.
2. The weight of the entire system is very large, therefore, all supports are installed only with the help of concreting. This also incurs additional financial and physical costs.
3. The roller system is quite demanding on cleanliness. In order for all the gears to work properly, you should constantly monitor that leaves or snow do not accumulate between them.

Sliding gates are used today in almost any enterprise or private area. Their high practicality and functionality are gradually replacing opening systems.

Technically, a sliding gate consists of several main parts:

• Canvas. It is a decorative element that represents the gate itself. It can be made from almost any material. But most often metal pipes, fittings and steel sheets are used for this.
• Frame. This structure is a metal support, which is often hidden in the ground. Only a small layer of metal protrudes from above, on which the entire sash rests during movement. They are made from metal channels, which provide durability and strength.

• Guide and support rollers. With the help of these elements, the movement of the canvas in space is carried out. The design of these mechanisms may differ depending on the manufacturer and type of gate.
• Electric drive. This mechanism is optional, as the gate can move without it. But if you do not want to put physical effort for this, you can install an electric motor.

Depending on the method of operation, sliding gates are divided into several types:

• Suspended. A feature of structures with an upper suspension is that all mechanisms are attached to the top of the frame. Externally, the systems resemble a metal frame, but the supporting elements are already suspended. Hanging gates are used only in industrial facilities, since their installation is very expensive and difficult.
• Console... This type of gate is used everywhere today.The canvas of such structures moves on rollers that are attached to a metal support. Installation of such structures is possible almost anywhere where there is space for the sash.

• Rail. This mechanism resembles the previous type of gate. But here, the movement of the sash is already carried out on a rail that is mounted in the soil. A feature of such gates is that they are not afraid of mechanical influences on the sliding system.

Correctly selected fittings will ensure long-term and reliable operation of the sliding gates. For their functioning, you will need a standard set of mechanisms, which includes the following elements:

• Channel. It is often used to form a support for the rollers. Length and dimensions are selected depending on the weight of the gate.
• Carrying profile. Outwardly, it resembles a profile pipe, but on one side there is a slot for the rollers, which should be located inside. This mechanism is made of durable metal that can withstand loads and resist bending. This structure is attached directly to the lower end of the web.

• Roller supports and carriages. The first part is a plate that is attached to the foundation with special bolts. The carriages are also fixed to the supports with several connections. This element also perceives the main load.
• Supporting rollers. Their purpose is to minimize fluctuations. Attach them on top of the support pillar. The system assumes the presence of 2 or 4 rollers, between which the sash moves, without shifting to the side.

• Catchers. They are mounted on opposite support pillars. Catchers are needed to fix the web in the closed position. They make products from high quality galvanized steel.
• Knurling roller. They fasten it at the end of the gate so that when closing it docks with the trap and, as it were, runs over it.
• Automation. This element is not always present, but today it is increasingly used. This kit includes an electric motor, as well as a drive that transfers power from it to the blade.

The modern market offers many accessories for various types of sliding gates. They all differ in quality and purpose, therefore it is important to select the right systems for specific situations.

To purchase reliable products, it is important to pay attention to several basic criteria:

Experts recommend giving preference to supports with walls at least 4 mm thick. If the weight of the canvas exceeds 800 kg, then it is advisable to increase this indicator to 5-6 mm. All beam surfaces must be properly processed or protected with special compounds (zinc and so on).

The cross-section of the beam should be uniform, and there should be no burrs and chips on the surface of the faces. This will allow the rollers to slide with minimal friction. The structure itself should weigh about 1.5 times more than the gate itself. Thus, an optimal level of performance is ensured, regardless of climatic and other conditions.

There is no one size fits all solution. Many experts say that it is better to install the canvas on 5 supporting elements. It is important in this case, so that one of these rollers is transverse. This will distribute the load evenly. If you use 8 support systems, the canvas will still rely on only 4 of them.

When you plan to install the casters yourself, it is important to ensure that they are well fixed. Minimal fluctuation leads to the formation of friction and failure of mechanisms.

These elements are among the most important in the entire sliding gate system. One of the attributes to look out for when buying brackets is a convenient mount. Also, they must have a special adjustment system that allows them to be mounted, regardless of the distance between the support posts.

Therefore, they must all be metallic. If you buy this plastic product, then its service life depends on the weight of the sash and the quality of the door operation.

One of the main components of sliding gates is also an electric drive. Its power is determined depending on the weight of the canvas.

The market is saturated with various types of accessories for sliding gates. The reliability of these products mainly depends on the manufacturer. Today, materials of several brands can be distinguished:

1. Roltek... Products of this brand are distinguished by their reliability and durability. Many buyers claim that these systems are excellent value for money. All elements are made of anti-corrosion steel, which can last at least 5 years.
2. ITSELF... The products are suitable for solving both industrial and domestic tasks. The mechanisms are quickly installed and serve for a long time.
3. Alutech. Belarusian parts compete well with foreign-made materials. They are made of galvanized steel. The systems are designed for use on doors weighing up to 800 kg.

This rating can be supplemented with the products of the DorKhan company. But it is not of high quality, and many owners advise using it only for gates weighing no more than 450 kg.

When choosing fittings for sliding gates, you should carefully study the market before making the final choice. When working with such products, you should be guided by several recommendations of specialists:

1. Buy parts from well-known manufacturers only. In doing so, be sure to take into account the weight and dimensions of the door. Based on this data, specialists will select the necessary components.
2. Please check all the details when purchasing. Analyze all surfaces for damage or geometry misalignment. Be sure to ask the seller for a guarantee and a quality certificate.
3. Entrust the installation of sliding gates only to experienced professionals. They will not only quickly build the system, but also configure it correctly to your needs.

Buying accessories for sliding gates is a complex task and should only be done with the help of an experienced installer. He will select all the details depending on the technical parameters of the canvas.

For tips on how to choose the right accessories for sliding gates, see the video below.