Pumps for pumping water from the pool: types and selection

Pumping equipment is simply necessary for people who have houses or summer cottages. It is used for many household purposes. This can be pumping water from a cellar or a well, watering and irrigating a land plot. If you own a pool, purchasing a pump is a major consideration when using it.

In order for the pool to serve as long as possible, and the water is always clean, it is necessary to select a pump with certain parameters, as well as to install it correctly. Continuous filtration of water is a significant indicator for the pool.

To pump out water, pumps are used, which differ in the way of immersion, power and functionality. There can be several of them in one pool, if it has a complex structure or a large volume of water.

There are several types of pool pumps.

Surface pump It has a low power, therefore it is used in pools with a small volume. The suction height is no more than 8 meters. Such models are made of high quality plastic, do not make noise during operation.

Models made of metal intended for use in large swimming pools such as public or city ones. For their installation, bowls are provided, which are laid during the construction of the institution.

Submersible pump has an aesthetic appearance and is installed to a depth of no more than 1 meter. The models have a different volume of work, they can pump out large and small pools, and also perfectly cope with pumping out dirty water with solid particles up to 5 cm.

This type drainage the pump works only when fully or partially immersed in water. To connect to the power grid, there is an electric cable, which is equipped with reliable insulation from moisture. The pump body is made of metal, which ensures its high wear resistance. In such models, overheating of the engine is excluded, since it is cooled by water during operation.

Drainage pumps are used in outdoor pools in order to pump out water for the winter. To ensure the normal operation of the pool, several pumps of different types can be used simultaneously. Each of them performs its own function. The transfer pump is used to quickly remove water from the structure in case of repair or sanitary cleaning.

The circulation pump ensures the movement of the water flow to the cleaning and heating devices and vice versa.

Filter pump mainly used in inflatable and frame pools. These models have a built-in filter. It comes in two flavors: paper cartridges or sand pumps.

Sand filter pumpson the contrary, they are designed for a large volume of water.The cleaning method consists in the fact that contaminated particles go through quartz sand and remain on it. To clean such a filter, you just need to pass the water in the opposite direction and drain the liquid into the garden or drainage compartment in the sewer.

Filtering components can be varied. For example, quartz or glass sand. Quartz can last up to 3 years, and glass - up to 5. In addition to these components, ozonizers can be added, which destroy microbes and break down small particles of dirt.

In order to connect the equipment, two tubes must be connected. One is for sucking water from the pool, the other is for throwing it out of the structure. The pumps can be powered by electricity or from a diesel unit. When operating on electricity, you must first determine the pump into the water at the distance provided for by the model's instructions, and then connect the cable to the network. Diesel is turned on by pressing a button.

During operation, it is necessary to follow some rules that will extend the life of the device:

1. the pump should not work without water;
2. during a large pumping volume, provide the device with a rest if it works for more than 4 hours;
3. surface models are installed only on a flat, ventilated surface;
4. all pumps must be serviced by a specialist.

Having a drain pump will help solve many of the problems associated with excess liquid after rains and showers, and will also help in using pools.

To select a device, it is necessary to clearly define its function.

1. For example, when choosing a surface pump, you need to understand that it can not completely drain the pool, but only until a large volume of air begins to flow into the intake pipe.
2. The pump for pumping water is limited and does not exceed 9 meters.
3. The most suitable and demanded is a submersible pump, since it drains the container almost dry, works silently, is not afraid of dirty water and the ingress of large particles. The presence of a float will only add advantages to such a pump - the float switch will automatically turn off the pump after the end of work.
4. Pump power is one of the selection criteria. The speed of pumping out water depends on this indicator. If these are temporary pools, then inexpensive models with a plastic case are suitable for draining the water: they are able to pump out about 10 cubic meters from the bottom. m per hour. For a stationary pool design, more powerful pumps with a metal casing are needed. They can pump up to 30 cubic meters. m per hour.
5. To pump out water in salt water pools, pumps with a bronze casing are used - it does not corrode.
6. Quiet operation depends on the material of the pump body. Plastic ones provide quiet operation, while metal ones are capable of making sound.
7. When choosing a manufacturer, rely on the popularity and reputation of the brand, as well as customer reviews.

How to choose a pump for pumping water, see below.