How to root grapes?

Grapes are a fairly popular plant among gardeners, as they are characterized by easy rooting. It is usually grown from cuttings, because they quickly take root. In this article, we will take a closer look at how to root grapes correctly, what methods are popular.

For the process of rooting grapes to be successful, you need to use live cuttings. It should be noted that the harvesting of cuttings is done in the fall. They are cut, wrapped in a cellophane bag and placed in the refrigerator for storage. Although you can store them in a room where the air temperature is from 0 to +5 degrees.

The stalk absorbs moisture, which is lost over time, as a result, it may die. It is recommended to check it just before the rooting process. Using a knife, an incision is made in the lower part of the plant, if the wood is bright green, then you can proceed to rooting.

Water for sprouting cuttings is ideal. But it is strictly forbidden to use water from the city water supply.

The top of the cutting should be cool, while the bottom should always be warm. If at the top the air temperature should vary within + 10-15 degrees, then the lower one should be + 23-27 degrees. In such conditions, the roots will appear before the buds begin to bloom. To maintain the required temperature conditions, you can apply one of the following methods.

1. Jars with cuttings should be placed above the battery, but the window should be left ajar. This method is very simple, but it does not allow control of the top temperature, and it is not suitable if many cuttings are rooting at once.
2. The jar can also be placed on a heating foil, for example, using the "warm floor" system. The seedlings will receive the required temperature from below, and the upper one will already be supported by the supply of fresh air through the window.
3. You can slightly modify the first method., if you place a sheet of metal on the battery, on top of which the jars will be located. This approach will allow the containers to be constantly heated from below.

Usually, after 2 weeks, roots begin to appear.

A fairly effective way is to root grape cuttings in the ground. Initially, it is necessary to prepare containers, the volume of which will be from 0.5 to 1 liter. You can use peat pots, plastic cups, and even bottles if you cut them in two beforehand. Expanded clay is poured at the bottom of the tank.

The soil should include equal proportions of sand, humus and garden soil. This composition is characterized by airiness. You can take in equal proportions sand and universal earth mixture purchased in the store. Further, the soil must be thoroughly moistened.

The rooting stalk must have an oblique cut. It is placed in a prepared container and covered with earth by only 1/3 part.The handle must be upright and stable. Further, the planting must be watered.

If there is no sand to add to the soil, then it can be replaced with perlite or vermiculite, since they give the earth airiness, and also perfectly retain moisture.

After planting, the cuttings should be placed on the windowsill. Further, it is very important to adhere to the same temperature regime that is used during the rooting of grapes in water. If a leaf appears on the handle, this signals that the plant has sprouted, and it can be planted in a permanent place.

Many gardeners use peat tablets for rooting grape cuttings in the summer. Initially, they should be soaked in water for 1-2 days, then a special cut should be made and the end of the cutting should be inserted into an already swollen peat tablet. After that, you need to wrap it with a damp cloth, over a plastic bag and tie it tightly to keep moisture inside.

This option is very popular, since such a structure with a handle can be stored even in a cabinet, in addition, there is no need to observe the temperature conditions described in the methods above. Germination will take place in 3-4 weeks.

Over time, it will be possible to observe that small roots break through the wet peat tablet. Further, the plant can already be planted in open ground, but you should be quite careful, since you will need to cut the mesh on the tablet, while not damaging the roots.

The peculiarity of this method is that the roots can already be observed, but the leaves are still missing. As a result, the seedlings are not elongated.

There are quite a few ways to root grapes in the spring or summer, for example in August. It is worth paying attention to the Moldovan version, because many wines and juices from Moldova are in demand all over the world. They even have a grape cuttings rooting in a special way.

You need to take a vine, the length of which will be from 55-60 cm. It needs to be carefully twisted into a ring and tied with a rope for secure fixation. Further, this ring fits into the earthen hole, but 1-2 buds should remain on the surface. The planted vine should be covered with a mound of earth, then the buds will not dry out. It is recommended to do rooting in March, and in the fall the seedling will be quite powerful, and the next season it will delight with fruits.

This method implies regular feeding, as it is necessary to provide the long vines with nutrients.

Another popular method is aeration, which is carried out in the aquarium. Prepared cuttings should be placed on the foam bridge, while they should be about 2-3 cm in the water. An aerator is placed in the aquarium, which pumps air, as a result, the roots germinate quite quickly. The top of the cutting will be cool, and the bottom will be in warm water, and as a result, the root system develops faster.