Ceramic flower pots: features, sizes and designs

When choosing a pot, you can be faced with a fairly large selection. In order not to get confused, you need to focus on the experience and reviews of other buyers. Ceramic flower pots are still in demand. This material has stood the test of time. But their design and principle of operation remained the same. Most of the innovations relate to design.

Now on sale you can find many containers designed for growing plants. But not all of them are pots in the full sense of the word. A flower pot, in addition to being a container for soil, has an inherent characteristic: the presence of holes (through which excess water flows) and a stand (into which it flows). Thus, all kinds of pots and containers do not fit this definition. Planting directly into a flowerpot is fraught with the death of the flower, if there is no constant outflow of excess liquid.

Ceramic is usually understood as a fairly wide group of flower pots.

• Simpler models made of clay and fired are much better suited for growing greenery due to the preservation of the porous structure. They are usually not glazed.
• Ceramic is clay with the addition of other minerals. It is fired at a higher temperature and is more homogeneous. Such a product can be additionally coated with glaze (and not even in one layer) using various processing, firing and cooling techniques. There are quite a few types of ceramics - porcelain, terracotta, and majolica. They are thinner than simple clay ones, have more decor options and most often hide less presentable containers with plants in them.

Ceramic pots are stronger and more expensive than clay pots. On sale, they may carry the same trade name, but when choosing, you must understand what you are dealing with.

Often, instead of expensive ceramic sellers, they try to sell cheaper counterparts (for example, from plaster).

Ceramic pots have their positive and negative sides that influence their choice and use.

Among the positive are the following.

• In its pure form, clay and other mineral additives are natural and do not have a negative effect on both vegetation and humans. Their production and subsequent disposal does not harm the natural environment.
• It is the pores, although they are not visible to the armed eye, that have a positive effect on the growth and development of the plant planted in them. The air passing through them saturates the plant tissues with oxygen, helps to evaporate excess moisture, preventing stagnation. In other words, such material breathes.
• Ceramics retains heat well. In hot weather, the pot will protect the soil from drying out, keep it cool.
• Ceramic products are quite heavy. This gives them stability. Despite the fact that the walls are quite thin, firing makes them hard. Only a fall from a height or a strong blow to the wall can cause damage. Since such cases are still rare, ceramics is considered a durable material.
• Ceramics are not afraid of water, overheating and exposure to ultraviolet radiation. Terracotta can even stand in the garden - weather conditions do not affect them in any way.
• All ceramic products have a presentable appearance. Previously, only wealthy people could afford them. Any natural material looks better than synthetic. Due to this, ceramics are often used to make flower pots, but their main function is decorative.

The presence of pores in unglazed products, although it is a positive feature, still has its own complaints. It doesn't suit everyone. Plants whose roots are sensitive to temperature fluctuations can get sick. This applies, for example, to orchids. And at a constantly low temperature in the room, the roots of even an unpretentious plant can freeze. It should also be borne in mind that through the pores, water can wash out not entirely useful substances from the material. They also leave stains on the front side of the pot, and it is almost impossible to get rid of this completely. Coated pots do not have these disadvantages. It is believed that with clay containers, difficulties arise during transplantation. It's actually a pretty quick process if done right. And the pots should be thoroughly washed from any material.

Another disadvantage is their cost. Simple clay models are cheaper. Glazed items are less readily available. The cost is partly justified by their durability.

Ceramic pots can be sculpted or molded with molds. In liquid form, the clay mass can take on almost any shape. Mass production through off-the-shelf molds limits the process a little. Most often you can find:

• rounded (including oval and semicircular);
• square or rectangular.

It is believed that a round shape, tapering slightly towards the base, is the most correct. So the distribution of water is more even than in rectangular ones.

But a handmade product made of polymer clay can look anything you like - in the form of shoes, animals, an abstract figure. The more bends in such a pot, the less useful area for planting will be. Among other things, some decorative parts - handles, moldings, can be made separately and glued to the workpiece using an adhesive mass.

The size depends on the destination. Landing can be:

• individual;
• group (in one container or in separate ones, but combined into a common design).

The dimensions of a ceramic flower pot also depend on its placement.

• Tabletop. So you can conditionally call placement on any piece of furniture or windowsill. In this case, the size depends on the reliability of the surface. The surface must not slope or be slippery.
• Wall mounted. They are fixed to the wall using hard and soft hangers. In this case, it is important not to forget about the outflow of water. The weight and size must correspond to the load that the fastener can withstand.
• Outdoor. Here you can place both small pots - using stands, and bulky models that are installed directly on the floor.

Pay attention to the proportions of the pot - its height should be equal to the diameter of the upper circle. The diameter of the top can be no more than a third wider than the bottom. Otherwise, the pot may be unstable. Resistance is also influenced by the size of the plant itself as it grows.

There is a rule that the height of the pot cannot be less than a third of the height of the plant or more than this value. But most of them don't need that much space.

The appearance of a ceramic pot largely depends on the vegetation planted in it.Bright colors and unusual shapes are suitable for discreet greenery of modest size. For a plant with flowers, the pot should be restrained - monochromatic, without relief and shine. After all, its main task is to emphasize the beauty of the flower.

Most often, the color of unglazed pots ranges from red to brown, with all sorts of shades. Rarer types of clay produce white, gray or dark brown (closer to black) colors of flower containers. All natural colors look unobtrusive and will suit any interior, especially ethnic or eco-style. They can be smooth or embossed. The simplest decor is grooves and dots. More complex - convex floral motifs, inscriptions, etc.

Copyright items are especially valuable. If you are in doubt about your own artistic ability, you can use stencils.

All kinds of additives allow you to paint the clay in other colors (for example, blue or green), create contrasting blotches. Bright shades must be present in other interior items - dishes, textiles. So they will not look alien. Glazed pots look better. Even transparent, it deepens the color and adds shine to the product. The color of the glaze on the inside and outside can differ, or even be contrasting.

The choice of glazed ceramic pots is really wide. They can be smooth or textured. Glaze can give them any color. And the drawings can be not only flat, but also three-dimensional.

The choice of a ceramic pot seems simple only at first glance. First you need to determine - what you need a pot for. A temporary option (for example, for transporting or germinating seeds) may be the easiest. For flower containers for permanent use, very different requirements are imposed. First of all, you need to think about the comfort of the flower, and only then evaluate the aesthetic qualities. And if these two points suit you, you have found the perfect option.

You need to pay closer attention to the following points.

• If it is the porosity of the pot that is important, it is quite simple to check this characteristic. If the walls absorb water, then this is what you need.
• The volume of the pot should be sufficient for a comfortable position of the plant roots. You should not choose a large one at once, it is better to transplant it a couple of times as it grows. In accordance with the shape of the root system, the depth and width of the pot are selected - elongated or low, wide or narrow.

• The bottom should ideally be either flat or with some bulge in the center so that the water can drain better. If the holes are few, you need to finish them yourself. To prevent the ceramics from cracking, special tools are needed.
• Then you should inspect the pot itself - the walls should be even, without cracks and chips. Pay attention to the outside - irregularities in color may indicate painted over defects. When installed on a flat surface, it should not wobble.
• Pallets are often sold separately. The pallets should have protrusions that provide some distance between it and the pot. If there are no protrusions, you can use flat stones.

When purchasing a pot for a particular plant, you need to familiarize yourself with the information about it in advance. For example, very tiny clay pots are needed for succulents. Bonsai should be planted in medium deep but wide containers. The volume of the pot is important for the most capricious orchids - excess soil with stagnant moisture can lead to diseases. They are transplanted as the roots grow, in a container with a slightly larger glaze. Onions do not need a lot of space, even if they are planted in groups, but a good drainage system is important.

Together with the containers, you can buy a planting kit - the necessary equipment, soil of the desired composition, fertilizers and drainage material (in the form of round pebbles). After purchase, potted products must be soaked whole in water for a couple of hours. Previously used ones must be well cleaned of soil - for this you can use a brush or sponge. Soda solution is preferable to household detergents. If there was mold in the soil, the containers can be boiled - this will not affect them in any way, since each one goes through firing.

For information on how to make a beautiful ceramic pot with your own hands, see the next video.