How to attach a veranda to the house with your own hands: a step-by-step description of the work

Attaching a veranda to the house with your own hands is not an easy task. Despite the fact that this lesson is quite difficult, you can still do all the construction work with your own hands. You just need to follow the step-by-step description.

Many do not fully understand what a veranda really is, mistaking a terrace for it. Verandas are not divided into open and closed. The SNiP clearly states that this name is attached to the house or built into it a glazed structure, and the so-called "open veranda" is a terrace, and nothing else.

So, a veranda has all the same functional parts as a residential building: doors, windows, walls, a roof, even its own foundation. The only difference is that heating cannot be carried out on the veranda, otherwise it will automatically turn it into an additional room... However, many neglect this requirement, but in vain, because the decision to insulate an extension in this way can have dire consequences.

Speaking about the features of the veranda, it should be said that it is not only a great place to relax, but also a wonderful way to expand the space. It is often used as a hall, which is due to the fact that traditionally verandas are erected so as to "capture" the front door. Building otherwise is impractical, because to get to the veranda, you have to go outside every time, and this is inconvenient.

If you equip the veranda correctly, insulate it, glaze it properly, then it will not be cold in winter or hot in summer. Keep in mind that you are very fortunate if the front door of your house was located on the west or east side: the veranda built here will be better protected from the sun most of the day.

This will create a corner of relaxation suitable for both winter and summer holidays.

Verandas are designed in various stylistic directions, making sure that they are in complete harmony with the house. So, if the exterior of the house is made in high-tech style, then the veranda must be made as high-tech: with large frameless windows, for example.

In a simple folk or rustic style, you need to focus on rough materials, using stone and wood for construction. A delicate Provence model will look great on a garden plot, especially if you break a flower garden in front of it.

Glazed extensions are made of various materials: wood, brick, even plastic. Wooden verandas are the most popularbecause wood is easy to work with and also has a long service life.

The extensions also differ in size: there are small, "capturing" only a small part of the house and doors, or large, stretching over the entire wall (this technique is often used in the construction of verandas near small houses). The size also depends on how many people live in the house.... You need to think about how they can all sit here at the same time.

During construction it is necessary to take into account the size of the house itself, and make a start when choosing the dimensions of the veranda also from this.

The greatest difficulties are not the construction itself, but the bureaucratic red tape with the legalization and approval of the construction. You need to start walking through the authorities three to four months before the start of construction work, because this process is long and exhausting, but necessary.

So, glazed verandas fulfill several functional roles. Firstly, they help to insulate the house as much as possible. This is due to the fact that the front door is protected from drafts, and the wall with the veranda will require less energy for heating than the others, because it will not be exposed to winds or strongly contrast in temperature with the environment (on the veranda in winter the temperature is about 11 degrees higher than in the yard).

Also, the greenhouse effect, which could be a minus of the building, in this case plays into the hands. The sun's rays falling inside the extension heat the surfaces, but the heat does not go anywhere, but accumulates and lasts for a period. Insulation is one of the cases when such a clear functional difference can be traced between the veranda and the terrace.

In the summer, you can use the extension as a full-fledged living room, equipping it, for example, for a gym or an additional bedroom. In winter, here you can store large-sized seasonal items for which there was no place in the house itself, but they cannot be stored outside.

It just so happened that terraces are built to open a view of a beautiful garden, mountains or something else. But it happens that the plot is extremely small, and all the view that can be provided is a fence between yours and the neighboring plot.

In this case, the veranda is an excellent way out, because, due to the glazing, it will distract a little from the impartial sight.

In summer, the climate on the veranda is more comfortable than in the rest of the house. The optimum temperature is maintained here, so many people equip summer bedrooms in the annexes. It is pleasant to spend the night here: a comfortable temperature is provided, and the glazing protects from mosquitoes and other insects.

It is important to correctly determine the dimensions of the veranda, not only relative to the house, but also thinking about how you will use it in the future. So, for a one-time accommodation of 10-12 people, you will need a veranda with an area of ​​at least 15 sq. m.

If you are a fan of gardening, then you can adapt the extension to a winter garden... It provides excellent climatic conditions, as in the subtropics, as well as an excellent degree of illumination.

Some types of houseplants scattered throughout the veranda will look attractive, bringing the space to life.

If desired, several functional areas can be combined on the veranda, for example, by combining a winter garden and a seating area. To do this, you just need to increase the area of ​​the extension.

Decide how much space you need for a greenhouse (depending on the number of plants), and how much for gatherings with friends (depending on how large the company will usually gather), and then you will precisely determine the required area.

The veranda is used as an ordinary storage room throughout the winter. You can drag garden furniture or other inventory onto it.

In winter, you can make an extension with a vestibule, taking off your shoes in it, leaving sledges, skis and other sports equipment.Some leave outerwear here, but this is not very convenient, since putting on cooled wardrobe items in the winter is a dubious pleasure.

Since the veranda is almost a room, except for the presence of heating, then it has similar advantages. However, in rare cases, heating on the veranda is still carried out: for example, when a winter garden is equipped.

So, speaking about the pros, the following can be distinguished:

• Sun and rain protection... In this case, the function of the walls is carried by large windows that protect the space inside from wind, rain, snow, as well as exposure to the sun. You can stay on such a veranda even when it is raining outside, without fear of catching a cold or accidentally getting wet. In addition, such security has a beneficial effect on the family's budget: there is no need to purchase additional protective materials to protect the walls inside the veranda.

• Can be used as a storage space... It is not necessary to turn the veranda into a garbage warehouse. This can include the necessary, but rarely used things, for example, books, which all the hands will not reach, or conservation, using a veranda instead of a cellar. Furniture that is no longer needed will look great here, but it is a pity to throw it away, because it is still in good condition.

• The ability to carry out heating, equip a ventilation system... In order to carry out such work, you need to obtain a special permit, coordinate everything with the authorities. Nevertheless, it is possible to make heating on the veranda or install a split system. It is good if the heating is not general, but isolated, with an on and off function. This will make the operation of the heating system more convenient.

• Use as a sleeping place... For many, sleeping in nature is part of their summer vacation. You can get rid of all the negative factors of this activity (the likelihood of rain, annoying insects) if you sleep on the glassed-in veranda. Thanks to the large panoramic windows, the connection with nature will not be lost, and at the same time, the comfort of an ordinary residential building will not be lost.

There are drawbacks to glazed verandas, despite all their advantages.

Here is some of them:

• Heating is ineffective... In order to properly heat the veranda, a huge amount of thermal energy is required. This is due to the fact that the extension is not insulated as thoroughly as the house, so some of the heat will be lost and go outside. So, even with heating or with an equipped split system, it will be difficult to maintain a constant temperature in the extension: in summer it will still more resemble a greenhouse, and in winter the temperature in it will be only 10-12 degrees higher than outside.

• Limiting visibility... Even despite the fact that the windows on the veranda can be made panoramic, making sure that the frames are almost invisible, you still cannot get the full sense of nature, as on the terrace. Isolation from smells, sounds, drafts is good when viewed from one side. However, on the other hand, a country or suburban vacation is valued just for the feeling of unity with nature. In addition, if you make the windows not panoramic, then on a fully glazed veranda you will feel not like outside the house, but as in it.

• The need for stylistic selection... You can't make a veranda whatever, like, for example, a gazebo. It is imperative to ensure that the exterior of the house and the veranda are stylistically equivalent. For example, if the house is decorated in a Mediterranean style, then the extension will have to be decorated with arched openings, revetted with stone, and do many other decorative elements.

Thus, we can conclude that the glazed extension has advantages that completely balance all of its disadvantages.

Verandas are built from a variety of materials. This is due not only to its functional purpose, but also to the landscape that surrounds it, what is the exterior of the house. However, extensions are most often made of wood or brick.

These materials have all the necessary qualities:

• they are durable;
• look attractive;
• easy to work with;
• excellent "friends" with heat-insulating materials and others.

Wood is one of the most popular options, which does not concede its positions to new materials: aerated concrete, sandwich panels, polycarbonate. Verandas from a bar or a log house look cozy and home-like. Often such options are chosen for summer cottages., because in the country you want to relax and unwind. However, wood is not only used as a basic material. In particular, frame structures are often made of wood, the floor is laid out with a board.

The second most popular is brick... Brick verandas are mostly winter, with high-quality insulation. They are organized in year-round residences.... Working with bricks requires some skill, but the result exceeds all expectations. Besides piles can be made of bricks for the foundation.

Compared to wood, brick wins only because there is no need to wait for the material to shrink in order to glaze the veranda. So, it can be built in one season.

It is worth noting the metal, which is also used in the construction process.... Screw piles are made from it, which are selected on a par with brick ones, since they are easy to install. A profile pipe is chosen for the frame. The metal profile is reliable, strong, it is often impregnated and treated with all kinds of compounds against corrosion processes, so that such a frame will also be durable.

You can make a veranda from metal corrugated board if you are on a budget, however this option is not very attractive aesthetically, is traumatic, does not keep warm.

The polycarbonate panel structure looks interesting and unusual... Glass extensions of this type are partially transparent, but at the same time they can be colored. They let in a lot of light, but protect from prying eyes (except for the glazed parts), because polycarbonate is cloudy.

Due to the special structure of polycarbonate panels the material keeps heat well, provided that the joints between the panels are well sealed... Such verandas are often not additionally insulated.

The development of recent years is materials that allow you to build verandas quickly. For operational construction, foam blocks and aerated concrete blocks are used... A significant difference between materials from each other consists only in moisture and frost resistance: aerated concrete loses a lot in this respect, since it absorbs water like a sponge. However, it is worth remembering that simple walls made of these cellular materials do not leave. They must be faced with siding, tiles or other material.... Therefore, the frost resistance parameter can be ignored.

It is easy to insulate aerated concrete or foam block walls, while the thermal insulation will be at a sufficiently high level.

Drawing up a project plan is an important step. The decision to rebuild the house, to complete the veranda here is a redevelopment. So, the drawn up project must be legalized before proceeding to construction workotherwise, during the sale, donation, or inheritance of a house, problems may arise with the fact that the real estate according to the documents does not coincide with the actual one. Owners can be subject to severe fines.

Since it is necessary to create drawings and diagrams correctly, carry out all calculations correctly and without errors, and the best solution would be to seek help from professional architects. This is especially true if you plan to make a large and maximally equipped extension, for example, if you plan to equip a bathroom or full heating here. Professionals will quickly and efficiently draw up a project plan, which will be approved by the authorities without any complaints.

For some, the decision to go to the professionals seems costly, so they decide to draw up a plan on their own.

Before developing a project, it will be necessary to decide on several provisions, the first of which is the location of the veranda relative to a private house. So, the veranda can be corner, end or front... The corner one covers two adjacent walls at once. Usually, such extensions are made large, roomy, combining several functional areas in them at once (for example, a kitchen and a living room).

The front is attached accordingly from the front side of the house, with the wide part of the veranda to the wall of the building. Such extensions are the most popular.

The butt-end option is of most interest because it is the least common.... Here, the veranda adjoins the wall of the house with its narrow side - the end, and it turns out that it seems to protrude, giving the house an intricate architectural look. The extension does not cover the entire wall, as is often the case with the facade.

End options are often built for conservatories and greenhouses to provide maximum access to light for plants.

Having decided on how the extension will be located relative to the house, they move on to determining the shape. Most often there are rectangular, round or semicircular and polygonal options. The simplest to erect is a rectangle... Here you do not need to have any specific knowledge in order to correctly make a foundation or erect walls.

A polygonal variation (usually a hex or octagon) does not require much either., since it consists of straight edges, but semicircular and round verandas are the most difficult to make... It is necessary to carry out specific calculations, correctly select the load on the foundation, not to mention the fact that the construction work itself will take more time and require additional efforts.

The choice of design features is not provided here, since verandas are of only two types: built-in and attached. Since the built-in version is planned at the stage of drawing up a house drawing, it automatically disappears.

An attached veranda is more difficult to cope with, however, it also has its advantages. For example, during the construction of a house, you can refuse to build it by completing the structure later, when finances allow it. It is necessary to approach the drafting of the project with all responsibility, since in the future not only the beauty and convenience of the attached structure will depend on this, but also the legality of its equipment on the site.

The first stage of preparation is the registration of a building permit. It must be obtained before all work is carried out.

To do this, you will need the following documents:

• available design drawing of the house;
• developed veranda project;
• certificate that you are the owner of a residential building and a plot;
• a statement that you want to remodel your home.

After all the documents are drawn up and permission is received, you will need to start preparing the site. First of all, it is necessary to completely clear it of debris. Also, be prepared to get rid of all green spaces: grass, trees, flowers, and also remove some of the turf. Prepare the façade by removing the visor and porch.

If a balcony on the second floor is organized right above the entrance, you will have to puzzle over how to correctly use it as part of the roof structure of the future extension.

Next, proceed to pouring the foundation. It is referred to as preparatory work, since in the future you will have the right to choose what to build here - a terrace or a veranda.

The foundation device can be anything, but most often tape or pile options are chosen, each of which has its own advantages. Unlike the pile, the tape option will allow you to insulate the floor in the future..

So, the strip base is made as follows:

• Knowing the design size of the veranda, it is necessary to mark the site in accordance with the plan. This can be done using stakes at the corners of the future extension and a rope stretched between them.
• Next, you need to dig a trench along the perimeter of the marking. Its width should be about 50 cm, and its depth should be the same as the height of the foundation of the house. If it is not possible to find out the height of the base of the house, then pay attention to the type of soil. Depending on how heaving it is, the trench can be 1-2 m deep.

• For formwork, take wide boards, knock down a box from them a little wider than the trench. The height of the formwork should be equal to the height of the finished foundation, like that of a house. Install the formwork.
• Strengthen the bottom of the soil with a pad of sand and gravel, carefully pouring water over it. Make several layers, alternately pouring river sand, then gravel, pouring water each time.
• Install the reinforcement so that it is 10 cm from the walls of the trench and 1.5 cm above the ground.

• To prevent the cement mortar from flowing out of the box, cover the walls of the formwork with roofing material.
• Next, fill in the concrete solution. Thoroughly level it with a shovel until it grips to keep the foundation as even as possible. Leave to dry for 30 days, covered with plastic wrap to protect it from precipitation.

The instructions for making a pile foundation (also called columnar) are as follows:

• The marking is done in the same way as for the strip foundation.
• Next, they dig holes 1.5-2 m deep, depending on how heaving the soil is. The width should be 10-15 cm in diameter more than the diameter of the posts.
• The bottom of the pit is reinforced with a gravel-sand cushion.
• Piles are installed and poured with concrete. If they are hollow inside, then you need to fill them. For this, crushed stone, gravel, slag are suitable.
• After the structure is dry, waterproofing is done with hot bitumen. They just fill it with it.

After the foundation is made, you can proceed directly to the construction of the veranda.

The construction of the veranda begins with the creation of a subfloor, which must be equipped immediately after the construction of the foundation is completed. First, treat the base with roofing material, laying it in two layers. Keep in mind that you will need to choose which floor to mount: wood or concrete.

For a light timber structure or timber frame, wooden floors are suitable, while for a more solid brick extension, concrete is better..

You can make a rough wooden floor yourself if you follow the step-by-step instructions:

• To begin with, attach the lower strapping in the form of a bar to the foundation using anchors or bolts. Use galvanized nails to hold the beams together.
• Next, you need to fasten the wooden logs to the lower strapping. The distance between them should be 50 cm. Such a step will ensure sufficient reliability of the floor structure. For fastening, use anchors and galvanized nails, as when fastening the lower strapping.
• Insulate the floor by filling in expanded clay in the cavity between the logs.
• Make the flooring. To do this, use thick plywood from 5 mm, fixing the boards with self-tapping screws or galvanized nails to the floor.

To make a concrete version, use the following method:

• Pour sand on the roofing material in a layer of 10 cm.
• Cover the sand with a layer of expanded clay on top.
• Lay the metal mesh (reinforcement). The diameter of the section of the rods should be from 6 to 8 mm, and the area of ​​the cells should be 25x25 cm.
• Fill with concrete, the thickness of which should be 30-50 mm. To make the layer as even as possible, use beacons, setting them at a distance of 2-4 m from each other. Be sure to use a spirit level to check for evenness.

Next, proceed to the construction of the frame. For both insulated and non-insulated veranda, it will be the same... The same goes for the roof, except that for a winter veranda, it will need to be additionally insulated.

The frame can be made of almost any material, however most commonly used wood... To create a lathing, a beam is suitable, the cross-section of which is 10x10 cm.

Cut special grooves in the beams at the base, into which vertical pillars will be installed in the future. Install the verticals using brackets (the solution to combine the installation in grooves and brackets guarantees maximum reliability of the frame structure).

Install the upper harness bar in the same way in the grooves, thereby creating a low harness. It should be borne in mind that on attached verandas, one slope is usually made lower than the other.therefore, the vertical supports on the opposite side of the adjacent wall should be 50 cm lower.

To make the top harness, you must first fasten the highest and lowest racks, and only then fasten the intermediate ones.

When the top rail is ready, it's time to lay the roof rafters. The rafters are attached to the harness by means of anchors, and the cross beams with the longitudinal ones are fastened with self-tapping screws. The distance between the rafters should be 50 cm... This will allow the roof to further support the weight of the roofing material. For rafters, a bar with a section of 10x20 cm is taken... Next, the frame is sheathed with the selected material (for example, plywood).

With brick options, everything is much easier. Here they immediately move on to laying out the walls, getting a warm and durable building.

So, the following types of masonry are most suitable for independent work:

• spoon;
• bonded;
• chain.

The bricks are held together with cement mortar. During laying out, it is important to check the level of evenness of each row.: it is highly likely that an inexperienced master will "lead" the masonry. After the solution hardens, the reinforced belt is arranged, the upper strapping is made of wooden beams, and a frame is made of wood for the roof. In this case, the cladding does not need to be performed.

The roof and ceiling are made depending on which version of the veranda is chosen: summer or winter. In the first case, the roofing is laid on the rafters without thermal insulation materials, and in the second, the thermal insulation is first laid, and then the roof material.

The summer veranda differs from the winter one in the absence of insulation. If in an open terrace there is only a fence without any hint of walls, then in a veranda, even a summer one, there must be walls or their like. One of the options is to organize the walls on the frame as easily as possible, while making them transparent - PVC film... Such peculiar PVC windows will open the maximum view of the site, but at the same time they will be well protected from rain and sunlight.

Additionally, flexible curtains can be equipped with panels that will unfold from the inside, blocking access to light (they can be called sun curtains).

Tying the PVC film is as easy as shelling pears: it is attached using special straps or wire, which can be quickly dismantled if desired. Despite the fact that the option is called summer, it provides excellent thermal insulation characteristics, which may not be very good in the summer: the air inside gets very hot, but its movement does not occur and a greenhouse effect is created.

Another option is from plywood... In this case, the seams are not laid with special insulating materials, but remain as they are. Only painting work is done.

Even despite the full glazing of the extension, air exchange will not be disturbed, and an optimal and comfortable microclimate will always be maintained on the veranda.

The decision to make a polycarbonate veranda (either completely or just the roof) is bold and risky. The material perfectly transmits the sun's rays, but does not allow heat to escape. That's why you will need to take care of the construction of a high-quality ventilation systemif you want the microclimate to be optimal.

It is worth keeping in mind the positive feature that the rebuilding or dismantling of such a structure can be performed in the shortest possible time: the polycarbonate panels are fastened with ordinary screws, and in order to disassemble the veranda, the screws will only need to be unscrewed.

An interesting option is the manufacture of a veranda from various metal structures... For this, you can use, for example, corrugated board. Metal verandas look less attractive than other counterparts, moreover, they are not very convenient to use: under the influence of sunlight, the metal heats up, which is why the temperature in the extension rises significantly. But the metal will protect well from rain and wind.

Do not forget that you will need to build a staircase and a porch. Some people make railings, especially if elderly people live in the house. In some cases, the need for railings is due to the fact that with them the porch looks stylistically more correct, more harmoniously combined with the house.

On summer verandas, you can do without a door between the porch and the extension itself, hanging here only curtains made of some material (for example, PVC or tulle). When making a veranda from synthetic materials, such a solution will provide proper access to air, thereby making air exchange more intense and leveling out all negative factors such as the greenhouse effect or too high temperatures.

A warm extension is done somewhat differently than a covered summer one. The first difference is the materials. So, when building a winter version, they definitely use solid and reliable materials: wood, brick, gas or foam blocks.

Wooden verandas are built from a log house or a bar... The positive point is that you can insulate wooden walls even at the stage of laying out the crowns. This saves time.

As insulation, you can use both synthetic materials (mineral wool, foam) and natural (tow, felt, moss).

Of course, it is better to give preference to natural materials, since they have a number of advantages:

• environmentally friendly;
• have good thermal insulation characteristics;
• do not collapse during operation;
• do not emit substances harmful to health.

Brick verandas are most often found in houses of permanent residence.... The brick construction is a priori closed, so it makes no sense to equip it for the summer version.

Such verandas are insulated from the inside using mineral wool and foam. However, be careful: you should not choose polystyrene if you plan to equip a kitchen with a stove on the veranda, build an oven or fireplace... When heated strongly, the foam emits extremely dangerous carcinogenic substances that can cause significant harm to human health.

It is important to pay special attention to window insulation. If the choice fell on plastic windows, there is nothing to worry about: they are already produced in such a way that they provide maximum protection from wind and cold. Wooden or aluminum frames need to be additionally treated with polyurethane foam or choose a different method of sealing all gaps... For the winter, such windows are caulked.

Extensions made of aerated concrete or foam blocks must be insulated from the outside, however, the main focus here is on the thermal insulation of the ceiling. It should be borne in mind that such insulation will not give the desired effect. The veranda will only be partially insulated. Nevertheless, when insulating walls, they prefer mineral woolas it is she who works best in tandem with these modern building materials.

Separately, it is worth taking apart the floor insulation. To do this, use expanded clay or equip a "warm floor" system. If you choose the second option, you should be prepared for the fact that the electricity costs will be phenomenal, while there is no guarantee that the veranda will be as warm as in the rooms.

In order for the "warm floor" system to work as efficiently as possible, there is one rule: all gaps in the base of the floor must be sealed.

If it is planned to put a stove on the veranda, then in that place it is necessary to additionally strengthen the foundation. For this, you can use reinforcement.

Also it will be necessary to lay a thick iron sheet in the place where the fireplace or stove will be located... It is advisable to protect the space in front of the fireplace so that accidentally falling out coals do not burn the floors.

When starting to repair and decorate a veranda, it is worth remembering that it can be considered as a full-fledged room, but at the same time, do not forget that it is still not a room. We must take into account the special climate created here.

Finishing traditionally starts from the ceiling... There are a couple of requirements for the material that is chosen for the design of the ceiling: its lightness and resistance to moisture. That's why materials such as PVC panels, polycarbonate, lining and unusual wicker are optimal... When installing each of the options, it will be necessary to arrange the joints with the walls with baseboards to ensure maximum evenness of the coating.

Clapboard cladding is suitable not only for ceilings, but also for walls... The design of the room, sheathed with this material, turns out to be home-like, cozy and at the same time stylish. When installing this material, it is worth remembering that it expands over time, therefore it is best to leave gaps between 7 mm wide strips.

The advantage of PVC panels is their lightness. In addition, they are perfect both for decorating the ceiling on the veranda and in the house. The ceiling is perfectly flat, the joints are not visible.

Due to the fact that the material is sold in a huge number of colors, it helps to bring almost any creative idea to life.

Polycarbonate is used not only for decorating ceilings, but also as a roofing material. It is durable yet lightweight and comes in a wide range of colors. Polycarbonate panels are of two types: monolithic and honeycomb.The difference lies in the price and in the fact that the latter have improved thermal insulation qualities.

Polycarbonate is a modern alternative to glass without its inherent disadvantages, such as heaviness and fragility.

The wicker ceiling is made up of mounted panels made of tied bamboo shoots. This option gives the atmosphere a special charm, rustic or tropical flavor. Shields must be additionally secured with transverse strips, otherwise the structure will not be strong enough.

The walls of the veranda are sheathed with clapboard, PVC or MDF panels or decorated with decorative plaster... Each of the options has its own pros and cons. Since the lining and PVC panels were discussed above, it is worth dwelling in more detail on only the two remaining materials.

Decorative plaster can be used both to imitate other material (for example, stones), and represent an ordinary relief coating for painting.

To get a certain appearance, you need to pay attention not only to the choice of the type of material ("liquid wallpaper", colored, stone), but also to the application technique.

MDF is an environmentally friendly material, but this is far from their only advantage. Sheathing with MDF panels will provide good noise and heat insulation, high resistance to temperature extremes. In addition, this material is easy to work with.

There are also several floor options for the veranda. Most often used:

• terrace board;
• rubber;
• concrete;
• tile;
• linoleum.

The simplest is a concrete floor, which is often left in summer verandas. Such a coating will additionally cool the room, as a result of which coolness will be guaranteed in the summer. It will be cold in the outbuilding in winter.

Linoleum can be laid directly on a concrete base... Depending on which linoleum is chosen, additional advantages will appear, for example, thermal insulation, impact resistance and others. Of course, each of their characteristics increases the price.

Rubber flooring, decking and tiles are laid out according to the mosaic principle... Each of these materials is highly resistant to moisture, temperature fluctuations and mechanical stress, and it is easy to care for them.

The most necessary things are usually taken out of the furniture to the veranda: tables, chairs, sofas. If the extension is used as a summer kitchen, you can also "settle" a small sideboard for dishes here, add several wall cabinets.

They usually don't put a bed on the veranda, preferring to use a folding sofa for sleeping.

The veranda should be in the same style as the house. It looks most advantageous when the walls, the roof, and the foundation are made of exactly the same material.

The Provence style wooden extension looks great. Here, the presence of a roof was not provided. The roof is played by the balcony on the second floor.

Fully transparent verandas are a tribute to modern traditions. For glazing such options, the latest materials are used: polycarbonate, polyvinyl chloride and others.

In some cases, it is possible to draw the curtains in the annex, allowing light to penetrate only through the ceiling. This creates a special atmosphere of intimacy. At the same time, this approach ensures the optimal temperature in this peculiar room.

High-tech terraces can be performed both in a classical form, and as bay windows - parts protruding from the walls, the so-called end extensions. However, it is important to remember that the shape should be strict: polygonal, rectangular, square.

An interesting version of a veranda made of wood and glass is presented in the next video.