How to properly steam a broom for a bath?

Bath procedures using a broom give strength to a person, have a beneficial effect on the immune system, and contribute to the health of the body. To get the maximum effect, you need to properly steam this pairing accessory. The process is simple, but the procedure has some nuances. If you make mistakes when steaming, the broom will lose most of its healing properties.

Bath brooms are different - they are made from twigs of birch, juniper, oak, linden, conifers. There are mixed products that combine 2 or more types of branches. These bath accessories are fresh and dried. For steaming each type of product, there are several general rules that are important to follow in order to conduct an effective and healthy massage.

The preparation process includes several stages.

1. External examination, removal of bare twigs and damaged leaves. If necessary, re-dressing is performed so that the weak broom does not fall apart in the hand during work.
2. Rinsing under running water. Rinsing is necessary to wash off dust and remove residual dirt. This is the best way to prepare foliage and stems for further steaming.
3. When steaming, it is important to follow the process. If you overexpose a broom in boiling water, its leaves can go limp and the stems become limp.

You should not pour the water out of the steamer - it can always be used. This liquid is a healing natural infusion that can be used to rinse your hair or body. It nourishes the hair shafts and skin with nutrients.

Bath brooms are soaked in hot, warm or cold liquid. The water temperature depends on the type of bath accessories used. For example, birch or oak products must be soaked at home in cold water for 30 minutes before going to the bathhouse. After this time, they need to be turned over to the other side and wait half an hour. This time is enough for the rigid branches to acquire additional flexibility and elasticity.

It is advisable to soak overdried accessories in cold liquid, and then hold them over hot steam, while gently shaking the foliage to prevent it from sticking together.

For steaming a coniferous broom, different rules apply. Such products should be used only fresh - dried ones will not work, since they will be highly prickly and, when dried, will lose some of their healing properties.

The main difference between coniferous products and deciduous ones is the need for steaming them in hot water. To do this, you need to take a new broom and brew it in boiling water. The high temperature of the liquid will soften the needles and evaporate the aromatic essential oils. To prevent these substances from volatilizing, after immersing the product in a liquid, the steamer must be covered with a lid.

There are several methods for preparing a broom for couples. It should be noted that steaming of fresh and dried bath accessories is different.

Fresh deciduous branches do not need preliminary preparation. To prepare a broom, rinse it under running cold water, then hold it in warm water for 5 minutes. A common mistake is increasing the aging time of fresh branches. In this case, the foliage will be partially devoid of beneficial properties and aroma.

Dry brooms are subject to compulsory stripping. When exposed to hot water, their leaves will become soft and the branches elastic. There are several ways to prepare dried bath accessories for use.

1. Leave the product in cool water for about 20-30 minutes. Then the cold water from the steamer is changed to hot (it is not recommended to use boiling water) with a temperature of 50-60 degrees. A broom aged for 5 minutes can be used as directed.
2. This method helps to "transform" dry brooms into fresh ones. For its implementation, it will take at least 15-20 hours - during this time, you need to soak the product in cool water. In this case, it should be turned over several times from one side to the other. The finished accessory will practically not differ from a fresh, just assembled broom. With this cooking method, additional exposure to hot water is not required.
3. A method that is relevant for sudden trips to the steam room. It is often resorted to in cases when time is running out. To prepare a dry deciduous broom, pour boiling water over it, cover it with a lid or a basin, and leave it for 5-10 minutes to steam.
4. This method is relevant for the preparation of overdried products. For steaming, you need to alternately process the accessory with boiling water and steam emanating from hot stones.
5. A method in which a broom is steamed in a bag. To prepare bath accessories, you need to rinse it with warm and then hot water about 5 hours before going to the steam room. The remaining liquid is shaken off the foliage with sharp movements, after which the branches are placed in a plastic bag for about an hour. After that, the product is taken out and held over the hot stove. The final stage is to place the broom in a steamer with warm water for a couple of hours. The finished broom can be used immediately or left in cold water with the handle down.

Many are interested in the question of whether it is possible to use the same broom for a bath repeatedly. The product is capable of retaining aroma, medicinal therapeutic properties and appearance, subject to the rules of steaming and storage. It does not matter which branches were used - birch, coniferous, oak, linden or others.

Storage preparation and drying rules:

• after pair manipulations, the broom must be rinsed under a stream of warm water and shake off excess liquid;
• each branch of the broom should be straightened;
• the broom prepared in this way is suspended with the handle up in a dry and warm room (for example, in a dressing room), while avoiding direct sunlight.

After drying, the product must be placed in a piece of natural cotton or linen fabric and put into a plastic bag. Brooms must not be dried at high temperatures, as well as in rooms with high humidity. It is allowed to put the broom in the freezer or take it out to the attic.

To maximize the effect of visiting the bathhouse using a broom, you should heed some advice on drying the product, steaming it and then using it.

1. Dry the assembled broom under natural conditions at a temperature of 15-25 degrees, avoiding drafts, direct sunlight and high humidity. It is best to dry the garment hanging.
2. Subject to the storage rules, the shelf life of the bath accessories is at least 1 year.Darkening of the product will indicate its dampness. It is best not to use brooms with darkened leaves, mold or crumbling needles on coniferous branches.
3. Bath brooms can be used repeatedly, however, with each subsequent use, they will lose some of their useful properties. Deciduous products can be used up to 3 times, coniferous - no more than 5.

A properly prepared and steamed broom is fluffy and flexible. It is able to deliver the maximum volume of essential oils and beneficial components.

For information on how to properly and quickly steam a broom for a bath, see the next video.