All about Smeg hobs

Content
  1. Varieties
  2. Peculiarities
  3. Advantages and disadvantages

The Smeg hob is a sophisticated household appliance designed for indoor cooking. The panel is installed in a kitchen set and has standard dimensions and connectors for connection to electrical and gas systems. The Smeg brand is a manufacturer of household appliances and devices from Italy, which, in order to achieve high consumer qualities of manufactured products, scrupulously approaches the choice of suppliers of components.

The engineering thought of Smeg employees is aimed at producing a quality product at the lowest cost, which is important in a highly competitive environment that takes place in the category of household kitchen appliances.

Varieties

Smeg brand devices are distinguished by high quality workmanship, modern design, and a variety of models that can satisfy the needs of the most demanding customer. There are the following types of hobs.

  • Built-in gas hob - the main difference from other kitchen appliances is that this panel uses natural gas to obtain cooking energy. At the same time, it can be delivered to the place for cooking both through pipes and in specialized gas cylinders. There are from 2 to 5 burners, the location of which may vary depending on the design developed by the designers.
  • Electric hob - in this case, from the name it becomes clear that electricity is used for cooking. At the same time, in the room where the panel will be used, a prerequisite is the presence of an AC 380 V, 50 Hz electrical network. If this condition is absent, then the connection of the electrical appliance is not feasible.
  • Combined hob is a combination of gas and electric panels. This device has all the advantages of using both types. Accordingly, the requirements for their connection and use contained in the instructions are mandatory. For the consumer in this case, it is important to use both gas and electricity, hence various combinations and savings are possible when paying for consumed energy. In turn, electrical panels can be divided into induction and classic.

Peculiarities

The gas panel requires strict adherence to the instructions for choosing a place for its installation, the use of hoods. A necessary connection requirement is to be carried out by specialists of the gas service with a mandatory mark about this in the passport for the purchased device. There are gas hobs with two, three or four burners. Accordingly, the size of the hob depends on the number of burners. The 2-burner appliance can be used by a family of 2 when the amount of food to be cooked is small. At the same time, in order to better use the surface, the hob can be equipped with burners with different diameters.

Also in Smeg gas hobs a burner has been developed that has a double or triple "crown". It is characterized by holes on the circles of different diameters through which gas escapes, which ensures a more even heating of the cookware installed on top.

Accordingly, the cooking time and quality indicators are reduced. Also, this manufacturing principle entails a smaller amount of used gas fuel.

Also, in gas panels, a cast-iron or metal support is used - a grate, directly on which the dishes are installed when using the device. Cast iron is more durable, but much heavier than metal. The choice of this or that lattice depends on the preferences of the consumer, the availability of a particular model from the seller, etc.

Another important component of using gas devices is the presence of windows and hoods in the room. Due to the fact that the gas is colorless, odorless (although the relevant services add a special fragrance for the smell), and is also a very flammable substance (explosive at a certain concentration), it should be possible to ventilate the room. You can use electric fans in the hoods, including those that turn on automatically.

Almost all Smeg gas panels are equipped with an automatic electric ignition. It consists of piezoelectric elements that create a spark and ignite the gas when switched on. The panel can use both separate batteries (autonomous connection) and the 220 V network, which is available in the room. The special design and location of the burner control knobs is an additional insurance against the use of the panel by children and animals for other purposes.

Smeg electrical panels were developed by Italian designers and engineers in full compliance with the requirements of the legislation of the Russian Federation in the field of using such devices. A feature of the classic electrical appliances of this brand is the presence of various heating elements. A special system called Hi-light burners has been developed.

This system is obtained using various sensors and sensors. It allows you to change the amount of energy used for cooking, depending on the size of the cookware, and is also able to completely turn off the panel or part of it if there is no cookware on it. This system allows more rational use of electrical energy during the operation of the device, which entails economic benefits.

The Smeg induction hob is distinguished by the fact that its surface remains cold during use. This type of panel can be equipped with special coolers inside that blow the heating element. In this regard, it is not recommended to install induction-type panels over ovens, since the cabinets emit a large amount of heat, which can affect the operation of the induction hob.

Another feature is that the dishes must have a bottom made of a special material that heats up from the influence of magnetic induction fields. Ordinary dishes will not work for the device in question. This is a disadvantage, since it will require additional material costs, but it protects the health of children and pets that may be nearby. It should be noted that an induction cooker consumes slightly less electricity than a classic one.

Smeg hobs are also available in dominoes. In this appliance, areas are marked on the surface for leaving hot dishes or for parts of fried food (for example, fish or meat, especially when cooking is not yet finished). These can be gas, electric or combined devices.

Advantages and disadvantages

A positive feature of Smeg hobs is that these are devices presented in a very wide range. Surfaces can be made of ceramics, tempered glass, glass ceramics, stainless steel. The variety of shapes of the hob itself, burners, grates will satisfy the requirements of the most demanding customers. Particular attention is paid to the safety of using the products.

On the negative side, it is important to note that certain models have only dark colors, and some only black. In general, the pros and cons of the panels under consideration are typical for any such devices.This article discusses only some of the features of Smeg hobs.

The choice depends entirely on the consumer, and the variety of models implies a more thorough study of them for each specific case.

In the next video, you will find an overview of the Smeg SE2640TD2 hob.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture