At what height from the floor and how is the bath installed?

The convenience of a bathroom is an important component of a comfortable stay in a particular room. In order to be able to shower, wash or do any other procedure in the shower or toilet, it is important to have free access to everything you need. If the shower room has sufficient dimensions, it will be much more convenient to install the bathtub so that you can take various options for water procedures. When buying this product, you need to clearly know how to install it and at what height from the floor it should be for ease of installation, cleaning the sewer, and of course, use.

In the process of repairing a bathroom or simply replacing the bath itself, it is necessary not only to choose the right container for taking water procedures, but also to install it in accordance with the norms. The convenience of using it depends on the size of the bathroom. It should be deep enough to hold water in itself, preventing it from splashing around the room, but at the same time comfortable so that an adult child or elderly person can climb into it.

Regardless of what kind of bathtub will stand in the room, it is important to put it at the right height, which is regulated by the norms:

• The standard height from the floor is 60 cm. This distance from the floor to the top edge of the bath allows you to freely get in and out of the bathing area quite easily.
• The distance of the bath from the walls in the room should be at least 70 cm so that you can freely approach the bathing area and use it for certain needs.
• The standard height of the bath bottom from the floor should be at least 15 cm. This indicator should be stable despite the variety of types of structures.
• This product must be installed evenly, without slopes, because it is provided by the manufacturer himself and is directed to the drain.

To calculate the optimal lifting height of the bathroom, you need to focus on indicators such as:

• Average height of people living in the room. Thus, the height can either drop to 50 cm if the family is not tall and there are many children, or rise to 70 cm if several tall adults live in the apartment.
• Accounting for the category of people living in the apartment: pensioners, people with disabilities, children, which can also significantly affect the installation height indicators.
• Selection of the bathroom itself in depth. If it is relatively deep and equal to 50 cm, then taking into account the rise of 15 cm to install the siphon, the level comes out at 65 cm.
• Dimensions and weight of the bathroom. If the material is cast iron, then the installation should be at least 15 cm from the floor, lighter materials may have slight fluctuations.

Thus, taking into account the characteristics of family members and the bath itself, which will be installed, it is possible to calculate all the necessary indicators for the correct installation of the equipment and its convenient use.

To purchase a good bath, you need to pay attention to the main indicators of a quality product. Usually, taking bath procedures involves a comfortable position in the bath for a period of time.For the process to be pleasant, the necessary selection criterion should be the ability of the material to keep heat from water for as long as possible. Another criterion for choosing a product will be the service life, because few people want to purchase new plumbing every couple of years.

Of course, a good product will cost several times more than a simple one, but in the end it pays off completely, and the comfort and convenience of its use cannot be compared with cheap options.

If you choose a product by material, then there are the following types:

• steel baths;
• cast iron;
• acrylic.

Each of the options has its own advantages and disadvantages. The most popular is now the acrylic bathtub. It is lightweight, has an attractive appearance, but it needs care, if not observed, it will quickly lose its appearance and it will not be so comfortable to use it. Due to its low weight, such a bathtub is installed on legs or supports, which are included in the kit or purchased individually.

Steel structures have a lower cost, but they are much inferior in terms of heat transfer characteristics, since they cool down very quickly. But in terms of installation, working with it is as easy as with acrylic. Cast-iron options in this aspect represent a much more difficult situation when you have to work with a lot of weight, which does not always withstand standard legs, therefore, in this case, an additional frame is often built, which also requires extra investments.

When planning the choice of a bath, it is worth deciding first of all on its size, because it plays an important role in optimizing the space of the room. The bathtub should easily enter the room and take up the space allocated for it, while leaving space for the storage system, and maybe for the washing machine. The standard size is considered to be 180 by 80 cm, but often the dimensions of shower rooms do not allow accommodating a full-length structure.

Based on the requirements of the premises, manufacturers began to produce smaller designs of bathtubs, ranging from the smallest, where the bathtub length is 120, and the width can vary: 70/75/80, and ending with a full-size version. The most popular size for apartments is considered to be 170x70, where it is supposed to allocate more space in the room due to the size of the bathroom. If the room is very small and it is difficult to place something large in it, then the 150x70 product will perfectly fit into the interior and will give you the opportunity to take bath procedures, relax and unwind even in such cramped conditions.

Having decided on the size of the bath, be it a full-length one of 180, an average of 170 or a small 150 cm, you need to start choosing the material from which the container for water procedures will be made. It is important to understand that if a metal bathing container is bought, then it can be installed both on the legs and make a podium. Low options that come with legs initially do not have to be installed, you can choose any others so that the structure is stronger and more reliable. Not all products are initially equipped with legs, therefore it is possible to choose the type of installation based on the material of the bathroom and the tasks that the space under it can perform.

The most popular option for bathtubs was once cast-iron products - strong, reliable, well-retaining heat, but too heavy and requiring certain skills to install. Their competitor was a steel bathtub, which is much lighter, which makes it much more convenient to transport and lift it to the floor. The installation of such baths is also quite growth, although there are some nuances. If you install a bathtub on legs, it will be very noisy and will quickly give off heat from the water that has been taken into it. But this nuance can be corrected by closing the space under the bathroom with foam, mineral wool or polyurethane foam, and closing it all with additional walls.

The advantage of the steel bath is the versatility of this product. Some options may have handles for ease of use, a built-in hydromassage system that allows you to fully relax. The coating of such bathtubs can be different - it is enamel and polymer coating, which is used more often. But the most popular today is the acrylic bathtub. It is very lightweight, does not present any problems in installation, and with proper care it can last up to ten years.

A new type of bath material is kvaril, which is a mixture of acrylic and quartz. Such products withstand heavy loads, are not afraid of shocks, do not create noise during use, and keep the water temperature well. By weight, these bathtubs are heavier than acrylic, but lighter than cast iron. Most of the products are equipped with the functions of hydromassage, air massage, armrests and headrests for ease of use.

It is especially worth highlighting ceramic baths, which are of high cost, so not everyone can afford them. Such products perfectly and for a long time keep heat from water, are absolutely not noisy, do not rust, they are not afraid of mechanical damage. They also have a long service life, but they are very inconvenient to transport due to their heavy weight and the risk of breaking an exclusive product. Ceramic products of this type can be made from both natural stone, such as marble, and artificial.

The use of various materials to create a bath did not become the limit, and very soon, in addition to simple rectangular designs, new, more interesting and unconventional ones began to appear. An ordinary bath can only differ in size from a small one, in which you can take water procedures in a sitting position, to a full-size one, where there is a place to lie down and fully relax. A new word in the design of such products was the appearance of corner structures. They seem very large, but in fact, it is this option that helps to properly distribute the bathroom space and fill it with everything you need.

If we consider the angular configuration in more detail, then it is worth highlighting its options:

• right-handed and left-handed designs;
• symmetrical and asymmetrical.

The main material for them is acrylic or steel, but artificial stone can also be used. The functional component of these structures is wider than that of simple bathtubs, because it has a built-in hydromassage and, if necessary, is completed with other useful functions. Symmetrical products can measure 120 by 120 and reach dimensions of 180 by 180 cm, and asymmetric ones vary from 120 by 60 to 190 by 170. The choice of size depends on the dimensions of the bathroom.

In addition to this option, there are also oval designs that look graceful and have soft and pleasant outlines. In addition to visual beauty, this option is very convenient to use and allows you to fully relax. For a more complete effect, hydro and air massage is often built in, but not equipped with armrests and headrests. The sizes of such baths can be very diverse, but the most standard is 210 by 140 cm.

The appearance of new, more rounded shapes gave impetus to the emergence of an even more perfect design in the form of a round bath. This option is suitable for use by two or more people at the same time, depending on the size and configuration. It is in this case that the presence of hydromassage functions gives the maximum result, allowing you to truly relax.

The diameter of this type of bathtub can start from 140 cm and go up to 210 cm. Most often, acrylic is the material for the manufacture, but sometimes you can also find steel structures. To obtain an exclusive product, you can order a bathtub made of quaril, natural or artificial stone. The variety of shapes and sizes is striking, therefore it is necessary to soberly assess the needs, which will allow not to make a mistake and buy exactly what is needed for the specific conditions and people who will use the bathroom.

When buying a bathtub, the first thing to think about is its installation in a designated room. The choice of installation option will depend on a number of factors - this is the material of the bath, its dimensions and the design features of the room itself.

There are three main options for installation types.

• Using a frame to install a bath in it. This option is best suited for acrylic and steel bathtubs, which can deform under heavy loads. The frame makes it possible to choose the optimal height of the product relative to the floor, reliably fixes the structure, creating the most comfortable conditions for taking water procedures.
• Installing the bathtub on legs. Most often this option is used for cast iron and steel products. The legs can be height-adjustable and solid, monolithic. The structure, placed on legs, does not exceed 20 cm in height from the floor.
• Installing the bath on the podium. This option makes it possible to protect the product from deformations of any plan, helps to make the entire structure more stable. If bricks or blocks are used as the material for the podium, then the height of the finished structure can be any. In addition, this option allows you to minimize heat loss even in the coldest baths.

The bathroom should be a place where any family member can take a shower or lie in the bathtub and relax, and for this it is important to create all the conditions. The height of the bathtub should not be inconvenient or difficult for any family member to get in or out of.

It is important to choose the installation option for the bath initially in order to purchase everything you need. This is especially important in the case of cast iron structures, which are heavy, because it is very difficult to work with them. Often, such products are equipped with ready-made legs that cannot be adjusted in any way, you can only use improvised materials that level the floor area to the desired level so that the structure is stable and even.

Acrylic and steel bathtubs do not have such a large mass, therefore it is easier to work with them. In these cases, you can use the legs with the ability to adjust the height of the product. Having correctly aligned all sides and choosing the optimal height for taking a bath, after the installation is completed, you can proceed to approbation of the new design.

If the floors in the bathroom are very uneven, then they must be leveled before installing new plumbing. It is advisable not to overstate the level too much so that it is not higher than the corridor, otherwise any moisture will immediately flow into it.In this case, curbs are built that impede this process, however, the floor height in both rooms should be approximately equal.

When installing the bath, it is important to set it clearly horizontally, for which a level is used, which is used to check the side in contact with the wall. The side and wall angle should be 90 degrees.

The height of the bathtub from the floor depends on the type of installation, the main thing is not to make the landing lower than 15 cm, which will complicate the installation of the siphon. When choosing legs for the finished product, it is worth considering the interior of the room, which will help you make the right choice.

If a child lives in the apartment, then for the convenience of using the bathroom, you can find special furniturewhere there is a step that makes it possible to reach the mirror and the tap. The advantage of such a protrusion is that it can be pulled out when needed, and hidden when it is no longer needed. If there is no room in the bathroom to install additional bedside tables, then you can make an additional small washbasin to the sink, which is located near the bathing tank, and place it at the optimal height for the child.

See below for more details.