Corner bathtub in the bathroom interior

A bath is not only a place for performing hygiene procedures, but also an opportunity to relax and unwind after a working day. Of course, most people dream of a large bathtub in which you can stretch out to their full height, even better - a bowl equipped with a shower, hydromassage and comfortable recesses and stands that repeat the anatomical features of the body. But the size of the bathrooms in most apartments does not allow to accommodate such a device due to its small size.

The solution may be to install a corner bowl. It will free up the useful space of the room, visually make it more spacious, while the bowl itself is quite spacious. If desired, it can be equipped with a shower cabin, hydromassage nozzles.

The main feature that a corner bathtub has is its placement option. It is installed in a corner, along the line of two intersecting walls. This determines the shape of the device - more often it is made in the form of a triangle, a quarter of a circle, or has an asymmetric shape.

Due to the peculiarities of the shape, such a bath takes up less space in the room, being considered more ergonomic. It can be quite large and have an average of 1.5 m on each side between the corner. In such a bathroom, procedures can be taken lying down, for convenience they are equipped with a seat, armrests, a headrest. With more modest parameters of the room, it is worth choosing a smaller bathroom, in this case, sedentary devices are obtained.

Equipping the structure with a glass or any other curtain, you can organize a built-in shower. You can use the shower just like in the shower, if you attach a special panel with a stationary and removable shower head and hydromassage nozzles.

If there are nozzles in the corner model and a system that allows water to circulate throughout the system, a full-fledged jacuzzi is obtained. In such a device, you can not only relax, but also get a session of useful hydromassage, which improves blood circulation and metabolic processes in the body, improves skin tone.

The undeniable advantage of the corner design is its ergonomics. The compact bathtub fits into small rooms, including the bathroom in the "Khrushchev". This leaves more usable space than with standard models.

Another plus of the devices is their large capacity. These baths are usually deep and spacious. A standard corner-type bowl is considered two-seater, since two people can take a bath at the same time without interfering with each other.

Ease of installation is another positive quality of the device. Its installation does not differ from the installation of a standard bathtub. The main thing is to take into account the supply points of the water supply pipes and the drainage point when installing the corner bath. If you have any difficulties, you can draw a plan of a room with a wiring of communications and an indication of the length of the walls and contact a specialized store. Experts will help you choose the best option.

Corner structures are functional - they can have a jacuzzi, a shower unit can be placed on one of the walls.Such devices usually have a wide side for storing bath accessories. However, you can always use the free surface of the second wall for such shelves. The compactness of the placement makes it easy to manage additional systems, since the control panels for the shower and Jacuzzi can be located on the walls adjacent to the bath.

Finally, corner models allow you to create an original and individual room interior. As you know, small bathrooms often look boring and monotonous. The use of an angular type design allows you to get away from templates - such a bathtub looks attractive in itself, and thanks to the presence of free space, an opportunity opens up for the embodiment of design ideas.

The only downside of the device is the higher cost compared to the standard version. However, according to user reviews, this drawback is leveled immediately after installing the device - it is so comfortable and ergonomic.

It is worth noting that the advantages and disadvantages of a bathroom located in the corner of the room also depend on the material of its manufacture, overall features, and the type of form.

Depending on the bowl material used, corner structures are of the following types:

The most common option due to the successful combination of acceptable quality and affordable price. Such baths are created from liquid acrylic, which is placed under a special press that repeats the shape of the future bath. The result is a durable material with a pleasantly smooth texture. The service life of the bath is about 10 years. An acrylic bathtub retains heat well, heats up quickly, has an attractive appearance, and various shapes. Its disadvantage is its low resistance to mechanical damage, the inability to use abrasive cleaning agents.

Common options are a metal bath made of steel and cast iron. A cast-iron bathtub is rarely used, due to its heavy weight (the complexity of transportation and installation, may not be suitable for dilapidated houses), low sound insulation properties (when collecting water or working with a shower, it rattles), high cost. In addition, the material is cold and therefore takes time to heat up the surfaces. Due to the peculiarities of production, iron baths cannot boast of a variety of shapes. However, they are resistant to loads and vibrations (which makes them convenient for installing a hydromassage), durable.

Steel baths are lighter than cast iron ones, they also rattle when water is collected. Such a device keeps heat worse, so you have to resort to various installation tricks so that later, when used in the bathroom, the water in it cools down more slowly. Good durability and low price are the reasons why steel baths are still in high demand.

Due to its heavy weight, high price (the average cost starts from 100,000 rubles) and installation difficulties, a natural stone bathtub is used quite rarely, mainly in mansions and country houses. A worthy analogue is a bowl made of artificial stone. It is based on natural marble chips (or from any natural stone), ground into flour, and polyester resins. The composition in liquid form is poured into a special form and removed after solidification. This is how the popular cast marble bathtubs are produced.

The resulting product is 2 times stronger than natural marble, as accurately as possible repeats its color and texture. At the same time, the material is pleasant to the touch, has good indicators of heat and sound insulation, is hygienic and allows you to add notes of luxury and sophistication to the interior.The disadvantages are the large weight and high cost (which, however, are several times less compared to the weight and price of natural stone products), the inability to clean the bath with products containing abrasive particles.

They are rarely used due to low strength indicators. Such a bath can be installed, for example, in the country, provided that it is not used all year round. Among the advantages are low weight, low cost, variety of shapes and colors.

Depending on the shape, corner baths are of the following types:

The length of the sides of the bath along the walls is the same, they are more spacious, but also more bulky, require a lot of water.

The lengths of the sides of the structure are different, which in most cases does not affect its spaciousness and functionality. Such a bath remains a bathroom for two with the possibility of installing additional equipment.

The shape of the bathtub is usually dictated not so much by the personal preferences of its owner as by the size of the bathroom. A large room allows you to easily place a symmetrical structure, while in small rooms it is more rational to choose an asymmetric version that literally "fits" into the available space.

Among the most common ergonomic options are triangular and trapezoidal bathtubs. The first ones can have a rounded side part, trapezoidal ones - a beveled or right angle. The latter are usually more roomy.

Asymmetrical bowls are divided into:

• left-sided (the left side of such baths is defined for communications, connection of water supply and sewerage systems);
• right-handed (for communications, the right side is provided here).

Depending on the availability of additional equipment, corner baths can be:

Corner construction of any shape and size, equipped with hydromassage jets. The latter are installed in different parts of the bowl, usually along massage lines. A water or water-air jet is supplied from them, which provides massage. If desired, the bath can be used exclusively for hygiene purposes or include a jacuzzi, turning a regular wash into a spa procedure.

If desired, a combined shower cabin can be organized. It will be a full-fledged box with side panels and a dome, equipped with shower heads and other options. In this case, the bath serves as a shower tray. However, due to the cumbersomeness of this design, it is quite rare. A much more common option is to use a shower panel that is attached to one of the walls. Most models have a stationary (highly fixed) and hand-held (removable shower on a flexible wire) shower, as well as hydromassage jets. More expensive models offer several modes of operation of the shower and nozzles, which significantly increases the comfort of the device. A special curtain allows you to protect the rest of the room from water penetration. By the way, it will also be needed in the case of a combined bathroom.

More "advanced" models include an air massage system (massage with air bubbles), chromotherapy (illumination of water structures with various colors), aromatherapy, water purification function, bath lighting.

An integral part of most corner bowls (especially if they have a shower or are placed in a combined bathroom) are curtains. In this regard, the following types of baths are distinguished:

Outwardly, they resemble a small glass door. The basis of the structure is specially hardened glass. It has increased strength, resistance to mechanical stress, does not disintegrate on impact, but remains on a special substrate.It is safe and comfortable to wash behind such glass, and the transparent base and reflectivity allow you to visually increase the space.

They look very attractive, but they get wet quickly. That is why fabric curtains in their pure form are almost never found, their analogue is polyethylene. They have an affordable cost, good moisture-repellent performance, and a variety of designs. However, they do not last long, and after a while dirt accumulates on their surface, mold appears.

A durable accessory for more than one year, which is durable and easy to use. Vinyl curtains are easy to wash by hand or in a typewriter, do not let moisture through. The variety of colors and design options allows you to choose curtains for any interior.

Finally, corner baths can vary in color. The classic white device was replaced by black, colored, painted versions. The differences also apply to the design of the structure. The variety presented on the market today allows you to find a bath for a specific interior style.

One of the ways to visually increase the space is to purchase a corner bathtub with legs. - another type of design. Such a device brings notes of luxury and aristocracy to the interior, but under such a bathroom all the plumbing elements and connections are visible. You will either have to leave everything "as is" or purchase an additional screen.

Determining the size of the room, you should clarify the dimensions of the room. After installing the bath, access to all sides of the room should be accessible. Ideally, the size of the corner bath should be such that it is comfortable for the largest member of the family to sit in a reclining position.

The most popular models are triangle-shaped corner baths with sides of 150x150 cm. However, for very small rooms, manufacturers offer a similar option with smaller parameters 100x100 cm. As for asymmetric models, the "running" dimensions here are 160x100 cm and 150x100 cm. It is believed that the size of the smallest corner structure is 120x120 cm. However, for most Western brands, the minimum size is 130x130 or 135x135 cm.

Corner bowls are usually divided into groups depending on their size.

1. Small. Their dimensions do not exceed 140x140 cm, and are intended for one person to take a bath in a half-sitting position. For asymmetric models, the dimensions of a small bath are often 140x90 cm.
2. Average. They have dimensions of at least 160x160 cm for corner models and possible dimensions of 160x100, 160x90 cm. Usually two people can be accommodated in such a font.
3. Big ones. The size of such fonts starts from 170x170 cm for triangular and 170x90, 170x100, 170x110 cm for asymmetric models.

When installing shower boxes on a bath, it is sometimes very difficult to draw a line between these devices. Is the bowl a small bathtub or is it just a deep shower tray with an increased area? These bowls include tanks, the dimensions of which are 90x90 or 110x110 cm.

Basically, all manufacturers indicate overall dimensions in cm (for example, 140x140 cm), however, the indication of dimensions in mm is not a violation (accordingly, 1400x1400 mm will appear in the accompanying documentation).

For the sanitary room in the "Khrushchev" bathtubs are usually suitable, the sides of which do not exceed 160 and 80 cm. Perhaps a bowl of 150x90 cm will fit. cm.

Often, the owners of a small bathroom and toilet combine them, thereby increasing the area of ​​the bathroom. In this case, it makes sense to purchase a more capacious bowl, the dimensions of which are 140x120 or 150x120 cm. In order to save space, it is recommended to select a wall-mounted sink and toilet.

The recognized leader in the world of plumbing is a Spanish company Roca... The product range includes acrylic, cast iron and stone corner models. Impeccable quality, stylish ergonomic design, the presence of many additional functions, equipping the bowl with special armrests and seats - this is what makes the brand's products so popular. A wide price range is also an advantage. Depending on the type and configuration, the cost of the models varies from 20,000 to 120,000 rubles.

Acrylic baths from a Czech brand are very popular in the domestic market. Ravak... They are distinguished by high strength and durability, since the Ravak company uses only acrylic sheets, as well as a unique heating technology. The brand's products are quite expensive, but in any case, their price is lower than the cost of similar Italian and German bowls. The price range is 20,000-400,000 rubles. As a rule, the catalogs indicate the cost of the basic device, all components are purchased separately, which increases the already considerable price of the baths.

If you are looking for an inexpensive acrylic bathtub, pay attention to the products of the Polish company Cersanit... These are some of the most affordable models. But, unfortunately, the low cost is achieved by adding additives to acrylic, which significantly affects the durability of the bowls. The average price is 10,000 - 30,000 rubles, although there are models in the range of 50,000 - 70,000 rubles.

Baths of the brand are considered the leader among the most environmentally friendly products. Kaldewei (Germany). According to the manufacturer, all products are made from environmentally friendly materials and are 100% recyclable. In addition, their corner baths are an excellent example of renowned German quality. Another advantage is the variety of colors and designs on offer.

Relatively recently, an Austrian brand appeared on the market Alpen... However, it has already gained popularity among buyers. All thanks to the manufacture of bathtubs from sheet acrylic, impeccable quality of workmanship and affordable price.

Russian manufacturers are striving not to yield to their Western counterparts, which is quite good for many firms. For example, companies Tritonwhose products receive positive user reviews. They note the durability and wear resistance of acrylic models, the variety of shapes, the quality of the components of the hydromassage system, and the affordable cost (10,000 - 100,000 rubles). The downside is the presence of fairly thin walls in cheaper models.

Another domestic manufacturer that deserves attention is Bas... Its products are practical, high quality and inexpensive. However, you should buy products of the middle and premium class. They have a comfortable shape, anti-slip and antibacterial coating. Cheaper models in some cases are characterized by an ill-conceived bowl shape, the presence of a characteristic odor that exudes the reinforcing layer of the bath. The average price is from 10,000 to 50,000 rubles. The Laguna model (dimensions - 170x110 cm, on a metal frame and legs) has earned consumer confidence.

Products of the brand are distinguished by price availability. "Radomir"... A feature of the product is the use of 100% Austrian cast acrylic for its manufacture, as well as a bath wall thickness of at least 5 mm. This ensures the strength and durability of the product. Most models are equipped with an anti-slip embossed coating to ensure the safety of the bowl. However, some users claim that lying in such a bath is not as comfortable as in an analogue with a flawlessly smooth coating.

Another brand from Russia that has won the trust of consumers is Aquanet... One of his most famous models is Cooper, has a convenient size - 160x100 cm, is right-sided, equipped with an anti-slip coating and a wide stand.This universal bowl costs only 13,000 - 15,000 rubles. It combines functional simplicity and low cost.

When choosing an angular model, give preference to models with rounded corners, they are non-traumatic. The depth of the bath is considered optimal if it is 50-60 cm. Children can bathe in such a bath, it is also comfortable for an adult.

When choosing acrylic bathtubs, give preference to a solid sheet material, rather than extruded counterparts. The former are more expensive, but they are more durable, of high quality, and retain an attractive appearance throughout the entire service life. Composition - 100% injection molded acrylic.

In acrylic bathtubs, the most important thing is sufficient thickness to ensure the strength of the structure. You can check the thickness using a pocket flashlight. Direct a beam of light onto one of the sides of the tub. If it manifests itself on the other hand, you should not buy a bath.

Click on the bottom of the tub. Real acrylic won't play. The appearance of vibrations is a sign of insufficient reinforcement of the device or an attempt to pass the plastic off as acrylic. Tap the surface - the sound should be equally muffled over the entire area of ​​the bath.

When purchasing a cast marble bathtub, evaluate its surface. There should be no pores or cracks on it. Pay attention to the composition - the content of marble chips must be at least 80%. This is the only way to achieve the strength of the product.

Companies from Italy and Germany are considered the leading manufacturers of corner baths. For the highest quality products, you will have to pay the corresponding money, plus import costs. Joint production of foreign and domestic companies usually means maintaining high quality and lower cost. Baths of some Russian brands are of decent quality, but have a very meager range in color, shape and design.

Installing a corner bathtub with your own hands will require initial skills in installing bathtubs. First of all, you need to make sure that the walls and ceiling are even, if necessary, align them. Naturally, if you have an old bathtub, it should be dismantled first.

All work is carried out with the water supply turned off. At the stage of preparation for installation, drain grates and a place for draining water should be installed, as well as a frame with supporting supports, taking into account the weight load.

After that, you can bring a bath into the room and install it by adjusting the sides exactly along a horizontal line. For this, it is more convenient to use the level. Most asymmetrical models have a slope towards the drain hole. If not provided, the clamps on the legs should be adjusted to achieve the desired position of the bowl.

The structure is fastened at least at 4 points, all joints are coated with a waterproof sealant. Flexible skirting boards must be installed at the points of contact between the sides of the bathroom and the wall. It is recommended to use corrugated pipes to connect the bathtub to the sewage system, since they easily accept the required bend. After connecting to the water supply and sewerage system, it is necessary to fix the legs, after which the installation of the bathroom can be considered complete. It is enough just to make a control set of water, to make sure that the connections are tight and the systems are working properly.

If necessary, the mixer is replaced, which can be mounted on the wall or on the side of the bathroom. Experts recommend installing a cascade built-in mixer for a corner font, since it allows you to quickly fill the bowl with water.

Some models are designed for pedestal installation of the bathtub. Its height can be from 10 to 50 cm. Often the bowl is mounted directly into the niche of the pedestal. Such an installation assumes the presence of a "pedestal" or a pencil case for communications. By opening it, you can easily access the required pipe without having to dismantle the pedestal.

A corner bath is an excellent solution for small ones, including combined bathrooms. With the correct layout, it will be possible to easily place not only plumbing fixtures in the room, but also a small chest of drawers under the sink, washing machine and accessories.

The width of the bathtub should be at least 80-90 cm, the depth - at least 50 cm. A sufficiently large person can fit in such a device, it is convenient to bathe a child in it, and if necessary, you can accommodate a baby bath.

After each use, the bath should be rinsed with water and wiped dry. For cleaning, it is better to use products intended for a particular surface (acrylic, cast iron, etc.). Acrylic and stone baths must not be cleaned using abrasive products or hard brushes.

Most surfaces will stain with paint. Avoid contact with coloring components on the surface of the bowl. If this does happen, you can try to apply a solvent to the stain and, after waiting a couple of minutes, gently rub the stain with a soft sponge, then rinse with water.

Proper plumbing and the absence of even small puddles on the surface of the font will help prevent the formation of rust stains.

To create a harmonious interior, it is better to purchase a bathtub complete with a sink and select a toilet bowl suitable for the style.

As a rule, the use of a corner bath is resorted to in small rooms, therefore it will be useful to remember other tips that allow you to visually increase the area of ​​\ u200b \ u200bthe room.

1. Choose plumbing fixtures and fittings in light shades. It does not have to be a snow-white sink and a bathtub (although this option also allows you to bring space into the room), the use of pastel, delicate shades is permissible.
2. Use mirrors and reflective surfaces, which also serve to increase the space.
3. Use a multi-level lighting system. This will help to zone the space, achieve intimacy at the time of taking a bath (just turn off the overhead light and turn on the lighting as close to the shower area as possible).

In most cases, a corner bathtub occupies completely one of the walls and partly the second. A sink is placed in the free space of the second wall, preferably a hinged one. Sometimes the sink can go slightly into the space above the bathroom.

If the area of ​​the room allows, then the bath occupies the entire main corner of the room, and the free space is "given" under the sink, toilet (for combined bathrooms), and a washing machine.

The most common styles of corner bath room decoration are:

It assumes the presence of a large area, the bath is snow-white or stone with a natural stone texture, gilded sanitary ware, light tiles, the presence of cozy accessories.

A good option for small rooms, assuming the rejection of a large number of accessories. The severity of lines, simple geometric shapes, an abundance of light, functionality - these are the distinctive features of the style.

Unusual shapes, practical materials are the best solution for creating this style. The emphasis should be on an asymmetrical bathtub, possibly in a color version.

One of the modern styles, which will help to recreate the imitation of stucco on the walls, a white or steel shade corner bath, original lamps and a fluffy rug on the floor.

How to install a corner bath, see the next video.