The subtleties of choosing built-in shower mixers

Modern sanitary ware is compact and efficient, which allows it to be placed in bathrooms of all sizes. Built-in mixers are devices that successfully cope with the tasks assigned to them, while their presence is almost invisible. The installation of built-in mixers and the durability of their operation are associated with several important factors. Consider the nuances of choosing built-in shower mixers.

The built-in shower system is a relatively recent technology. Little is known about it yet, so there is no high demand. This design is inherent in the practicality and rationality of the solution.

The use of a built-in mixer offers significant advantages:

• there are no protruding nodes;
• hoses do not sag;
• the build plate merges with the wall plane.

The system consists of two nodes: one unit is installed in the wall and covered with a decorative panel on top.

The fittings are a spout and a watering can. The cost for some models can exceed a thousand dollars and even more. But this is more often the exception than the rule. For standard models, the price is quite affordable. The device is practical and is now in fashion in the West.

It is inherent in:

• ease of installation;
• simple functionality;
• reliability.

The main functioning unit is the base unit, which is responsible for the intensity of the flow of water.

Consists of the following elements:

• durable plastic cup;
• brass head with four threaded holes.

The latter directly control the mixing of hot and cold water. The mechanism is made in such a way that it can work for a long time without breakdowns. It is simple, does not have complex details, and the number of nodes is minimal. Preventive maintenance of the mixer usually comes down to replacing the gaskets.

It is important to know the quality of the materials from which the mixer is made. For example, the most unreliable are products made of silumin (powdered aluminum alloy). The prices for such products are not high, although it is not recommended to buy them (it will be wasted money). Such a thing, after a short time, will become unusable without the possibility of restoration. The situation is better with brass structures, which are slightly more expensive, but have higher strength.

A good product is characterized by the coating material, the most common are:

• chromium;
• bronze;
• gilding.

It is necessary to pay attention to the functionality of the product. People often buy devices that are used at 30-40% of the potential that they contain. The conclusion suggests itself unambiguous: there is no point in overpaying for an expensive model, which is planned to be used only by half. It is wiser to purchase a unit that will meet the needs as much as possible, while at the same time it will cost less.

Before installing the device, you must invite a specialist with experience to look at the room and give valuable practical advice. It is not always possible to mount embedded systems without any difficulties. Sometimes this requires a fair amount of effort and significant material costs. The shower complex has its own capabilities.

This applies to bathrooms where there is no bidet, only a toilet. Intimate hygiene can only be carried out with the help of such a shower. Such devices work flawlessly, have compact dimensions.

The wall-mounted arrangement of the watering can is in noticeable demand.

It can be used in two versions at the same time:

• use of a separate compartment;
• shower for the bathroom.

The wall-mounted arrangement of the watering can makes it possible to transform it closer to the ceiling, which meets the traditional conservative requirements. The original solution is the so-called "shower in the tropics". Its essence lies in the fact that water comes from a large panel built into the wall or ceiling. The jets of water resemble rainfall in the tropics during the monsoon. Often, such appliances in the bathroom are additionally illuminated, which gives the device a more attractive appearance.

Types of mixers with no spout:

• single-lever (it has a shower, holder);
• the lever in the mixer is located vertically;
• the lever is horizontal.

The upright faucet is ideal for small bathrooms. A faucet installed in the wall is aesthetically more attractive. It does not have a spout, therefore it is popular with buyers. When purchasing such a thing, it is recommended to ask for a certificate confirming the quality of the product.

A closed faucet is used in small bathrooms. At the same time, space is noticeably saved, while at the same time a pleasant appearance is created. The advantage of a hidden shower is that it can be installed, for example, in the side of a bathroom. It is not a shame to put this type of shower in an expensive hotel room, small apartment.

Installing wall structures is a more complex and multidisciplinary task, but the positive effect will not be long in coming.

The work can be divided into two phases:

• wiring communications;
• setting up devices.

The work starts from the wall slitting, then the necessary communications are carried out and connected, which lead to the upper ceiling crane. It is important to correctly install the eyeliner, which is responsible for temperature regulation. Slitting is a time-consuming process associated with the generation of large amounts of dust and small fragments of concrete and plaster.

The following tools are required:

• puncher;
• Bulgarian;

• electric drill;
• hammer;
• chisel.

The work is traumatic, therefore protective measures should be taken.

You will need:

• glasses;
• gloves;
• good respirator.

The installation technology is simple, it can be done by any man who at least once in his life held a hammer in his hands. If there is no such work experience, then it is recommended to invite experienced professionals. The installation of each structure has its own nuances, in this case, the installation of the wall panel implies that the mixer and the watering can are located in different blocks. There should be eyeliner between them.

Laying pipelines, installing plumbing is a fundamentally important matter, its significance is difficult to underestimate. The joints must be in good condition: the pipes will be in the walls for a long time, if there is a malfunction, everything will have to be done again. The number of connections depends on the reliability of the entire system.

Pipes for connection are used from metal-plastic or copper. All contacts are secured with durable fittings. It is not recommended to buy cheap knots of dubious origin. A defective fitting is a major source of accidents and leaks.

It is not at all necessary to gouge the walls. In many cases, it is more rational to place communications in a moisture-resistant drywall box. This method looks more rational, economically less expensive.

Products from dozens of different manufacturers are presented on the modern market, an overview of which can take several pages. The reviews are positive for the products of many companies. The leaders include the company Grohe... This company was founded in 1935 in Germany, mainly producing sanitary ware. The company is known for presenting original innovative developments to the world every year. She has been producing sets of built-in sanitary ware for 24 years, has a unique design center that comes up with all new product models.

Firm Hansgrohe has been around for over a century. The structure is famous for its original models and their impeccable quality. The company is a trendsetter for manufacturers throughout the industry. The products combine exquisite design and superior quality, and all products are covered by long warranty periods.

Mixers of the Czech brand Lemark appeared in the post-Soviet space relatively recently. The products are mainly of the economy segment, production facilities are located in the city of Brno. However, the assortment includes expensive top-class models.

There is a set of models specifically for kitchens, showers, bidets, washbasins. The pride of the manufacturer are branded crane axle boxes and ceramic cartridges. The presence of special plastic pads protects your hands from burns due to high temperatures.

The mixer can be installed independently (the process does not require much skill). To do this, it is enough to carefully read the instructions that are attached to each unit of the product. The parameters of the strobes are usually 14 cm wide, up to 10 cm deep. To start work, you need to know exactly where the watering can will be. Using a marker, mark a line to the indentations in the wall. Then a recess is made along this markup.

Then, from the installation site of the main unit, draw another line with a marker to the main watercourse. Pipes are placed in the existing recess. You should also make spouts for the mixer and watering can. At the end of the pipeline, threads are mounted, which are fixed in the plane of the wall. All knots must be fixed with tow and paint.

When installing a built-in mixer, certain conditions must be observed:

• When installing a built-in mixer, a major recess is made in the wall.
• In this case, communications should not intersect.
• It is better to work with a perforator with a concrete nozzle.

You can find out how to install a shower faucet with your own hands from the video below.