Bathroom faucet installation process

If you decide for any reason to change the faucet in the bathroom, there are two options for solving this issue: call a qualified specialist who will do everything quickly, but you will have to pay for his services, or get down to business on your own. If you choose the second option, then this article is for you.

Nowadays, the mixer performs not only the function of supplying water, but also is an element of decor. It should harmoniously fit into the interior of the bathroom, be compact and beautiful. Modern manufacturers of plumbing provide us with a huge selection in different price categories, but still it is worth taking into account a few useful tips from experts.

It is impractical to install one mixer for a bath, a sink and a shower, it will quickly become unusable. Check the complete set very carefully: it should have manual flexible adjustment and a holder for fixing. Spouts are very often not provided in many mixer models, and this is a small, but a minus.

The most common type of mixer installation is wall mounting. Such installation is carried out with a permissible wiring of pipes for the water supply. It is imperative to adhere to the standards - the mixer is mounted at a height of 1.2 meters from the floor, the distance between the water sockets is 15 centimeters. You must take this work very seriously, since the smooth operation of your mixer depends on the correct execution of it.

The next option is to mount it on the side of the bath. The plus here is that all parts will be hidden behind the body of the bath, and during installation they use flexible hoses, which gives you the ability to mount them in any place convenient and convenient for you. But there is also a small drawback. There is no place for installing a mixer on the old-style bathrooms, therefore this method is used in most cases for new generation acrylic baths.

The last type of installation is floor installation. This is the most expensive method, it is not suitable for small bathrooms, and it will be difficult to produce it yourself if you are not a plumber.

One of the most important characteristics of a mixer is its appearance in terms of functionality and the material from which it is made.

There are four types of mixers:

• double-lever (two-valve);
• single-lever (single-grip);
• cascading;
• thermostatic;
• sensory.

Two-valve are the most common type of mixer. Two elements are responsible for the supply and regulation of water (both hot and cold) - valves and levers. You manually bring the water to the temperature you want. There is a mesh on the faucet spout, the function of which is to reduce the splashing of water droplets. Please note that when installing two-valve mixers, you must remember to leave a gap between the pipes, which should be 15 cm, and use eccentrics.

Mixers of this type have two small drawbacks. Firstly, it takes time to adjust the required water temperature, and secondly, the sealing gasket wears out very quickly, so such mixers have to be repaired several times.

The analogue of a two-valve mixer is a two-lever mixer. The water is regulated by turning the handle 90 and 180 degrees and instead of a rubber gasket, these faucets are equipped with ceramic plates that prevent quick wear. But at present, the demand for these two types of mixers has dropped significantly, because more advanced models have begun to be produced.

Single-grip (single-lever) mixers are currently in the highest demand on the market. It is much more convenient to use them in comparison with the previous ones - with one handle you control the water, and its temperature, and the force of pressure. It also saves you time. There are two types of single-lever mixers: with a lever with a joystick. When installing them, eccentrics and gaskets are needed. They are good in that they save, filter, purify water.

The main part of the mixer is a lever that is attached to a fixing screw. Also included is a cartridge. It is he who is most susceptible to breakdowns, but it is not difficult to replace it yourself. This type of mixer has the following design: control handle, connection fitting, non-return valve and shower hose. All these parts are very easy to remove and replace in case of breakage.

Cascade mixers are so named because of the very fast spout and the visual effect of the waterfall. Some models have a hydromassage function.

Thermostatic mixers are a smart model. You program all the parameters convenient for you and they remain unchanged during further use. This model is good in that it protects against unstable operation of the water supply system.

Touch faucets are the latest and most convenient model. The water turns on itself when you approach your hands, and turns off as soon as you stop washing them. A big plus of these mixers is economy.

As for the materials for the manufacture of mixers, in vain, many believe that this is not such an important issue. It is worth remembering the three main factors to consider when choosing a faucet in a store - strength, corrosion resistance and environmental friendliness.

Silumin is the most short-lived and quickly deteriorating material from which relatively cheap models of the built-in mixer for the sink are made. Despite their weight advantages, their lifespan is very short and they tend to break down very quickly. It is better to give preference to brass models - such mixers will serve you much longer. Never buy faucets (or any other plumbing fixtures) that are nickel-plated, as this alloy has long been proven to have a negative impact on health. It is always best to choose a model that is coated with chrome.

For a built-in hidden single-lever stainless steel mixer, it is advisable to choose a vertical eyeliner.

So, you have selected the model you need, now you can get to work. Any of the models, regardless of price and quality, must be accompanied by instructions with an installation diagram. After carefully studying it, you can independently connect the mixer. It should already be assembled, so you just have to check the seal in the spout, the fit of the oil seals, the operation of the valve head, inspect the gaskets and seals, the valve turns.

Next, unpack all the boxes and packages that come with the kit. There is a standard set: gaskets, nuts, eccentrics, wall reflectors, bushings, a faucet spout and a shower head. All this you will need to connect to the tap.

Strict adherence to the instructions will not create any problems. But do not forget about the standards: the installation height must be at least 1 meter from the floor.

Install the water sockets in the appropriate places, when removing the fittings, calculate the distance between the pipes with water - it should be 15 cm. It is very important that the fittings are mounted strictly horizontally to each other and are not too long.Having finished with the conclusions of the fittings, proceed to the main part of the work.

You need to immediately prepare all the necessary tools: the mixer itself and all its components, pliers, building level, tape measure, adjustable wrench, open-end wrenches. Also prepare linseed tow, silicone, sealing tape. You will definitely need a piece of soft cloth, a bucket, wet wipes, and even toilet paper.

An excellent option is tools without teeth, but if they are not, don't be discouraged, just cover the parts with a rag or towel. This will protect them from damage to the coating. Paper is needed in order to wipe everything and check for leaks. And if a leak takes place, you will have to disassemble and reassemble the structure, and this is unlikely to give you pleasure.

Before you start installing a new mixer, you need to get rid of the old one, which may already be loose. This will not be difficult to do. First of all, shut off the water supply, but not only from the main system, but also the flow of boiling water from the boiler or gas water heater. Drain all the water from the tap, unscrew it. This must be done very carefully and carefully, otherwise you can damage the threads on the fittings in the wall. If they are damaged, you will have to break the wall and replace them. Polypropylene pipes from the water supply circle require respect for themselves.

After removing the old tap, you need to be extremely careful to clean the fittings in the wall and remove all remnants of the old winding or paint from there.

It is necessary to screw the gander to the main unit, then turn the hose with a watering can. You do not need to use the keys and tighten the nuts too. Having assembled the model, you can start the installation, which consists of the following steps: wrap the eccentrics with sealing tape, then insert the fittings located in the wall, which remained from the previous tap.

This must be done very carefully. If there is no tape at hand, tow can be a substitute. Next, we screw in the eccentrics, strictly measuring the distance between the inputs on the mixer and using a level. This is done for a reason - the distance should be strictly 15 centimeters. After that, we wind the main block on the eccentrics. This should be done slowly, as it must be secured carefully.

Try not to rush, and if something does not work out, it is better to take a short break and calm down. If the block on both sides is screwed up calmly, then everything can be put correctly. Then the block must be removed and decorative shades must be screwed onto the eccentrics, which must necessarily fit snugly against the wall and close the insertion points of the mixer to the wire. If everything is exactly like that, then your work is done perfectly well. Next, we screw the block back using the reel. In order for the shrinkage to be tight, gaskets from pressure nuts must be used. The nuts need to be tightened with a wrench, but not very tightly.

We open the hot water tap and check how the mixer works. Start the test with a low pressure, gradually increasing the power of the water supply. Be sure to check how the shower works. If everything is in order, then you did it the first time. But if there is a leak, you need to find its source, turn off the water again and repeat all over again. There is a good chance that you have overtightened the nut or some fastener.

You already understood how to install a new mixer instead of a worn-out one, now let's deal with a more difficult task - installing a mixer on a new wall. First, pipes are replaced, the walls are tiled. Further, plumbing pipes are laid out, beacons for plaster are installed. You must calculate the notches in the wall so that they exactly coincide with the distance from the lighthouse to the tiled plane.This is about 17 centimeters.If you are not sure that you can carry out all these work, then it is better to invite a specialist after all, so that later there will be no problems when installing the mixer.

After all the work done, you can start installing the fittings. In order to install them, you need to postpone the distance between the centers of the fittings - 15 centimeters. The centers should be on the same parallel, the end point should protrude beyond the wall, and the fittings should be flush with a suitable height. Once the fittings have been installed, the mixer can be attached. This is done in the same way as in the previous version.

Now let's consider another option for installing the mixer - on a horizontal surface. Such a need arises when installing a mixer on the side of the bath. Before embarking on such an installation, it is imperative to clarify whether the bearing side of the side can withstand the increased load. To mount this type of mixer, you will need a drill with a set of cutters, wrenches and screwdrivers.

At the beginning of the installation, you need to make a markup in order to then strengthen the plates along it. After marking, holes are drilled in the side of the bath. Carefully study the instructions on how to connect the mixer to the pipeline using the connecting hoses and other components included in the kit. Next, we glue the horizontal surface with masking tape to protect the surface from chips and damage, apply the markings and start drilling the holes that are necessary to install the mixer. After the holes are ready, remove it and process the edges with a special tool.

The next step is to collect all the parts and fix them without using keys. If the connecting hoses freely took their places, then everything was done as needed and you can proceed to the final fixing of all parts of the mixer. The next step is to check the mixer for leaks.

The last method of installing the mixer, recognized as the most difficult and expensive, is to install the mixer in the floor. Before any renovation is done in your bathroom, you need to start laying two pipes for cold and hot water. In the floor, recesses are made in the size of the diameter of the pipes, pipes are laid along these recesses to the place where the bathtub will be located. After this, the grooves are closed up, the floor screed is made and the tiles are laid. Then we act according to the technology described above - we mount the mixer, check for leaks, etc.

Before installing a new mixer, you need to decide how many of them will be optimal for you. In the event that your room is small, one is enough for you, but if the room is of impressive size, then several mixers will be appropriate and convenient. If you stop at the second option, then purchase all products from one company. Be sure to take into account the weight of the mixer and the material from which it is made - these are very important characteristics. Good quality faucets are made from brass and bronze, cheaper ones - most often from silumin. Faucets are also produced from ceramics, but these models are made to order.

The second stage is the choice of the installation method. It all depends on your needs and material capabilities. Never rush to install the mixer, approach the work responsibly, otherwise problems may arise. Installing a faucet in the bathtub is not that difficult, and if you do it right, it will last you a long time. Try to choose faucet models that are under warranty service and be sure to check the complete set before buying.

Any thing ever falls into disrepair or breaks down. If your faucet starts to work poorly or breaks down, don't be discouraged. Most likely, it can be repaired, for this you just need to know the mixer device and the reasons for the breakdown.There may be several of them - poor quality of the product, contamination of the water in the pipes, high water hardness, which affects the components of your device. If your mixer is under warranty, be sure to contact the store where you purchased it. You will either have it repaired or replaced with another one.

The installation strip can be made of artificial stone. This is quite popular today, but the price for such a device is significant. It is necessary to take this into account in your estimate.

To make sure your faucet lasts as long as possible, there are a few basic tips to keep in mind. It is better to purchase such things from trusted manufacturers, and not cheap fakes on the market. The difference in price will be significant, but a quality item will also last much longer.

Do not forget that plumbing requires maintenance, which will not seem difficult to you, because modern manufacturers use materials that are easy to clean for their manufacture. No need to use metal "hedgehogs", which will damage the top coat, and products that contain a lot of chlorine. To keep the shine on your faucets for a long time, you need to use neutral products and ordinary soap. And if you cannot remove plaque, then there is a very simple and cheap way - use citric acid, which will deal very well and quickly with plaque and rust. All substances must be applied not to the surface of the mixer, but to a cloth, and calculate the dosage by carefully studying the instructions. Do not leave the products on the surface for a long time, even if the dirt is strong. It is better to repeat the procedure later.

How to install a faucet in the bathroom is described in detail in the video.