Model variants and design of bath mixers with long spout

Bath faucets, which include a long spout in their design, are the type of plumbing that can be classified as classic. They have won their popularity for a very long time. Thanks to modern technology, their appearance has completely changed, and inside their elements have a new design. It is thanks to the long spout that the user has expanded possibilities of use, which cannot but be noted as the main advantage of this choice.

The main distinguishing feature of the device is the presence of a long gander that can be turned. Thanks to this design, the installed mixer can be simultaneously used for both the bathtub and the sink. It is possible to change the place of water intake depending on the needs, which greatly facilitates the operation of the sink and bathtub.

Each mixer model includes in its design a flexible hose and a shower head, which is fixed to the body using special stands. Some models may include mounts that can be installed in the wall or on the bathroom itself. If there is a need to purchase a mixer that will be used for a bathroom and a sink, try to purchase only high-quality models, since a heavy load requires the strength of all elements of the installation.

The most popular and common material used to create a mixer is stainless steel. It is in the first place among other materials, as it has strength, aesthetics and affordability. Faucets made of stainless steel are able to organically fit into any style direction.

Materials such as bronze and brass have a long service life. They are preferred to use if the bathroom is decorated in a classic style or Provence. The cost of such mixers is an order of magnitude higher than those made of stainless steel, but it justifies itself.

You can find products made of ceramics. They have an attractive appearance, in addition, it can be non-standard. Before purchasing this version of the mixer, pay attention to the fact that not only the price is too high, but also fragility, so you need to handle it very carefully.

The whole variety of mixers can be divided into two large types - two-valve and single-lever. Their difference lies in the control system and in the elements that help to mix the water.

Today manufacturers offer the following types of this option:

Such a mixer includes a rubber sleeve or silicone gasket. The positive qualities of such an installation include affordable cost, reliability in operation and the ability, if necessary, to carry out independent repairs. Among the disadvantages, users highlight the fact that to supply water, you have to turn the valve several times, and it takes time to adjust its temperature.

This view includes several plates and holes. One is installed in the body, the other is attached to the rods. The advantages of such a mixer include the fact that it is easy to use, durable, and works silently.Among the disadvantages are the following: overpriced, rapid wear of the mechanism (it depends on the quality of the water). In addition, if his crane breaks, it is almost impossible to repair it, sometimes it is easier to buy a new one.

If choice is a problem, then experts recommend buying the latter type., but in the event that the water quality is at a low level - the first.

More and more consumers are choosing single-lever mixers with long spouts, which are characterized by ease of use.

The following options of this type are presented on the plumbing market:

The name comes from the fact that there is a metal ball with several holes inside the mixer. The advantages of this choice include a long service life and high-quality sealing. As for the shortcomings, one of the main ones is considered excessive sensitivity to calcareous deposits, since they can adversely affect the operation of the device.

Such installations include special plates made of ceramics. They are distinguished by easy handling and long service life. The negative sides include the fact that the cost of such products is high, in addition, the quality of their work depends entirely on water, which should be free of mechanical impurities.

If you consider the best options for both sink and bathroom, then you will certainly be interested in the Oras universal wall-mounted single-lever mixer. This mixer with 40 and 50 cm gander has the best qualities, it is reliable, has a long service life and is beautiful in appearance.

Thermostatic models are a novelty in the plumbing market. Due to the fact that its use is at a high level of comfort, such mixers are becoming more and more popular.

Based on the control method, such mixers are divided into three types:

They include a screen and touch or push-button type controls. Among the advantages of such an installation, the fact that thanks to electronics it is possible to control the water flow is distinguished. As for the disadvantages, such a device is dependent on external electricity.

In this case, the mixer is controlled using special handles. Negative sides in these models are not noticed, they do not depend on electricity and are reliable.

This mixer with a long spout includes an infrared sensor. Experts recognized such models as the most comfortable to use. The user can set the parameters of the pressure and the temperature of the water before switching on. As with previous models, there were no shortcomings, and as for the advantages, the most important thing is safety. Using such a mixer, a person may not be afraid that suddenly too cold or, conversely, hot water will go, the thermostat itself controls this indicator, as well as the flow pressure, changing it in such a way that the user does not even notice it.

Several technologies are used in the production of spouts:

1. Tubular. In order to make such spouts, metal tubes are bent to give the desired shape. Such products are the most popular due to their low cost. In the place where the gander joins, there is a seal - a plastic ring. An aerator is installed at the other end.
2. Soldered.In this case, they create a variety of models that differ not only in appearance, but also in cost. During production, the tubes are not only bent, but also inflated to end up with different diameters. At the end of such products, not only an aerator is installed, but also special nuts.
3. Cast. This technology is of the highest quality and most expensive. The body of the mixer is monolithic, and the weight of the structure is very large, since brass is used for production.

Faucets with a long spout can be installed not only in the bathroom, but also in the kitchen. This will be an especially advantageous solution if the sink is double, in which case a long spout will make it possible to use several containers at once.

Long spouts are considered to be those with a length of more than 25 cm. Such a design can decorate any modern interior, in addition, it is economical, convenient and multifunctional. Among the features of this type, one can also highlight the fact that the faucet on the mixer can supply water in any direction, which is beneficial for sinks, and for baths, and for showers.

Other benefits of a long spout include:

• Convenience in filling any containers. They do not need to be kept suspended when drawing water.
• No problem in carrying out repairs.
• Such structures are designed for double loading.
• Using a spout or shower, you can conveniently wash your baby.

The disadvantage of this choice is that faucets with a long spout have a low tightness rate. In addition, its use will be limited if the sink is located at a great distance from the device.

In order not to make a mistake with the purchase, you need to prepare in advance, and the rules and selection criteria can help in this, the basic of which are presented below:

1. If you have a small bathroom and need a faucet for it, then the first thing to think about is saving space, and only then about aesthetics and functionality. In this case, it is better to give preference to the swivel type of mixer with a long spout. You will be able to serve both the sink and the washbasin at the same time.
2. In the event that the room is large enough, then the previous option is not for you. Here you can provide each plumbing fixture with a mixer.
3. If you only need a bathtub faucet, pay attention to its flow features. The larger the diameter of the spout, the faster the container will fill.
4. For a bathroom, it is better to choose a spout with a length of more than 25 cm. It will not only cope with its direct responsibilities, but also help to cope with other tasks faster. It makes it easier to fill a separate container with water, it is easier to wash your hair. For the sink, it is better to limit yourself to a 24 cm mixer.
5. Do not forget to take into account the general stylistic direction in the bathroom when choosing a mixer. Rectangular chrome models are best installed in modern interiors. If your bathroom interior is classic, then you can give preference to long and curved options with a copper or brass color.

That is, in the buying process, the first thing you need to focus on is quality and ease of use. Only after you understand that the chosen option suits you, you can ask the seller about the availability of other models or colors in order to choose the product you like for the decorated interior in the bathroom.

For information on which mixer to choose, see the next video.