Shower faucets: selection criteria

Most consumers prefer an alternative to the bathtub in the form of a shower stall. This device does not take up as much space as a bathtub, and therefore it is especially important to choose a high-quality and convenient mixer for it. The main task of the mixer is to provide a comfortable water temperature and its economy, which is also important to keep in mind.

This product is extremely compact, has no spout and has a bath-to-shower switch. Thus, hot and cold water is mixed directly into the mixer.

Using the regulator, you can select the desired temperature mode. The difference between such segments is in the methods of installation and is subdivided into external and hidden. The second method involves drowning the mixer into the wall or into a special box. Accordingly, the faucet and shower head will be outside.

You can also choose a modern thermo mixer.

Regulation of water flows and its heating in the mixer can be divided into types:

• Mechanical - these are the simplest of all available options, for the functioning of which only the supply of cold and hot water is necessary, because there is no heating. The presence of three types of management in this form attracts a wide range of buyers. The budget price is the priority when choosing this product. The simplest and most practical is the single-lever type or joystick. Ease of use and repair, as well as the presence of a thermostat in the equipment, which ensures a constant temperature in the tap, distinguishes this type from others. The half-turn valve is no less popular, but rather a retro option, as it is used less often than others.

• Electric mixers Are new generation products. To heat water in the case when there is no autonomous hot water supply, a small heating ten is built in the device itself, the power of which does not exceed five hundred watts. Unlike an electric kettle, this faucet is considered to be very economical. In order to avoid the collection of limescale in the cartridge and shower head, care should be taken to clean them in a timely manner. There are two types of control of such mixers: joystick and touch. With single-lever control, the water pressure is adjusted by lifting the lever up and down, and to change the water temperature, it turns to the right and left.

• Electronic or thermostatic faucets can set the desired water temperature in advance. From the name of the device, it can be assumed that there is a thermostat in the unit of the device, with the help of which, by lightly pressing the hand, the operating modes of the shower change. The functionality of the device is very easy to use, and the aesthetic appearance of the touch panel, all the insides of which are hidden in the shower box, will delight any user. Also, on the basis of electrical control, the entire shower can be equipped with ventilation, a radio and even a telephone. The technology of the present century does not stand still and the cordless electric faucet is one of the most innovative products. The touch panel can be positioned up to ten meters from the shower stall. It is controlled using Bluetooth.

A common material in the manufacture of faucets is brass. Details are enameled or chrome-plated. The quality of these mixers is confirmed by their practicality and durability.

Chrome faucets are quite popular and are widely used because of the ability of this material to repel harmful bacteria, although they are somewhat expensive. Plastic is used to make shower heads and faucet handles.

A ceramic mixer cannot be due to the fragility of the material. Separate parts made of cermet will last a long time if they are fulfilled taking into account all the standards and requirements for the service life of the mixer. Otherwise, the metal may crack and the appearance of the product cannot be tweaked.

The installation or installation of mixers directly depends on their varieties. There are two types - wall-mounted and built-in mixers.

Wall-mounted is the simplest and cheapest. If there is a rack in it, it assumes a complete set of a shower room or a cabin. It is much more convenient to have an overhead shower than a watering can with an eyeliner. The advantage of these mixers is also an open panel and access to devices, and in the event of a malfunction, the possibility of prompt repair.

Such mixers are considered the most reliable and convenient, as they have many advantages. The built-in mixer takes up very little space in the cab. The control modes for water supply are more often a joystick or a ball, and it is very simple and quick to repair such products. A big plus is the management of several spouts at once, regardless of their location.

For example, a cockpit faucet can be operated with a watering can in the kitchen. Of course, such operations are not always advisable, but given all the functionality, this can be considered an additional plus. Also, for comfort, you can position the hydromassage jets, which are used in most shower stalls. One of the disadvantages of this model is the high cost, which is not affordable for everyone.

When choosing a mixer for a shower stall, you need to take into account the place and methods of installation. More recently, one fixture for three appliances was used to regulate the flow of water to a bath, sink or shower. Now it seems possible to use a separate regulator for each case. It is important to remember that the more practicality and functionality the mixer is endowed with, the more expensive and not more affordable it is. When choosing a mixer, it is imperative to pay attention to the quality of the goods being purchased.

When it comes to mechanical mixers, pay attention to the weight of the product. - the heavier it is, the better the material of manufacture. The quality of new generation products depends on the manufacturer.

When buying a thermostatic mixer, it is enough to set the temperature once and then just control the water pressure. Due to the fact that the time for temperature regulation is not used, water consumption is significantly saved, and this is already a solid plus. The disadvantage is the same overpriced model.

When choosing a digital mixer, there are a few things to consider. Undoubtedly, the design of such a mixer is amazing, moreover, its versatility, along with ease of operation, puts this mixer in a row with the best models. Temperature control and water savings add weight to the model and justify its high cost and inaccessibility.

When choosing a mixer for a shower stall, it is important to take into account the regulation of the water pressure and distinguish between their types.

One of the most economical options, installed in the cheapest cab options, is the mixer with one or two positions. One state has a switch to either the shower or the watering can. Two positions facilitate switching from shower to hand shower and vice versa. The presented modification excludes functioning with any delights and is suitable for temporary installation in the country or in the summer.

Mixer with three positions adjusts the switchover between the overhead shower, hydromassage nozzles fixed to the wall of the cabin, and a shower head. It is considered a relatively cheap option, endowed with a sufficient set of functions. It can be distinguished in two types: cartridge and ball. The latter has a ball that has three holes to provide cold, mixed and hot water. When the lever is pressed, pressure is exerted on the ball, which changes its direction, as a result of which the movement of the water flow also changes.

The four-position sample set has added a foot massage function. It is good for relieving fatigue after working days and perfectly relaxes the body. Also included in the massage shower group.

The five positions in the mixer are not always applied and therefore not popular with the consumer. Therefore, in order to determine how many provisions the shower of your dreams should include, you need to think about which functions you cannot do without, so as not to overpay for unnecessary functionality.

You need to know that with a low water pressure, some functions of the mixer will not work. The cost of the product depends on the number of operating modes. The more there are, the more significant the amount spent on them.

The choice of the manufacturer directly affects the quality, functionality and design of the shower mixer. Currently, plumbing is produced by a large number of companies, because the demand for this line of products is huge. Domestic and imported mixers differ in a variety of shapes and designs, and it is easy to get confused when choosing the right option. It is important to understand what kind of product you want to see, and then weigh the pros and cons.

To determine the choice, you need to study the rating of manufacturers, know the types and characteristics of mixers, be able to distinguish a fake from a quality product. The list of producer countries listed below will help you figure out which mixers are the most practical and in demand among buyers all over the world.

Germany ranks first in the production of shower faucets. Ergonomics, as well as the unique design of the models, distinguish them from the products of developers in other countries. Mixers with a set of modes and high reliability serve well and do not lose their characteristics after the expiration of the warranty period. A significant reduction in water consumption when using a mixer is especially important now for consumers.

Thrifty consumers will appreciate Swiss-made mixerswithout begging for their practicality and ergonomics. These models are resistant to damage and operate silently. In the price range, they are not inferior to their competitors and are available to every second family.

Finland with a good reputation in the global market, focuses on quality in the manufacture of its models.Their warranty is much shorter than that of other manufacturers, and is two years. But the service life is determined by 10-12 years, and this is already an excellent indicator. The alloy used in their manufacture includes brass and plastic, and so that the product does not corrode, it is coated with zinc, chromium or nickel.

Price and quality are inseparable when choosing a shower mixer made in Spain. Variations in styles correspond to the shape, design of the product, as well as to its location. Seven years is a serious warranty period for the mixer, given that the main material used for manufacturing is cermet. With proper processing, the material is not inferior in strength even to brass.

Mixers from France are technically perfect, their details are carefully thought out, and the smooth curve of the tap hints at charm and a touch of romance. Connoisseurs of this line of products will be pleasantly surprised by the significant period of their use. The five-year warranty does not, of course, exclude particularly careful handling of the product.

Elite mixer made in Italy with its sophistication and seemingly erroneous fragility, it is in no way inferior in quality to its competitors from Germany and Switzerland. The stylish design will appeal to real esthetes and will be appreciated. The service life is about ten years and the product warranty is offered for up to five years.

A mixer from Bulgaria is not at all afraid of hard water and impurities. Ceramic plates, produced using a special technology, filter particles of lime deposits and do not let rust through. The mixer body is made of a brass alloy combined with a low tin content. The service life is no more than eight years. The anti-corrosion coating consists of chromium and nickel alloys.

Czech Republic, although it closes the rating circle, but not at all inferior in quality to other products. These products can serve for a long time without replacing components. The advantages include adaptation to water hardness, ease of installation. Among the models are single lever with ceramic cartridge, as well as popular thermostatic and sensor models. This mixer will perfectly fit into any room design. The beautiful gloss of the coating provides a dense protective coating that is applied in a thick layer. In addition, these mixers are quite budgetary and among the proposed products you can find one that is suitable in all respects and will not leave anyone indifferent.

When purchasing a mixer with several modes, you need to think carefully whether all modes will be required or only two will still be used. With all this, the price tag of this product is quite large and not everyone will have to afford it. If the pressure of the water supply network leaves much to be desired, then the purchased mixer will not bring satisfaction and will work intermittently. You can fix the mixer yourself, but it is better to call the master, since it is quite problematic to remove it.

Under no circumstances should you buy a mixer handheld or from a random store. Faucets of famous brands are sold only in specialized stores with the provision of relevant documents, a certificate and a warranty card. In this case, it will always be possible to return or exchange the purchased goods.

If the store has its own website, it is useful to go in and get acquainted with the prices, view the characteristics and description of the mixer and the pallet. It is necessary to know for sure all the shortcomings and defects of the goods. It is advisable to be interested in the products of only trusted companies that have established themselves on the market for a long time.

In order not to be mistaken in choosing a model, you need to understand which materials for the manufacture of mixers are of the highest quality and wear-resistant. Faucets made of brass with a ceramic cartridge are long-lived.Silumin products wear out quickly, and ceramics require careful maintenance. Chromium and nickel anti-corrosion coatings are time-tested. The copper plating is not topical due to the dull color and the need for regular cleaning. Gold is a very expensive material, and the enamel coating cracks and chills quickly.

You also need to remember that almost all imported models are not as resistant to water hardness as they say and write about. The percentage of water hardness in different areas differs significantly, and this must be taken into account. If, nevertheless, the choice is stopped on an imported model, you need to purchase an additional water filter, then all expectations will come true.

Before buying, it is imperative to carefully inspect the mixer for defects, chips and various shortcomings on it. You need to check the complete set, see if all the parts are in stock. A product with a guarantee and a quality certificate should look perfect and not cause unnecessary questions. When choosing a cheap model, you need to be prepared for surprises in the form of a sudden breakdown and not always cheap repairs. A high-quality product will serve for a long time and without interruption and will not cause inconvenience.

If, nevertheless, a breakdown occurs, there is no need to despair. There are some guidelines to follow:

• if the shower hose is out of order and leaks in several places, you need to replace the hose line;
• if a leak appears on the valve, replace the rubber gaskets, after which the valve is screwed into place;
• if the half-turn valve is leaking, it is necessary to dismantle the crane-axle box, buy a new one and install it;
• if the lever valve stops working, the ceramic cartridge is removed and replaced with a new one, as the other one may not fit;
• if water flows under the nut, then the broken nut is unscrewed and changed to a new one;
• if the shower head does not function, then it is advisable to replace it with a plastic one with a metal coating. There are various colors for such hoses on sale, and the price for them is quite reasonable.

The decision to purchase always remains with the consumer. Perhaps this article opened the door a little to the hitherto unexplored world of mixer taps for shower cabins.

For a video review of faucets for shower cabins, see below.