Radomir bathtubs: popular models

The Radomir company began its work in 1991 and is the first to start producing hydromassage systems in Russia. For the manufacture of its products, the company uses modern production technologies, strictly adheres to all technical processes, thereby achieving high quality goods.

The company is developing rapidly and does not stop there. Its products have earned a huge number of positive reviews. The range of Radomir bathtubs includes both compact models and luxurious overall tanks. It is worth noting a huge selection of designs and colors, thanks to which everyone can choose the most suitable option for the bathroom interior.

Bathtubs are made of acrylic Is an inorganic adhesive polymer with characteristics very similar to those of rubber. Acrylic is used to make thin sheets that are heated to make the product the desired shape. At the final stage of production, when the mold is completely frozen, the bath is reinforced with glass mat and polyester resin. A metal frame with an anti-corrosion coating must be installed.

Radomir bathtubs have gained immense popularity, according to some characteristics they are not inferior to cast iron ones, and even better to some extent.

The advantages of the products include:

• attractive and stylish design;
• resistance to water with chemical additives;
• good sound insulation;
• excellent thermal insulation - in 60 minutes the water cools down by only a few degrees;

• anti-slip surface;
• wide range of;
• bacteria do not grow on the surface of acrylic;
• small defects on the surface can be corrected with a special polishing paste.

But besides the advantages, like any product, bathtubs also have several disadvantages. Radomir acrylic bathtubs do not withstand mechanical stress. And inexpensive models without a strong frame are prone to losing their original shape. Also, consumers note that the prices for these products are too high, but with proper care and operation, they can last more than 10 years.

Taking into account the architectural features of city apartments and private houses, as well as the tastes and requirements of buyers, Radomir offers a variety of bathrooms in its range.

Most manufacturers offer rectangular baths in various sizes. The range of Radomir includes products with different parameters that can be installed in large bathrooms as well as in small ones. Standard lengths are 120, 140, 150, 160, 170 and 180 cm, but other lengths are also available.

The dimensions of the smallest acrylic bathtub are 120 x 75 cm. You can only swim in such a bowl while sitting. It is suitable for bathing children or adults who are prohibited from strong heat loads.

Products with sizes 170 x 70 and 168 x 70 are the best options for those who like to enjoy a warm bath. Such models are quite long and wide, but at the same time they are compact.

Models such as 170 x 110 and 180 x 80 bathtubs are suitable for bathing tall people. But structures with such parameters can only be installed in modern buildings, where the bathroom area is large.

In addition to the traditional shapes of bathtubs, unusual products are also available to the consumer - asymmetric, angular and oval.

Models that have different sides in length and width. The body can be rounded, beveled or tapered at an angle. Thanks to its original shape, such a bathtub allows you to create a stylish and unusual interior. The design allows you to save space in the room, hide all defects and divide the room into zones. Installation requires a special decorative panel.

Options where the two sides join at a 90 degree angle. They are installed at the junction of the walls, they can also be embedded. The outer side of the font is rounded. It is recommended to choose such models for small square-shaped rooms. Due to the wide corner baths, washing them is inconvenient.

They are distinguished by smooth lines and streamlined shapes. Fits perfectly into any interior. They can be installed both against the wall and in the middle of the room, built into a podium or floor.

The range of the Radomir company never ceases to amaze consumers. The most popular are models Irma and Vanessa, which are compact, but spacious. It is convenient for both children and adults to swim in them. Such models cost about 25 thousand rubles without hydromassage, they can be equipped with a curtain and a decorated screen.

Classic bath "Laredo" is characterized by stability and long service life. The inner bowl is made in a traditional streamlined rectangular design. It is also worth noting the compactness and convenience. There is also a bathtub in the range of the company designed for corner installation - Orsini.

Among the popular models, bathtubs are also worth noting. "Sofia", "Modern", "Agatha", "Amelia", "Sylvia", "Magie"... All products have different sizes and prices, buyers can choose the complete set on their own, according to their requirements and wishes.

Acrylic bathtubs "Charlie" ideal for bathing pets, the company cares about the cleanliness of not only people, but also animals.

With a wide range of models, it is quite difficult for buyers to quickly navigate and choose the most suitable one. In order not to be mistaken in your choice, you must take into account the recommendations of experts.

• The side cut should have two layers - acrylic sheet and reinforcement. The service life of such a hot tub exceeds 10 years. One layer indicates that the tub is made of cheap plastic. If the cut has three layers - plastic, acrylic and reinforcement - this means that a small amount of acrylic was used in the production, that is, the quality of such a bath is low.
• The walls should have the maximum thickness - it is easy to check the thickness, you need to knock on the wall, the sound should be dull. But keep in mind that the acrylic is much thicker on the side cut than on the sides of the tub.
• The bathtub should not have many bends - carefully inspect the product, check that there are no areas where water can stagnate.

• The surface of the product should be perfectly smooth and shiny. In inexpensive models, the surface may have roughness and unevenness.
• For small rooms, it is worth choosing rectangular models; for medium-sized rooms, corner baths are suitable.
• When choosing a bath, be sure to read the reviews about the model you are interested in. If most of them are negative, it is better to look at another option.

The service life of the bath depends on the correct installation of the bath. When installing plumbing, it is important to follow the correct procedure, including the assembly of the structure and the preparation of the site for its installation. Acrylic is a material that is prone to loss of shape and damage, therefore installation must be done with the utmost care.

There are several options for installing the bath, one of them is installation with the fastening of support legs. This is the most common installation method, as the legs are usually included in the accessories. Radomir equips each model with a detailed installation diagram, which even describes how to screw the legs to the bottom and adjust their height. There are embarkation points at the bottom of the bath, which are marked with an individual sign. In such areas, there may be just a sign, and the buyer has to make the hole himself or it already exists.

Installing a bowl with a frame - this process is performed immediately in production, this is the most reliable and safest way. The purchase of a ready-made kit greatly facilitates the process of installing the bath.

There is also an installation with a homemade frame, it is used in those caseswhen the purchased model needs additional fastening that will protect it from deformation. A popular method is to mount an acrylic bathtub on an aluminum profile, and ordinary bricks are used to give the bottom strength.

You can use several installation methods - this method is called combined. If the bathtub has a frame, then experts recommend using it only for installation.

Taking into account consumer feedback, Radomir bathtubs are of high quality, reliable and durable. In isolated cases, buyers came across a defect, which was quickly replaced by a new product.

Before proceeding with the installation, the hot tub must be carefully inspected, the drain tightness must be checked. Never wash the surface with abrasive products. To clean the hydromassage system, panels and curtains, use only the products recommended by the manufacturers.

The roller guides of the glass curtain should be lubricated from time to time. It is better to call specialists for help, they will do the work without errors, which in the future could lead to a breakdown of the system.

Radomir carefully monitors the quality of its products, controlling every stage of its production, which results in comfortable, high-quality, durable and attractive models.

For information on how to assemble and install an acrylic bathtub from Radomir, see the following video.