How to hide pipes in the bathroom: ideas and ways

To make the bathroom design look complete, you should think over all the details. Any original ideas can be spoiled due to utilities that are left in plain sight. To make the interior of the room look attractive, many users are looking for information on how to hide pipes in the bathroom. The article outlines ideas and methods by which you can cope with this task.

Before hiding the pipes, it is necessary to decide with what material the event will be carried out. It is not entirely correct to choose products based on aesthetic components, since they must have other properties as well.

There are several characteristics that need to be noted.

• A small mass of products. The design should not clutter up a small area of ​​the room, so materials should be chosen that do not require a massive frame. You can use simple wood slats, metal profiles.

• Resistant to moisture. A bathroom is a room with a high level of humidity. The material with which the water pipes will be closed must be resistant to such conditions. It is necessary to choose products that are not prone to deformation and moisture absorption.
• Resistant to chemicals. To maintain the sanitary state in the rooms, household chemicals are used, therefore, the facing material must withstand contact with such products. For this, a decorative MDF plate, plastic panels, moisture-resistant gypsum board are suitable.

To decorate unsightly pipes, you can use decorative grade hardboard plates, which are covered with melamine laminate or volumetric gypsum panels. The last option is distinguished by a variety of textures that realistically imitate wood, bricks, mosaic patterns. They allow not only to sew up the water supply, but also give the room an original appearance. Before sheathing, make sure that the pipeline is in good condition.

And you should also familiarize yourself with the types of water supply.

There are three types of pipes:

• sewerage;
• hot and cold water supply;
• heating system, heated towel rail.

Not every type of communication can be easily hidden behind decoration, even if the layout of the premises involves such events. Difficulties may lie in building codes, because they do not allow pipes to be hidden under the plaster, which are connected using a surge coupling or a lock. All detachable connections must be freely accessible to quickly eliminate the leak. Cold water pipes made of metal, as well as cast iron sewer blocks, often form condensation, so they should be hidden in such a way that there is a minimum amount of air in this area that will circulate and remove moisture. These features should be taken into account and, on their basis, the selection of material for work should be carried out.

Designers are ready to offer numerous options for masking the plumbing in the bathroom.Stylistic solutions may differ in their forms, functionality and type of material used. There are several of the most popular camouflage techniques that can effectively hide unsightly plumbing.

GKL is a practical and convenient raw material that allows you to solve numerous issues related to interior decoration in a home. With its help, they carry out finishing work in rooms of any purpose, as well as create partitions.

Since in such rooms there is an increased level of humidity, moisture-resistant gypsum boards should be used for work. They differ from the standard material in their coating. For these purposes, formulations with impregnated and antifungal ingredients are used. Externally, products can be distinguished only by their color scheme. Moisture-resistant representatives are colored with a green pigment. A frame made of a profile is used as a basis for equipping boxes. The dimensions of the racks should be 27x60 mm, the guides have parameters of 26x27 mm. When creating a box, you need to start with the installation of a supporting structure from a metal profile, after which you can attach sheets of plasterboard to it.

The creation of a decorative box consists of step-by-step actions.

• Markings should be applied to the floor and walls. To do this, find the most protruding point on the vertically located communications and, stepping back from it by 3-5 cm, draw a line. Horizontal markings follow a similar principle.
• The slats are fixed along the marked lines. For fixing it is necessary to use dowels.
• You will need to attach profile crossbars to the rails. You need to connect the components with special crab clamps. The placement step should be 15–20 cm.

• A special tape is used as depreciation. It should be located in areas where the frame is adjacent to the pipeline.
• The frame cladding is carried out using plasterboard strips. During installation, make sure that the front part is on the front part.
• The screws are tightened in such a way that the cap sinks by 1 mm.

• Any box must have a door. To create it, you need to make a hole. To make it invisible, the door must be hinged and finished with finishing material along with the entire structure.
• The top layer of the box is rubbed and plastered. All seams must be carefully closed.
• It is recommended to equip the corners of the box with additional stiffeners in order to increase the strength of the structure.

The choice of finishing for this design is based on the stylistic component of the interior. For such purposes, finishing with ceramic tiles, painting material or simple wallpaper is suitable. Experienced craftsmen advise using latex-based paints, as they are not prone to fading and have a high degree of resistance to moisture. If the created box will be used to close a heating system or hot water pipes, you will need to create several holes in the upper area of ​​the structure. They will allow warm air masses to enter the room.

This event resembles the sheathing of a pipeline using gypsum plasterboard. However, decorating with such material is accompanied by massive labor costs. The tile box has the advantage of being attractive and moisture resistant. It fits harmoniously into the bathroom design and provides additional storage space for various little things.

To remove the riser behind the tiled box, you will need to prepare the frame. It can be made of wood or metal. When working with wooden components, craftsmen recommend treating them with moisture-repellent impregnation. To simplify the construction process and protect yourself from possible mistakes, you need to draw a drawing of the future structure. The sketch should show the dimensions of the elements and the fastening zones.

The creation process consists of the following steps:

• first of all, you need to measure the area in which the water supply system and sewage system pass;
• after that, you can start building the frame. The structure is fixed to the walls, ceiling and floor;
• sheathing is carried out using moisture-resistant plywood or chipboard;

• a special hole for the hatch is made on the front of the structure;
• plywood sheets and chipboard, as well as a technical hatch, should be pasted over with a reinforcing mesh;
• now you can start tiling;
• inter-tile joints are rubbed and processed with an anti-fungal composition.

The shape of the box will depend on the type of pipeline installation. Some users create a structure that hides not only the piping system, but also the sewer. When choosing such a solution, you can use the modern built-in flush cisterns. In many apartments, you can find boxes that are brought out to the level of the sink. Using this method, you can hide unattractive pipes, as well as create additional space for storing household chemicals and household items. To hide the technical hatch, a plastic door is suitable, which is sold in any hardware store.

Blinds are considered the best way to hide pipes and leave them in the public domain at a time. To use the valve or check the meter readings, you will need to raise the curtains, thereby gaining full access to the necessary equipment. In the bathroom, you should choose mechanisms with plastic or aluminum blinds. Such products have good moisture resistance. They are in demand, since they do not take up the free area of ​​the premises. They are often purchased for use in small spaces.

If the opening to be closed has a small width, which does not exceed 0.5 meters, a system with a lace mechanism is required. For wider spans, spring-loaded designs will be optimal. When installing a motorized system with electric cornices, you will need to place the product so that the motor is in a sealed housing. In the role of supports, you can use a gypsum board, a plastic box or a false wall.

Blinds can be installed using the following methods:

• the location of the box inside;
• installation of the structure outside.

The first option is used if it is possible to equip openings with niches with an appropriate depth. Outdoor location is used if the communication pipes are located next to the span. Uninterrupted operation of the blinds is guaranteed if the opening has the correct geometric lines. This indicator consists in the parallel arrangement of the vertical and horizontal planes. Even a slight misalignment can prevent the structure from moving along the rails, making it difficult to use the blinds. You can avoid this situation by leveling the walls or by using the box.

Mounting pipes into a wall is the most difficult task. However, with its help, you can not only hide communications, but also increase the area of ​​\ u200b \ u200bthe room. When choosing this method, it should be borne in mind that, according to SNiP, it is impossible to grind a brick wall or thin-walled partitions in panel buildings.The radial method has a significant disadvantage, which is the lack of quick access to the pipes. In the event of a leak, it will not be possible to quickly stop the situation, therefore, it is necessary to work out in detail all measures to minimize leaks.

To do this, you must observe the following rules:

• there should be no detachable joints in the walls;

• it is recommended to use polypropylene products for laying the pipeline;
• The strobes are equipped with foam or thermoflex sleeves. This solution removes condensation from cold pipes and allows hot water supply lines to expand due to temperature.

There are several simple ways that you can successfully hide pipes.

• Mosaic. This option belongs to the category of exclusive. A wide selection of colors and textures is available to users, so you can create an individual design. When choosing this method, it must be borne in mind that it is suitable for decorating only a wide pipeline.

• The use of stucco and polyurethane tubes. This method is suitable for lovers of aristocratic style. Lightweight material does not need special installation, and a wide range allows you to decorate a room in any direction. Stucco molding is a versatile product that can be easily removed if a leak occurs. Most of the users use the material to hide the vertical pipeline.

• Metal grill. Chrome products are able to decorate a modern bathroom and look harmoniously with plumbing fixtures. Installation is carried out on a metal frame or on the pipes themselves.
• False wall. This is an elegant and discreet solution that can be used to decorate pipes in the bathroom. They are able to hide several pipes at a time, which attracts the attention of most owners of apartments and houses. However, with this method, the area of ​​the room will be noticeably reduced.

If communications in the apartment are not brought into a separate shaft, the use of a plastic box is suitable for decoration. A competent approach will ensure the perfect concealment of vertical pipes with plastic, which will be discreetly decorated to match the color scheme and texture of the walls in the bathroom. Professionals recommend using a protective screen made of plastic, PVC or gypsum plasterboard for decorating vertical pipes. The frame is assembled from a galvanized profile. If you want to hide not only the water supply, but also the heating system with sewerage, you will need to provide insulation and sound insulation.

And also vertical pipes in the bathroom can be hidden behind the cabinet.

To create it, you will need the following steps:

• selection of a cabinet in accordance with the required dimensions;
• fixing frames and hinges on the wall;
• creating holes for pipes on the top and bottom of the product;
• fixing the cabinet to the frame or hinged.

You can hide horizontal communication behind a box, for the creation of which plastic panels, plywood or chipboard are used. To make such a structure, you will need to make markings on opposite walls. When determining the length of the indent, you need to rely on the location of the most protruding point in the plumbing system. Guides are fixed along the marking line. Self-tapping screws can be used for fixing. Jumpers are inserted into the profile, the spacing of which is 60 cm.

On the finished frame, cut sheets of gypsum board or plywood, chipboard are placed. If you wish, you can create a removable box. To do this, you will need to cut the boards based on the height and width of the pipes. They will be positioned vertically and horizontally at a perpendicular angle. The assembled product is installed above the pipes.

Anyone can create a box for the bathroom with their own hands. Many users choose plastic panels for assembly, with the help of which an original decorative option is obtained to hide communications.

Also, a plastic box has the following advantages:

• plastic panels are in demand due to their simplicity and affordability. On sale there is a wide selection of products in different colors and designs, due to which the design can be performed in any style;
• a box made of plastic panels is interchangeable. Any part can be easily removed, which is convenient if you need to partially disassemble;

• no additional finishing is required for such a box. Plastic panels belong to the category of finishing materials, have high decorative properties;
• the structure is resistant to deformation and is quickly repaired. However, plastic has sufficient flexibility and strength, so it is quite difficult to damage it;
• installation of the support frame and plastic is possible even for a beginner who has not previously been involved in construction and repair. The box can be made in one day, for this you will need tools at hand;

• the design has an affordable cost when compared with ceramic tiles and drywall;
• the box is compact and spacious. The products have a small thickness, so they do not need a massive frame. For this reason, the box will take up a small area.

The only drawback of plastic is its low level of fire resistance. Despite the fact that many manufacturers claim the ability of products to self-extinguish, the material is afraid of smoke. Therefore, it is not recommended to smoke in rooms where there is a plastic finish.

To create a decorative plastic box yourself, you need to follow a few steps.

• If steel pipes are installed in the bathroom, you will need to prepare them before erecting the walls. For this, communications are cleaned of old paint and covered with a new layer of coating.
• Then you can start drawing up the markup. You will need to mark the contour of the side and vertical walls. For this, a plumb line with a level is used.

• According to the marking, the guides should be fixed. They are fixed with dowels.
• Then you can start installing the rack profile, which is attached to the rails using self-tapping screws.
• To strengthen the structure, crossbars should be installed. They will provide lateral stability.

Now you can start the sheathing process. To do this, you need to start the panels into the strip, stringing them row by row. Each slab is adjusted to the required dimensions in advance. The panels slide into the strips as much as possible and are fixed with self-tapping screws. When connecting the panels to each other, ensure tight adhesion of the locking mechanism. The final step is to install the external molding. Similar strips are used to finish the joints of the frame part with the ceiling and floor.

To properly hide pipes in the bathroom, you need to familiarize yourself with the key rules of the process. Before hiding communications, you need to think over the design of the future decor in such a way that the pipes have access. Counters, as well as threaded connections should be “at hand”. Knowing the rules, you can avoid mistakes and shorten the repair time.

Experts recommend using the following recommendations in your work:

• make sure the communications are working properly. Many people forget to slope the sewer pipes when they close them behind the box;

• when plumbing or sewer pipes are hidden, it is necessary to provide access to the taps.For this, an inspection hatch should be equipped in the box;
• threaded connections are the weakest points of pipes. Therefore, you need to monitor the tightness of the joints, the condition of the sealant used. And also you need to make plumbing hatches, which will allow you to make repairs when a leak occurs;
• before closing communications, you should decide on the location of household appliances. If you neglect this procedure, in the future, difficulties may arise with the summing up of new equipment.

Many mistakes can be avoided if only high quality materials are used in the work. And also, accuracy is important during repair activities. Neglect of these rules will lead to the fact that leaks will appear in the future, which will entail parsing the box and costly repairs.

See below for more details.