Washbasins for summer cottages: types and step-by-step manufacturing instructions

For summer residents, the question of carrying out hygiene procedures is always relevant, since earthworks require a washbasin. This or that design is installed depending on the availability of water supply and electricity. Consider how to solve the problem with a washbasin, based on various conditions, and what options for washbasins can be used in the country.

The choice of a device for washing depends on the method of supplying water: water supply or a manually filled container. Modern dachas are equipped with a centralized water supply, but most of the dacha farms use water from a well, imported or from an artesian well. This defines the division of washbasins into two types of devices.

The standard faucet device is powered by water pipes. At the dacha, it is convenient to equip such a washbasin next to the garden or in the yard so that the earth does not clog the drainage system. The water is supplied centrally, the owners of the site can only make a drain for the washbasin, a sink and a faucet can be bought in the store. The stand for the sink is purchased ready-made or mounted independently at the desired height and placed in a convenient place.

The disadvantage of this type of washbasin is the limitation of use in the warm season, since with the onset of the first frost, the pipes may burst.

To avoid the failure of the water supply system, before the onset of cold weather, the water supply is shut off and the remaining water is drained from the pipes. A good way to extend the life of a washbasin is to insulate the external water supply with glass wool. This type of insulation will allow to lengthen the operational period for a couple of months a year, but in late autumn, a complete shutdown of the water supply will still be required. The construction industry offers for winter use at the dacha specialized water pipes with insulation and an electric heating element inside the outer circuit of the insulation, which protects the water pipe from freezing along its entire length at low temperatures.

The presence of electricity will allow using the heating element inside the sink. Hot water supply in the country is a luxury; in any weather, you often have to wash yourself with cold water. Today there is a wide range of washbasins with heating elements to make your stay in the country comfortable. Such designs will require good electrical insulation and a float device. The container can be single-chamber, then the heating should not exceed 40 degrees. In devices with two chambers for cold and hot water, a mixer tap is used.

Traditional hand-wash basins are the simplest scheme that uses the pressure of a mass of water: the container is filled with water, a hole is made in the lower part with a valve in the form of a rod, or a tap is installed. Various industrial models of this type are commercially available.

Country craftsmen show wonders of ingenuity, using materials at hand to construct washstands from plastic bottles or tanks. Country sinks are placed in a sunny place for natural water heating.

First of all, you need to organize a drain. In the simplest models, mounted on a rack, this can be a specially equipped drain groove, the walls of which are concreted or pipes similar to the roof gutter are used. For draining, you need to provide a slope and sufficiently high sides to protect against splashes. It is more convenient to use a cabinet with a sink and a drain, which is led into an underground tank or sloped into a designated place on the site.

Let's try to analyze in more detail the models of country washbasins, various in terms of constructive schemes and design.

You can classify country washstands into hinged, frame and pedestal, with or without heating. The only wall-mounted street model in the recent past is a metal or plastic hanging tank with a valve at the bottom. Such sinks are mounted on a pillar or wall of a house or on a frame, and a regular bucket is used for the drain. They require completely manual maintenance and are removed indoors for the winter.

The disadvantage is the small volume of the tank and the need to frequently add water. Improved models have a larger tank - from 10 liters or more. Equipped with a tap to regulate the water pressure.

The high weight of the filled tank requires a frame stand and good fixings to the support. The stand is equipped with a sink and a place for a container for used liquid.

A stationary washbasin for a summer residence is installed on a flat area. The legs of the frame can be sunk into the ground. To maintain an even position, the legs are strengthened with a support made of solid material or legs in the form of an inverted "P" are used. Drainage in dense soils is organized into a drain pit or into a drainage ditch.

The next most difficult water supply is the design of the garden washbasin, connected to the outdoor shower tank. In this case, two problems are solved at once: natural heating of water and the presence of a large volume of liquid. Water supply pipes are mounted to the washstand tank, a float system is installed, or manual filling adjustment is used with an additional tap at the pipe inlet.

In large areas or with a significant distance from the garden from outbuildings, it is worth choosing a model with autonomous water heating. There are options for self-connecting the heating element into a conventional structure without heating water or purchasing a ready-made tank with a built-in heating element.

To heat water with an electric heating element, plastic and metal tanks are used. Choosing a heating element for self-installation, you need to calculate the required heating power. A too weak element for a large water tank will make the heating time very long, a powerful element will make the water scalding hot.

Outdoor washbasins differ in the way they are mounted: on a frame and on a pedestal.The frame can be made independently from wood or metal, as well as purchased ready-made. It is selected at a convenient height, and the length of the support legs depends on the mass of the water tank, and the greater the weight of the tank, the deeper the supports are embedded in the ground. Massive structures will require concreting of the legs to maintain stability.

Another common option is to mount a washbasin on a cabinet of the "Moidodyr" type. Here, the frame is sheathed with moisture-resistant material and has a neat appearance.

The washbasin with a vanity unit is equipped with soap dishes, towel holders and a mirror. These devices create a comfortable environment for use.

Finally, the last type of country washbasin without a cistern and without heating - directly from the water supply system. Pipes are brought to the sink on a pedestal or a decorative support made of wood, stone or metal is arranged. If conditions permit, then a water supply system connected to an electric or gas water heater installed in the house is brought out to the street. Such a system should be located near a heat source.

Washbasins are made from traditional materials: plastic, metal, wood. Lightweight and practical plastic is used for simple attachments with valves or taps and for heated models. Modern plastic is a durable material that does not corrode, is easy to use, and is easily kept clean. Tanks made of galvanized steel or metal are more durable, they will last for many years, provided there is no rust.

The frame is predominantly made of metal or wooden beams. Bollard models are sheathed with plastic panels or sheets of fiberboard, MDF or natural lumber. Chipboards can only serve indoors, since under the influence of moisture, their service is reduced to one or two seasons.

Natural wood trim always looks noble, but moisture destroys the wood and gives it a dark shade, which will look unaesthetic over time. Wooden parts of the cabinet should be regularly treated with antiseptic preparations or painted with oil-based paint.

Garden washbasins, made in a traditional rural style, fit well into the countryside. A win-win option is finishing the cabinet with stainless steel. This design provides a long service life and excellent appearance, which is supported only by wet cleaning with any detergent.

The material for making sinks and taps can also be selected according to your preferences and conditions of use. When choosing a country sink, one must take into account what time of year it will be used and how often. If you just wash your hands before eating or returning to the city, then pick up plastic models. For permanent residence in the country in the warm season, a more durable material is selected - a metal sink or a tank. Faience or ceramics in the country is not the most suitable choice due to the high fragility of these materials.

The size of the water tank depends on the number of users. For a family of four and weekend trips to the cottage, a 10-20 liter tank is enough.The larger size (30 liters or more) is intended for permanent residence of a family outside the city. If you have to go far to get water and you rarely visit the country, then you can opt for simple mounted models of no more than 5 liters in volume. It is necessary to calculate the required amount of water and the size of the tank for heated models so as not to waste extra energy on the unused balance.

The cabinet for the washbasin has dimensions, where 5-7 centimeters for the countertop are added to the size of the sink. Standard cabinets are 60 centimeters wide and 60 centimeters high, 75 centimeters high for the sink and 1.5 meters for the support wall.

The finished washbasin models have a variety of designs. For supporters of high-tech style, it is appropriate to choose a washbasin made entirely of stainless steel. The design of the cottage in the Provence style will be supported by models made of plastic in pastel colors. Pedestals paneled with natural wood panels with a cistern located behind the counter panel and a large mirror are considered classics. The ornament of flowers in the decoration of the outdoor washbasin will harmoniously match the garden vegetation.

A simple country washbasin can turn into a work of art, if its standard design is decorated with plants or give it an unusual shape. A whole summer kitchen in the open air can be made from a frame sheathed with slats. You need to make the countertop a convenient length so that you can cook, transplant flowers or canned vegetables on it. Equip the support wall and cabinet with storage shelves and hooks for utensils and hygiene items.

An original solution will be to decorate the washbasin and sinks with a discharge into the barrels, thereby emphasizing the rural style of your estate. This design is not difficult to implement if there are old barrels on the farm. They need to be sanded, stained with a suitable stain so that the supporting wall and barrels are the same color, and covered with wax or oil. A sink is inserted into the upper part of the barrel, the tank is decorated with a half of another barrel.

Modern minimalist styles welcome simple rectangular shapes with no embellishments. Get a simple solid color white or gray plastic set with a cabinet and place it where you want it. Place flowerpots with flowers nearby, place a wall-mounted washbasin above the curbstone with flowers. You will wash, and the flower bed will be irrigated at this time.

A heated outdoor washstand will require the construction of a canopy to maintain safe operating conditions. Even if the washbasin is not heated, it will be more comfortable to have a roof over your head for hygiene in rainy weather. The simplest canopy can be attached to the frame and have the form of a pitched or gable roof. The roof can be made of profiled sheet, wooden battens or polycarbonate. The use of polycarbonate allows you to build an arched structure from metal arcs.

Well-known Russian manufacturers offer a wide range of ready-made country washbasins that meet the diverse needs of consumers and have a wide price range. The most popular heated models are washbasins "Elbet" - inexpensive devices with a powerful water heater, temperature sensors and a large water tank. According to summer residents, they have good performance.

Are not inferior to them in quality washbasins "Spring"... They are made of stainless steel, which significantly increases their service life. Available in both heated and non-heated models, the tank has a volume of 16 liters or more.

"Sadko" Is a compact model with a polypropylene body, the water tank holds more than 18 liters.Consumers note the ease of assembly and installation, convenient and durable fastening of structural parts.

Decent washbasins are offered by companies such as "Cascade", "Summer resident", "Chistyulya", "Double", "Leader", "Waterfall", Obi... Production of the company "Aquatex" has gained popularity due to its good quality and budget prices. Washbasins have a variety of designs, tank volumes over 20 liters and heating. When choosing a model, you need to pay attention to the heating method. "Dry" heating is provided by a steatite pipe with a heating element inserted into it. This method allows you to quickly heat water without the formation of scale, they do not break when connected without water. "Wet" heating is similar to the operation of a boiler, it is less safe and more prone to breakdowns, which makes the price of such washbasins somewhat lower.

When choosing a model in a store, you need to be guided by the following reasons:

• season of use, whether heating is required or not;
• outdoor or home mode of operation affects the choice of material of manufacture;
• tank size based on the number of users;
• case design.

Having determined these criteria, it is enough to simply select and install a washbasin in the country with your own hands. The main task is to securely fasten the water tank to the support. If this is a finished model with a body, you need to follow the instructions exactly and firmly fix the tank to the panel, this will ensure safe use.

Self-placement will help to implement the set of terminals and fasteners that are included with the sale. The frame is purchased ready-made or made from scrap material. The metal legs of the frame are sunk into the ground in proportion to the weight of the filled water tank - the heavier, the deeper. The height of the frame is calculated based on the proportionality of the person's height, but so that the tank hangs at least 1 meter from the ground.

For greater stability, a frame is made in the form of a pedestal. It is made as follows: corners are prepared from steel 25x25, or a wooden bar with a section of 50x50. Measure the dimensions of the shell and calculate the dimensions of the frame. Parts are cut from a metal profile or bar to the required length and screwed or welded by hand. If you want to make a closed structure, the frame is sheathed with wooden slats, chipboard or MDF panels or plastic and a sink is installed.

Plastic sheathing of the frame is a more practical option for outdoor use. The curbstone can be coated with moisture resistant paint. It is worth noting that the paint on the outdoor washbasin will have to be renewed annually. Particleboard and MDF panels are only suitable for home use. To extend the life of the frame, you need to isolate the legs from soil moisture. For this, the metal is painted with an anti-corrosion compound, and the wooden parts of the structure are treated with anti-rotting agents. The drainage of water is organized either autonomously - into a bucket under the sink, or permanently - into a drain pit. For a stationary drain, a sewer drain pipe is mounted at the back of the cabinet.

The back wall is built on with a vertical frame on which the water tank, mirror and towel hooks will be fixed. The side walls of the curbstone are sewn up with panels, the back wall can also be sewn up with a panel, and when installed against a wall, it is left open. On the front wall of the curbstone, they hang a door on hinges or leave it open; if desired, this place can be decorated with a curtain. An outdoor washbasin is best placed on a solid paved area.

It is not difficult to make a heating system on your own; you need to purchase a heating element of the required power. It should correspond to the size of the water tank. It is better to opt for models with a thermostat. The heating element is attached to the side wall of the tank at the bottom of the container. An overhead location will make heating less efficient, the heating element will often burn out from a decrease in the water level.Installation of a heating element is associated with the need for careful insulation of terminals and wires.

For long-term operation of a country sink, certain rules must be observed. Before the start of the winter season, be sure to drain water from all containers and pipes. If, nevertheless, the pipe froze during early frosts, then the damaged area is repaired: couplings are installed on breaks or a piece of pipe is replaced. It is easier to perform this operation with polypropylene pipes. In case of failure, heating elements are replaced with new ones. To do this, you need to purchase a model with a similar design and power.

Heated washbasins are best used indoors. An outdoor heated tank must be placed under a canopy. For the winter, a washbasin with a heating element must be removed to the shed or house. All metal parts must be well dried and the washbasin must be wrapped in dry plastic wrap for winter storage. It is advisable to remove the plastic cisterns of the bulk washbasins for the winter from the support and put them into the room, since ultraviolet light and temperature drops destroy the plastic, and the ingress of moisture into the tank during freezing contributes to the deformation of its shape.

The placement of the washbasin in the country depends on the needs of the household. A simple structure is installed in the garden, where a hinged tank is attached to the frame. Curly annuals can be planted around the legs of the frame to decorate the supports. It is more convenient to use a cabinet with a sink in the yard. The advantages of an angular arrangement are the creation of an area for hygiene that is hidden from prying eyes. If you decorate it with plants or paintings, this area will acquire a special charm. Advanced summer residents place cabinets with computers for adjusting the heater in the country kitchen, bathhouse or shower.

It is very convenient to purchase a model of a washbasin with a pump for pumping water using a foot pedal, where the tank is connected with a special hose to a common tank for water intended for household needs. The pump allows contactless filling of the wash tank with water, which will be a great advantage when working with the ground and for hygiene purposes.

Dacha craftsmen with invention and imagination equip a corner for washing, creating stylish compositions of wood, stone and metal.

In the next video, you will see how to make a do-it-yourself washstand for a summer residence.