Washing machine under the sink: set options

The most ergonomic location of the washing machine is in the bathroom or in the kitchen, where there is access to sewerage and plumbing. But often there is not enough space in the room. And then it becomes necessary to "fit" this technique into a limited space, for example, to put it under the sink.

The decision to place the machine under the sink is most often dictated by the small amount of square meters or the desire for minimalism in the interior. One way or another, you cannot put equipment with standard dimensions under the sink.

It must be special and meet several criteria.

• Match in height. Not only will it fit into the distance between the floor and the sink, but there should still be a small gap left. The optimum height of the unit is considered to be up to 70 cm. The only exceptions are units that are mounted under the countertop. Their acceptable height reaches 85 cm.
• A slim and small washing machine is ideal for such an installation. The unit should not stand close to the wall, as usually a place is left behind the machine for installing a siphon and pipes.
• The width of the appliance should be less than the width of the sink. The washbasin must "cover" the machine and thereby protect it from possible ingress of excess water drops.

In total, there are three options for placing small-sized cars.

• A ready-made set with a built-in machine under the sink. And with all the accessories included.
• A separate appliance that adapts to the sink. All kit components are purchased separately.
• The washing machine is built into a sink with a worktop. In this case, the apparatus is located on the side of the washbasin.

The best solution is to buy a ready-made kit, because you do not need to travel around the city in search of parts that match each other.

The most popular complete washing machines are two models.

• Candy aquamatic complete with Pilot 50 washbasin. The height is 69.5 cm, the depth is 51 cm, and the width is 43 cm. There are five models of this typewriter. They differ in the speed of rotation of the drum in the spin mode. They are all budget options. They can be used to wash up to 3.5 kg of laundry;
• Eurosoba complete with sink "Messenger" has dimensions 68x46x45 cm. This is a very popular model. Autoweighing is provided in the programs. The manufacturer confirms the high quality with a long service life and a guarantee.

It is noteworthy that washing machines under the sink are produced only for the Russian segment, often the equipment is assembled in the Russian Federation. Bosch, Zanussi, Electrolux, Candy, Eurosoba are those manufacturers of equipment, in the model range of which you can find machines for installation under the sink.

In household appliances stores, there are compact-sized washing machines.

• Zanussi FCS 825 S. The height of the product is 67 cm, width - 50 cm, depth - 55 cm. Due to its dimensions, a conventional siphon can be installed under such a device. True, the machine is inferior in characteristics: the drum rotation speed is a maximum of 800 rpm, and the maximum load is 3 kg. There will be slightly damp laundry at the exit, but it is quite quiet.
• Zanussi FCS1020 has the same characteristics as the above model, but only the speed is higher and is 1000. Both machines are budget.

• Electrolux. In the model range of machines there are two options with parameters 67x51.5x49.5 cm - these are EWC1150 and EWC1350. They differ in maximum speed of revolutions per minute. They are reliable and economical, but not the cheapest. Their capacity is 3 kg.
• Candy Aquamatic Machine Series includes five machines with dimensions 69.5x51x43 cm. They have different spin speeds (from 800 to 1100 rpm).
• Eurosoba lineup reliable. The product warranty is 14 years.

It will be necessary to purchase a special sink for these devices. It doesn't have to be very deep. Most often, to install a washing machine under the sink, they buy a "water lily" type sink and a non-standard siphon, and also make a horizontal type drain. Sometimes, for example, if the sink is installed very high, then a standard siphon and a vertical drain are used.

It should be noted that the washing machine can also be installed under a sink with a countertop. It is these kits that allow you to install a standard (more practical) siphon, a vertical drainage system and thereby protect the device from possible water ingress. In addition, due to the fact that the washbasin is located on the side of the countertop, it is possible to "steal" 10-15 cm. And the height of the household appliance may already be 80-85 cm.

On the plumbing equipment market, there are models of washing machines that fit perfectly under the sink with a countertop.

• Bosch WLG 24260 OE. The model is 85 cm high, 60 cm wide and 40 cm deep. It has a large capacity (up to 5 kg) and a good selection of programs (14 pieces). In addition, the machine is equipped with an anti-vibration program.
• Bosch WLG 20265 OE has the same parameters as the Bosch WLG 24260 OE model. The loading of the unit is up to 3 kg.
• Candy CS3Y 1051 DS1-07. The equipment is 85 cm high, 60 cm wide and 35 cm deep. This is a budget model with a capacity of up to 5 kg. It has 16 washing programs. According to the manufacturer, an anti-vibration program is installed in the machine.
• LG F12U2HDS5 represented by parameters 85x60x45 cm. The capacity of the model reaches 7 kg. This option is quite expensive, because it has 14 wash programs and vibration control.

• LG E10B8SD0 has a height of 85 cm, a width of 60 cm, a depth of 36 cm. The equipment capacity is 4 kg.
• Siemens WS12T440OE. This model is presented with dimensions 84.8x59.8x44.6 cm. Its main advantage is silent mode.
• Indesit EWUC 4105. This version has a shallow depth, which is only 33 cm. Other parameters are standard - 85 cm high and 60 cm wide. The maximum load is 4 kg.
• Hoover DXOC34 26C3 / 2-07. The unit is only 34 cm deep and can be loaded with up to 6 kg of laundry. There are 16 washing programs available.

The sink machines are compact. They are able to organically fit into both a small, limited space and a fairly spacious room. The main advantage of such structures is, first of all, their compactness and laconic appearance.

However, a fat plus in the form of non-standard dimensions can turn into the following disadvantages:

• Due to the design features, you have to bend low, which is very problematic for people with a sore back;
• Built-in devices vibrate more, that is, the vibration from them is more noticeable. When the machine is securely attached to the top (washbasin or countertop), vibrations are damped, but at the same time, during the spin cycle, the washing machine begins to rattle and knock. And besides, because of this mode, bearings fail faster. It should be noted that washing machines with an already built-in sink do not produce loud sounds and bearings work longer in them;

• Horizontal drain and non-standard siphon are more likely to get clogged. And also leaks are possible, waste water can come out through the sink;
• Quite limited access to plumbing hidden behind the typewriter. It can be difficult to "get close" and eliminate the defect;
• If the machine is not purchased complete with a sink, then it will be necessary to buy a washbasin, a siphon and other components in completely different stores;
• There is a possibility, albeit small, of an unexpected short circuit due to the ingress of water on the device.

When choosing a machine under the sink, you should pay attention not only to its dimensions, but also how the plumbing will be installed, as well as the functionality of the device, the quantity and quality of the installed programs. Despite the small load, a family of 2-3 people may well have a small washing machine. Based on this, you can look at a machine with "family" functions that have many washing programs, including those that allow you to wash very difficult stains, as well as with protection from curious children's hands.

The material from which the internal parts are made, especially the drum, can tell how long a technician will last. Preference should be given to metal structures. A big plus in the choice of technology is a big guarantee from the manufacturer.

The criteria for choosing a sink should also not be limited by size. An important aspect is where and how the water will go. The type of installation of the siphon depends on this. The best option would be with a drain device closer to the wall or in the corner. In shape, water lilies can be rectangular, rounded. This parameter is selected individually, the choice depends on personal preference.

The depth of the washing machine depends on the dimensions of the sink. If the width of the sink is 50 cm, then the depth of the device is 36 cm.When the sink is wider, for example, 60 cm, then the depth may already be 50 cm.If the pipe still does not fit, additional work will be needed to build a small depression in the wall.

The preliminary stage before installing the equipment will be collecting data for future work. It will be necessary to make all measurements and markings. You will need to go to the store and purchase either a ready-made kit, or first a typewriter, and then a sink. After all, the sink will have to protrude somewhere 4 cm above the apparatus.

Measurements will help you imagine how the finished kit will look in practice, and besides, there are some rules that are undesirable to break. Thus, the siphon must be 60 cm above the floor. The drain must not be installed above the machine. When all measurements and markings have been made, all the parts of the kit have been purchased, you can go directly to the installation of the sink. When using a sink siphon under the washing machine, you need to mount a non-return valve in the drain outlet, and fasten the hose itself with clamps. The drain connections are best placed at some distance from the machine.

When the sink installation comes to an end, you can go to the siphon. All connecting parts must be lubricated with silicone. Fasten the drain hose together with the siphon connection using a clamp. Fix the siphon connection to the pipe. Use sealant to seal the gaskets. The main thing is that the siphon is installed above the openings of the sewer pipe. Next, you can proceed to the installation of equipment. Adjust the position of the clipper using its feet. Connect all communications consistently. When installing the machine, you should strictly follow the instructions in the instructions.

The washing machine under the sink is almost no different from conventional appliances, except for the size and sometimes a limited number of programs and spinning revolutions.

Therefore, it must be operated in the same way as other machines, the care for it will be the same.

• It is necessary to maintain cleanliness and order both outside and inside the apparatus.
• Each time after washing, the following procedure will be useful: wipe all rubber cuffs, the hatch and the drum, first with a damp and then with a dry cloth. Then leave the machine door open for ventilation.

• Make sure that no foreign objects, which so often accumulate in pockets, fall into the machine.
• If the water is hard, then it is logical to use special means that would soften it.And also in no case should you use detergents (powders, bleaches) that are not intended for the machine.
• If a non-standard siphon and horizontal drain are installed, then it is necessary to clean the pipes more often.

A washing machine under the sink will help to organize a practical and stylish space. It will become an indispensable device that will greatly simplify your life. And at the same time, it will not interfere with the passage, but will be compactly located under the sink.

For sets consisting of a washing machine and a sink, see the following video.