Making a shower cabin without a pallet with your own hands in an apartment

The bathroom performs a very important function for all residents of the apartment: if there are no proper conditions, then it is very difficult to maintain hygiene. The options for such a room can be very diverse, and they depend, first of all, on the dimensions of the room. For a small bath, it is impractical to have a large amount of furniture. In this case, everything should be simple and concise, as a result, a shower cabin without a pallet will be the best choice.

To have a good and comfortable bathroom is the desire of any person. Therefore, when preparing for the repair of this room, it is important to decide on the availability of what is needed in it. If there is enough space, then you can afford to design a beautiful room with a variety of possibilities, where there is a place for drying, and for washing, and for cabinets. If the dimensions of the room do not allow adding a large number of components to it, then it is important to leave the most important thing.

A shower cabin without a pallet in an apartment with a small area will be a real godsend. It is possible to make it yourself. The difference between such a booth and a booth with a pallet lies in certain nuances that you need to know about when planning the choice of a place for swimming.

The advantages of a palletless design include:

• visual increase in the size of the room;
• creation of an original design using a new design;
• the convenience of using the shower, especially for children, elderly people and people with health problems;
• ease of installation of such a booth;
• ease of cleaning the bathroom;
• does not require large financial investments.

The lack of a pallet is compensated by a ladder through which water is immediately discharged from the floor surface into a drain pipe. In order to make this drainage system, it is necessary to raise the height of the floor (if we are talking about an apartment) or to design this room in advance, taking into account the future bathing place.

A shower stall without a pallet has a number of disadvantages, which should also be mentioned:

• with an unprofessional and improper installation of the ladder, the water will not be completely removed from the booth, and it will be wet all the time;
• if there are no sides in the booth, even the lowest ones, then after taking a shower and opening the doors, the residual water will flow out;
• in the event of any breakdowns in the drainage system, there is a high risk of flooding the neighbors who live on the floor below;
• if the siphon is incorrectly installed, then an unpleasant and stale smell will be felt in the bathroom.

It is for these reasons that most often they resort to the help of professionals for the installation of such booths. If you want to do everything yourself, then you should not rush during construction work: each stage must be calculated to the smallest detail and checked repeatedly.

If a shower stall with a pallet takes up a lot of space, then using a structure without a pallet with translucent partitions will make the room spacious and large.

Using glass or tiles in a booth without a pallet will give a sleeker look than acrylic or polycarbonate booth doors with a pallet.

In the booth itself, you can use a tree to arrange the floor.to make it more comfortable and comfortable to stand on.Polished oak or walnut works best and must be opened with a waterproof varnish. Such treatment will reduce sliding on the surface and will become a heat-insulating layer for the floor, if the warm floor was not originally designed.

To create a drain, you need to make an additional depression in which the ladder will be placed. It is best to create an additional threshold, which, in addition to the decorative role, will also carry a functional load, preventing water from entering outside the booth. In the bathroom, such protection will help to avoid many problems, and therefore will not be superfluous.

Modern bathroom design can be simplewhen the cab is installed in the place designated for it, and the remaining space is allocated for other needs. However, the design of this room can be much more interesting, for which additional walls or partitions are being built. The shower in this version looks unusual, but beautiful, because the booth turns out to be hidden behind the partition and does not catch the eye.

A new solution in the design of the booth can be a ceiling water spray, which can be installed directly into the ceiling, and not fixed to the wall. Thus, it is possible to save water and prevent it from getting outside the booth.

When planning a new bathroom design and the appearance of a cubicle in it, it is important to take into account all the factors so that the shower is pleasant and comfortable.

The corner in which the booth will be located should be located where there are drain pipes so that water drains out as quickly and safely as possible. It is desirable that the doors to the room be far enough away, which will make it possible to visually make the bathtub larger and more spacious.

For a beautiful room decoration, you can use bright tiles. In addition, you should ensure that the color and stylistic solution of the walls, floor, booth and furniture are combined.

When planning the creation of a shower stall without a pallet, it is worth thinking about the materials from which the walls will be made.

• Plastic. It looks nice and makes the whole structure light and transparent. Plastic walls will serve for a very long time. In addition, they are very easy to care for, and the material can be purchased at an affordable price.
• Glass - the material that is most often used for booths without a pallet. The glass surface can be transparent, matte or combined. Modern doors can be iridescent or colored, which significantly expands the possibilities for room design.

Doors for such booths can be made of ordinary or painted glass.

• Glass blocks - This is the most versatile option for a bathroom stall. By installing a glass block, you can divide the space in the room and allocate an area for comfortable taking a shower.
• PVC curtains used for open booths. They are quite dense and do not allow water to pass through, but are used only while taking a shower. The cost of the curtains is low, so they can be periodically updated, creating a new interior of the room.

To select the size of the shower stall, you need to focus on the bathroom itself. In a small room, it is best to install a 100x100 cm booth, in which it will be comfortable to swim and do all the necessary hygiene procedures. If it is possible to make a more bulky structure, then its dimensions are set individually.

The size may depend on the characteristics of the figure of the people living in the apartment: for the thin ones, the minimum dimensions will be enough, but it will be much more convenient for full people to take a shower in a spacious room.

Thinking about a shower stall without a pallet, it is important to take into account the height of the room from floor to ceiling.To create a ladder, you need to raise the floor level by at least 10 cm, so in low apartments this will become a difficulty, especially if the household is tall.

In addition, it is possible to purchase asymmetric shower stalls, where one wall will be shorter than the other. The minimum size is considered to be 70 cm, and the maximum can be chosen according to your own preferences.

When planning the installation of a shower stall without a pallet, it is important to clearly understand what exactly needs to be done.

The first step is to determine the location for the booth., after which the preparation for the installation of the ladder begins. This is the most important stage, on which the full operation of the structure and comfort when taking a shower depends. There are many options for ladders, therefore it is important to choose the one that will best cope with the drainage of water in a particular room.

Some structures are equipped with an addition that allows floor heating, which is important for rooms where there is no heating, but there is a need to take water procedures.

The ladder is a very durable product that can withstand a weight of up to several tons. Temperature imbalance is not at all terrible for such equipment: a difference from minus 50 to extremely high temperatures will not affect the performance of the ladder. The drain consists of a grate, a siphon, a drain ring and a steel flange.

The use of a vertical ladder is typical for the private sectorwhere the sewer is removed from the floor. The horizontal version is suitable for apartments, where, with the help of a side outlet, water flows into the sewer pipes.

When laying tiles on walls and floors, it is important to do so so that the wall overlaps the floor and the joints are well filled with waterproof material.

It is better to choose the walls for the booth from glass (from 6 millimeters thick). If the design is angular, then the bathroom tile will be used as the back wall. If the booth stands apart, away from all walls, then each of its walls is a glass partition. If the contact goes only with one wall, then partitions with a door are installed from the other three.

Shower cubicles without a pallet can be square, semicircular, rectangular and round. The choice of the form depends entirely on the size of the room where the booth is located and the dimensions of those people who will use it.

Depending on the type of construction, the location also changes: square and rectangular can border on only one wall or stand apart, the round one will be near the wall, and the semicircular one will stand in the corner, connecting the two walls of the bathroom.

To prepare the base for the shower stall, a complete dismantling of the old cover is required. This is important in order to get to drains, arrange new drainage and install a drain. All fittings that interfere with work must be removed, and dust and dirt must be removed completely. The base for the floor covering must be absolutely flat, without any height differences. The walls with the base are covered with insulating mastic.

The floor in the booth must be made at a slight slope to the place of the water drainso that it does not spread throughout the booth and drips quickly. Drains can be made both in the center and in the corner of the shower area. To drain water, you can use both a drain and a channel, which is easier and faster to install.

For the correct installation of all structures, it is important to correctly work with the floor. The first layer should be concrete, then foam, on which the waterproofing is laid. Then another concrete layer must go, which is revetted and completes the construction of the floor.

Drainage channels must be installed before all these works, otherwise it will be too late to change something. Completing the floor with a drain is also thought out in advance and taken into account with each new layer of the floor.

The system of arranging a booth without a pallet is quite complicated, therefore, without experience, it is important to think through the entire workflow step by step and not deviate from the planned plan.

Replacing the old floor is necessary, because without these actions it will not be possible to get to the base of the pipes and equip a new water drainage system. If the floor is drained incorrectly, then instead of a timely outflow of water, it will accumulate and (if the sides were not provided) moisture will be in the shower.

The surface on which you have to stand in the booth can be made using various materials. It is best to cover the floor with wood flooring, which is environmentally friendly and pleasant for direct contact.

So, specially processed wood can last a long time without changing its appearance, and the tiled floor area will look aesthetically pleasing, especially if the tile complements or continues the main design idea. In addition, it will not let in moisture and will reliably protect the floor, but it is not very pleasant to use it without heating the floor or rug.

When preparing the base, you need to take into account all the important points, think over the design completely in order to avoid mistakes. The most important thing is to properly equip the water drainage system from the shower stall. It is necessary to make all the necessary layers, which should be at the base of the bathing area. If you are not confident in your abilities, it is better to invite a specialist (or at least consult with him).

For the installation of the shower stall, it is important to make the right base on which the further structure will be erected.

When the old flooring has been dismantled and a new drainage system is installed, it is necessary to correctly finish the construction of the base and lay it with tiles. You can choose the usual type of coverage, but it is recommended to use small, mosaic tiles, which will be much more pleasant to be on during bathing. Before proceeding with the installation of the coating, it is important to take care of waterproofing, which is extremely important for the bathroom.

Having a ready-made base, it is important to check its slope, which is set even at the stage of floor screed. If it is done incorrectly, then the convenience of using the booth will be questionable.

When the base is ready, you need to use finishing insulation, for which the mastic is applied to the floor and the lower part of the walls, which will be in constant contact with water. The joint with the floor and the drain must be additionally treated with a waterproofing tape, on which another layer of mastic is applied.

Laying the tiles themselves begins in the bathroom not from the floor, but from the walls, which provides greater protection of the room from moisture. On the floor in the booth, installation will be easy if the slope to the drain is located in the far corner. But if it is located in the middle, then you will need to cut the tile so that it fits correctly. In the booth itself, you can use tiles of a different color to highlight this area.

When all surfaces are tiled, the joints between the tiles are filled with silicone sealant.

The installation of the booth itself will be the final stage.

Thinking about purchasing a shower stall without a pallet, it is important to choose a suitable option for yourself, of which there are not so few:

• frameless type;
• type without vertical profiles;
• base with a frame;

• booth profile for gold, copper, brass;
• joining glass and plastic;
• using curtains instead of partitions;
• doors with a sliding structure;
• opening single doors.

The location of the bathing area is thought out in advance, as are the dimensions of the booth, therefore the partitions are bought exactly in size. The choice of color and texture is also thought out at the planning stage, so that after finishing work with the base and facing with tiles, you can safely mount the walls.

It is easier to build such a shower room in a house than in an apartment, but with a great desire and skill, you can cope with it yourself in a high-rise building.Installing a side rail will prevent water from leaking out of the booth.

When building a shower stall without a pallet, you should follow the recommendations of specialists.

• When creating a structure in an apartment or house with a shower stall without a pallet, it is important to correctly calculate the slope for draining the water. It is usually done with a 1 cm difference per meter, which allows the water to flow in the right direction, and there is no risk of injury.
• A beautiful and comfortable floor arrangement is possible with small tiles. If you use tiles of standard dimensions, then it will be very difficult to work with it, especially near the drain. Small tiles make this task easy, although they take more time to work.

• When installing a drainage system, it is important to do everything right at once, because repairs after the completion of the booth will no longer be possible. Take your time at this stage.
• Starting work with the floor (in particular, in the booth itself), you should do the masonry from the drain.
• When purchasing the necessary materials, it is worth taking them with a small margin (in case of unforeseen circumstances). It is better to buy quality products that will extend the life of the bathroom as long as possible.
• If the dimensions of the room allow, then, in addition to the shower stall, you can leave the bathtub: the combined structure will look interesting and unusual. Also, such a solution will be practical and will make it possible to quickly take a shower and soak up the bath.

When deciding how exactly the bathroom will look like and which shower stall to choose, you need to look at the options for ready-made rooms, which will help you find the ideal option for a particular room and a family that will use it.

The bathroom, made in light colors, contrasts with the booth, inside of which there is an imitation of brickwork.

The low base booth is convenient to use, especially for certain population groups.

Having chosen bright-colored tiles for the floor, it is quite logical to make the entire interior of the booth in the same color.

Light colors of the bathroom provide lightness and unobtrusiveness.

The angular arrangement of the booth saves space, and the transparent tinted walls visually do not take away the space of the bathroom.

For those who want to quickly and inexpensively make a stall in the shower, you can use the option with placing it near the partition, and as protection against splashes, you can put one long glass wall. It is better not to highlight the shower area with color, which will make it completely invisible. In this case, you do not need to make either a roof or doors, only a base and one wall. If there are concerns about water getting outside the booth, then you can curtain the entrance to it with a curtain.

Any shower renovation option will look good if it is prepared and implemented with passion. Skillful hands and the desire to make your home more comfortable can turn any room into a work of art, while maintaining the functionality of the room, and sometimes expanding its capabilities.

See below for more details.