Subtleties of cleaning a shower head from limescale

After renovation, all plumbing in the house has an ideal appearance, but months or even years of use give their results, and soon they are covered with plaque. This applies to taps, metal elements and a shower head, which ceases to function normally and introduces discord into the overall environment.

Cleaning a watering can from limescale is a rather complicated and tedious process., but there are many methods and techniques that can greatly facilitate cleaning the bathroom. It is important to understand that it is almost impossible to get rid of limescale forever, so experts advise you to regularly take care of the plumbing in order to avoid complex contaminants that are difficult to remove with usual means.

At the preparation stage, it is necessary to determine what exactly is clogged with plaque, since not only the watering can, but also the hose itself can get dirty. You can check this when the shower is disassembled. First, a jet of water is passed separately through the watering can and then through the hose. If the hose is difficult to pass water, it means that so much plaque has accumulated there that it narrowed the passage.

When the watering can does not allow water to pass through or it is difficult, you need to wash the nozzles, which are responsible for the good water pressure.

The most popular option for cleaning plumbing, in particular watering cans, is the use of harsh and well-known household chemicals. This applies to products that contain potent components like chlorine. Products such as Dressing Duck, Cillit Bang, Mister Muscle or Sarma allow you to quickly remove plaque and any other contamination.

You must follow the step-by-step instructions for cleansing the watering can.

• Before starting cleaning, it is advisable to disassemble the watering can in order to thoroughly clean all the outlets. It is better to carry out the disassembly process according to the instructions, since there are different types of watering cans, and some of them cannot be disassembled. If the instructions are lost and the sanitary ware cannot be disassembled, do not use force. Perhaps a watering can is installed in the shower, which cannot be disassembled, and the use of force may result in breakage.
• Some housewives simply wipe the watering can with a cleaning agent using a sponge or a stiff brush. This option is only suitable for those who regularly take care of the plumbing, so there is not much plaque.

• In most cases, the watering can must be soaked in a bowl with a special solution (cleaning agent according to the instructions and water) and left for several hours. Chemical components contribute to the destruction of limescale, so over time it can be easily removed with a regular sponge or damp cloth.
• It is necessary to check hard-to-reach places, as there are often residues of plaque in the spray nozzles.
• You can remove plaque residues from hard-to-reach places with a stiff brush (toothbrush) or toothpicks.
• After all stages of cleaning, it is advisable to rinse the product and wipe it with a dry cloth to a shine in order to avoid various streaks or stains from drops.

For each type of watering can, it is necessary to select its own cleaning method. There are such options when the product is fixed at a height and it is impossible to remove it, therefore, the method with a basin disappears. The hostesses have come up with an equally interesting and, most importantly, effective way to clean such a watering can.

To begin with, a soapy solution is poured into a high-density plastic bag., after which he is put on the shower in such a way that the watering can is completely in the water. The bag is fixed and this structure is left for several hours, depending on the intensity of the contamination.

Despite their high efficiency, modern detergents do not always cope with pollution, and they may simply not be at hand, so housewives have come up with many other methods of getting rid of limescale with means that can be found in any home.

This is a fairly versatile product that can get rid of many types of dirt, including limescale. It is important to ensure that the percentage of vinegar essence is not very high, as you can simply ruin the coating. It is best to use the most inexpensive 7% concentration.

It is better to carry out the cleaning procedure with gloves, because vinegar has a high level of acid, which, in contact with the skin, leaves burns or causes irritation.

The watering can must be placed in a container with vinegar heated to 50 degrees. Instead of a container, you can use a bag that is wrapped around the base of the watering can and fixed with an elastic band or simple knots on the polyethylene itself. This design is left for 20 minutes, after which it is rinsed, and the watering can is wiped with a rag or sponge until it shines.

Lemon is often used instead of vinegar, as the fruit contains a high level of acid, which breaks down plaque and allows the watering can to return to its normal appearance. You will need 3 packs of citric acid per liter of water. A watering can is lowered into this solution and left for two hours, after which it is washed under running water.

It is not superfluous to pour it with fresh lemon juice before soaking.

The composition of modern children's oils is so diverse, and sometimes even dangerous, that such cosmetics are able to dissolve limescale. During the cleaning process, apply a small amount of oil to the watering can and, over time, clean it with a sponge or stiff brush.

After removing plaque, you will have to rinse the watering can with soapy water and wipe it dry to give it an attractive appearance.

A special cleaning solution, which is made from baking soda, ammonia and vinegar, copes well with removing plaque. For one liter of water, you will need 3 tablespoons of soda, about 150 ml of ammonia and one and a half glasses of vinegar. The resulting mixture must be thoroughly mixed and heated to a temperature of 60 degrees.

The watering can is left in the solution for at least 40 minutes, and in difficult cases the time must be increased. At the last stage, the product is washed with warm water and wiped dry with a napkin.

This substance is extremely corrosive, therefore it is used in rare cases. It is used when other chemicals cannot cope with plaque.

You can buy acid at the pharmacy, it is not so expensive. The solution is prepared at the rate of 2 tablespoons of acid per 1 liter of water, while the resulting mixture must be stirred until it is completely dissolved. The concentration of the agent can be increased if necessary, but this should be done with extreme caution.

After the solution is prepared, a watering can is immersed in it and left for a while, then the surface of the product is thoroughly cleaned with a brush. A mandatory item is rinsing the watering can under running water to avoid streaks from the product.

It is important to treat the entire surface, since small pockets of contamination often remain in hard-to-reach places. Even small deposits can completely ruin the result, and soon you will have to start cleaning again.

To avoid serious contamination, it is recommended to wash the watering can more often, like all plumbing fixtures, because small contaminants are removed with conventional plaque removers, and large lime deposits are much more difficult to cope with.

Chemicals pose a danger to human health, so they must be used with extreme caution. It is advisable to clean in a well-ventilated area and use gloves and a respirator as protection.

Special water filters prevent limescale build-up, which is an excellent preventive measure.

Filter nets can be installed on the shower hose connections as well as on the water inletthat will eliminate the need to constantly deal with limescale.

It is advisable to test the product in an inconspicuous area, since overly aggressive components can ruin the coating. Don't forget about it.

For each contamination and type of watering can, you need to find your own means and method so that cleaning is easy and brings visible results.

For information on how to clean the shower head, see the video below.