Dryers for clothes "Liana": characteristics and installation instructions

Most residents of urban high-rise buildings dry their clothes in their apartment. At first glance, it is quite simple to equip a place for drying things indoors. However, it should be remembered that the installed structure should be as efficient and convenient as possible, and also not take up much space. The Liana clothes dryer is an ideal option even for small apartments. The design characteristics and installation instructions will be discussed in more detail in this article.

For drying things in multi-storey city buildings, ropes were previously mainly used, which were attached to iron structures on the outside of the balcony. This option, of course, saves space in the apartment. However, clean items on such a dryer can easily become dirty with dust or fall off the rope altogether. Ordinary clotheslines can also be attached in the room itself. However, it is quite difficult to arrange them optimally. If the rope weighs too high, it will make it difficult to hang and remove the laundry. When placed low, clothes can get in the way or get dirty by touching other objects in the room or on the balcony. In addition, dust accumulates on the ropes rather quickly and it will not be possible to completely remove it with a simple damp cloth.

The design for drying "Liana" is compact and functional, which allows you to install it in bathrooms, on loggias and balconies almost at the very ceiling. The main feature of the operation of such a system is that small strips on which things are placed can change their position (lower or raise).

Among the advantages of the Liana dryer, the following can be noted.

• After drying, there are no traces left on the laundry, like from thin ropes or lines that would be difficult to iron with an iron.
• Easy to care for. The structure is easy to clean from dust and dirt. To do this, wipe it with a damp cloth. When drying laundry, you can be sure that there will be no dirty marks from the dryer on the fabric.
• Compactness. The device can be installed high enough, so that "Liana" will be almost invisible.
• Resistant to heavy loads. One tube can hold up to 2.5 kilograms of clothing. If you comply with this requirement and do not hang too much clothes on the tubes, then the structure will never break and will not bend from the weight of the laundry.

• Easy to use. Such a system works by analogy with an elevator. By lowering the planks to a comfortable level, you can easily and quickly hang the washed items without getting up on a chair or trying to reach. After the laundry has been hung, the bar is raised to the desired height.
• The tubes are not lifted all at the same time, but alternately, which minimizes the load on the hands.
• The planks can be set at different heights when drying the laundry. Cascading items dry out much faster.

However, like all dryers, this design has its drawbacks. It should be noted that the disadvantages of "Liana" are primarily associated with a specific model and manufacturer of the product.

According to customer reviews, poor quality products have the following disadvantages:

• the ropes pop out of the rollers, so you need to tie these elements manually;
• plastic parts break quickly;
• in case of improper installation, the structure quickly fails.

The Liana dryer is available in two versions: ceiling and wall. When choosing a model, it is worth considering on which surface the main load will be created. Ceiling options imply a load on the ceiling covering. Tensioned and suspended structures may not support heavy weight.

When the type of cladding material is not able to withstand heavy loads, and there are no metal corners for fastening the structure, it is best to use a wall model.

The wall "Liana" differs from the ceiling model only in the way of fastening. The consoles, which will hold the entire system, in this case will be attached to the wall.

On the modern market you can find Liana dryers of various sizes. In many ways, the parameters depend on the manufacturer. The width of the product usually varies from 1.4 to 2 meters. As for the length of the tubes and the design itself, a large number of different options are possible. The most common minimum length is 1.3 m. Standard sizes also include the following: 140 cm; 150 cm; 160 cm; 170 cm; 180 cm; 190 cm; 200 cm.

For the manufacture of certain elements of the Liana dryer, manufacturers can use various materials. The quality and reliability of the structure as a whole will depend on this. The cylinders on which the laundry is placed can be made of metal or plastic. The metal tubes have a protective anti-corrosion layer.

Dryer "Liana" is a wall or ceiling structure of small dimensions, which consists of a few simple parts.

The system includes the following elements:

• one pair of metal holders with rollers;
• pipes made of metal or plastic, which act as a hanger for wet clothes;
• mounting brackets;
• ceiling or wall consoles;
• ropes (strings);
• caps.

Plastic or metal cylinders can be from 0.5 to 3 meters in length. Their number may vary. Usually there are 4-5 strips in the kit. Each tube is equipped with two ropes of different lengths. The long string goes through one roller on a special holder. Both a long and a short cord are passed through the second roller.

The entire system is attached to wall or ceiling consoles, which are a kind of basis for the entire structure. At the ends of the ropes, special caps are fixed, which allow you to raise and lower the tubes to the desired level. When installing the structure, it is important to observe the minimum permissible distance from the floor (1.2 meters), by which the cylinder can be lowered.

Despite the fact that "Liana" is considered a reliable design for drying clothes, certain models are not of the best quality. When choosing a device, you need to carefully study the characteristics of the product. The distance between the cylinders (tubes) should be quite large. Otherwise, things on adjacent planks will get tangled with each other.

The bundled tubes can be up to two meters long. It should be borne in mind that the longer the cylinders and the structure as a whole, the greater the likelihood of deformation of the dryer from the loads received during operation.

It is also important to take into account the material from which the tubes and fasteners of the structure were made. Plastic parts fail the fastest. Aluminum structures are the best option in terms of weight and reliability. Steel products create a painful load on walls or ceilings, but these dryers are the most durable.

Models of dryers "Liana" can have a different number of tubes in the set. In addition, the maximum weight of the garment that the part can withstand depends on the type of cylinder.

The quality of the dryer depends largely on the manufacturer of the product. Chinese-made designs are not durable and reliable. When buying a product from a model from China, it is better to refuse. It is worth giving preference to "Lianas" from domestic or European manufacturers.

Despite the fact that the assortment of Liana dryers is quite large, some modifications have earned special popularity. This is due to the quality of the construction.

Among the popular models are:

• Gimi Lift 160 and Gimi Lift 200;

• Luminarc Liana 1.4;
• Comfort Alumin 1.5 m and Comfort Alumin 2.5 m;
• Dogrular SP1505.

Dryers made in Italy Gimi lift have a rather high price compared to similar products from other manufacturers. The price is due to the high quality of the materials used for the manufacture and construction in general. The cylinders are made of steel, which is covered with a protective layer of epoxy powder. Regardless of the length of the tubes, the maximum load that the Gimi Lift can withstand is 12 kilograms.

Model Luminarc Liana 1.4 produced by a French company. The price of the dryer is significantly lower than the cost of Gimi brand products. However, in terms of technical indicators, Luminarc Liana 1.4 is not inferior to analogues from other manufacturers. The main material that is used for the manufacture of such a structure is steel. The Luminarc Liana 1.4 model is available with five rods. The maximum load on the dryer can be up to 12 kilograms.

Dryer made in Belarus Comfort Alumin the most common in two versions, 1.5 and 2.5 meters in size. Both models are available with 5 cylinders. The distance between the cylinders is 10 centimeters. The maximum permissible load on the structure is 10 kilograms. Such models are produced from plastic and aluminum.

Russian-made model Dogrular SP1505 designed for ceiling mounting. The weight of the structure is 2.1 kilograms, and the maximum permissible load is 10 kilograms. The dryer is made of plastic and aluminum. The model is distinguished by its attractive design, good quality and low cost.

Installing Liana is not a complicated process. To assemble the structure, it will be enough to study the assembly diagram and installation instructions, which must be indicated on the product packaging.

The following tools and accessories are required to install the dryer.

• Perforator. An electric drill is also an alternative. This tool is required to drill a small number of holes in walls or ceilings. It is necessary to drill not only the finishing layer, but also the base made of concrete or other material.
• Measuring tape and black lead pencil. The necessary measurements are taken with the help of a tape measure.With a pencil, marks are applied to the surface of the walls or ceiling for fastening the structure.
• Fasteners. Most often, they are already included with the dryer.

• Cordless screwdriver or regular screwdriver.
• Knife.
• Dowels and screws. Usually, dowels 0.5 cm in size and self-tapping screws - 0.4 cm are used.

The section of the wall or ceiling to which the structure will be fastened must be cleaned of dust and dirt. Before proceeding with the main work, you should familiarize yourself with the instructions for the selected product. Some models may have their own mounting features, which at first glance seem insignificant. However, if some installation recommendations are missed, the structure will be attached incorrectly, which can lead to a quick breakdown of the dryer.

Metal holders are applied to a wall or ceiling surface and mark with a pencil through the holes in the details. At this stage, it is important not to make a mistake with measurements: the distance between the holders should be equal to the size of the tubes. At the marked points, it is necessary to drill holes for the dowels. With the help of self-tapping screws, the ceiling or wall consoles and the control bracket are fixed.

Next, you need to distribute and pass the ropes through the roller, which is located on the right holder. The longer cord is additionally pulled through the roller on the left holder. The ends of the ropes are passed through the fastening caps on the control bracket.

The performance and service life of the dryer will depend on how well and correctly the installation of the dryer will be. Even a minor mistake during the installation process can lead to a quick breakdown of the entire structure or its individual elements.

Let's consider the most common mistakes that can occur when fastening "Liana".

• Calculation errors. It will be quite difficult to place a model of the wrong size correctly. The ropes may not be too tight or, on the contrary, may be too tight.
• Inappropriate installation location. Windows, interior or balcony doors, and cabinet doors may touch the dryer when opened.
• The quality and reliability of fixing the structure depends on the fasteners. It is important to choose the right screws of suitable sizes.

• Do not use nails to secure the structure. This method of fixing can lead to rapid loosening of the whole system.
• Using power tools with drill bits of the wrong thickness.

In the next video, you will clearly see how to install the Liana sprinkler dryer.

The Liana dryer is most often installed on balconies or loggias. In this case, the room should be glazed. In the absence of a double-glazed window, clothes during the drying process can get dirty from dust or precipitation. In winter, wet things will freeze instantly.

The dryer can also be installed in the home. Despite the fact that "Liana" is quite compact and does not take up much space, it is better to install the product in a place that is hidden from prying eyes. Often, such designs are attached to the bathroom. In rare cases, the product is installed in a dressing room, bedroom or hall.

Ceiling "Vines" are not suitable for fixing on stretch ceilings. An exception will be the presence of special fasteners in the form of metal corners on the rough finish. Also, the dryer should not interfere with the opening of cabinets, windows or interior doors.

Dryer "Liana" does not require careful maintenance. It is recommended to only periodically wipe the structure with a damp cloth to remove accumulated dust. The exception is made of plastic tubes.To prolong the life of plastic parts, they must be wiped with a dry cloth after each drying of things so that moisture does not accumulate on the surface.

If most of the structural parts break, they can be easily replaced. The shops sell separate components of the Liana dryers. Mostly cords or cylinders fail. Changing them will not be difficult without dismantling the structure itself. With proper operation and high-quality fastening, the dryer can last up to ten years.