Characteristics and features of the lining "Calm"

Fashionable design options are made with natural materials. Wood has a special value, as it is distinguished by its unique external properties and excellent performance. The most comfortable and beautiful decor is embodied with the help of wood.

The cost of natural materials is high, everyone cannot afford to buy them. The use of Shtil lining is an excellent choice from the whole variety of products on the market. What it is, and what parameters are characterized by this method of finishing, we will consider.

The lining looks like classic boards used for claddingmade from natural raw materials. Pine, cedar, birch, linden, and other wood bases are used for the manufacture of Shtil lining. This finish differs from other varieties in the absence of grooves along the edges of the panel. To connect the parts of the cladding, there are provided “tongue-and-groove” fasteners. The technology makes it possible to embody a flat and smooth surface decor with an accurate imitation of solid wood.

Lining "Calm" is a high-quality sawn timber. One finishing panel is a clean-cut, dried board with defined dimensions. The technology for the production of the board is similar to the methods of manufacturing the Euro profile. The distinctive features of the lining are a thinner profile. And during assembly, there is no parting between the panels, since there are no deepened grooves. The fastening of the panels is invisible to the eye. The material is allowed for use both in interior and exterior decoration.

Linden, alder panels are deciduous types of material. Linden, birch, aspen, oak, alder, and other options look like wooden flat panels about 70 mm wide with rounded edges and a missing shelf on the spike side. The panels are in demand due to the unique qualities of hardwoods. This wood is characterized by excellent strength and density. The panels will not lose their original appearance even under the influence of various external conditions.

These species do not rot or mold. Any hardwood materials should be treated with an antiseptic. The processed lining is suitable for cladding and the outside of buildings. Clapboard facades look presentable and amazingly beautiful.

Conifers, for example, pine, cedar, and other conifers, can also serve as the basis for the production of Shtil lining. "Calm" from Angarsk pine is the best fit for cladding rooms inside. This breed is characterized by a unique surface pattern. The panels are suitable for finishing not only the attic or veranda, but also the living room and other rooms in the house. You can diversify the design variations by coloring the wood, as well as by choosing combinations of various types.

Lining made of pine, birch or linden is an inexpensive finishing material. Cedar products are an elite grade of finishes that can only be used to decorate some interior parts of the premises.

Cedar lining is used not only for home interiors, but also for executive offices, facing bank halls, shops.

The dimensions of the "Calm" lining are different.The material of a domestic manufacturer is generally from 9 to 15 cm wide. The length of the panels is up to six meters. Variations in the thickness of the panels vary from 1.2 to 2.5 cm.The width of the foreign-made material ranges from 8 to 14 cm.The boards are thick from 1.25 to 2.1 cm.The length of the panels is the same as that of the domestic manufacturer - up to six meters.

Unlike the classic variations of the lining, "Calm" has varieties with other parameters. For example, the width of a domestic material can be from 120 mm to 140 mm, and the thickness of the profile can be from 1.5 to 2.5 cm.

The lining "Calm" of foreign production is identical to the dimensions of other types of materials. Calm is characterized by differences in the length of the finishing board. For example, it ranges from 2 meters to 6 meters. This variety allows for fewer butt joints on the cladding surface. The finish is smoother and more solid. The most widespread are the "Extra" and "Premium" classes. They belong to the higher quality species.

The appearance of wooden products differs depending on the class. Classes are divided depending on the presence of knots on 1 meter of the panel. The fewer there are, the better the quality is considered. The scope of the lining is interconnected with the type of base. For example, pine or spruce panels are suitable for cladding verandas and loggias. The structure of the needles is characterized by increased resin content, thanks to which the lining acquires good water-repellent qualities. Coniferous lining is not suitable for finishing steam rooms in saunas. Since, due to the high degree of tar content, such a lining begins to exude a pungent and unpleasant odor.

Hardwood panels do not emit resin, and therefore are allowed in the decoration of steam rooms. Such cladding will have a positive effect on the human body due to its subtle healing scent. Expensive types of wood, for example, cedar lining, can only be used for finishing small decorative elements. The highest cost panels are often made from rare wood species.

Lining "Extra" class can only be used for interior decoration. The quality of the material is very high. The class is divided into varieties: A, B, C. Here it is worth considering in more detail the nuances of choosing a particular variety, depending on the qualities of the variety. Variations on sale imply the presence of varieties with characteristics: AB, BC.

It is clear that its cost depends on the quality of wood. When choosing a lining in a store or on a sawmill, put a couple of slats of different types together, evaluate the texture of the panels. This assessment is called visual. Please note that the cheapest grade of panels is C. The price of the grade varies depending on the type of wood used in the manufacture.

The most acceptable in use and at the price of the panel is grade B. They can be used for cladding ceilings and walls. The standard working length of the panels is up to six meters. Planks of A grade of "Prima" or "Elite" class are very expensive material.

Perceptible advantages of grade A lining:

• wide panel, which allows you to sheathe the premises quite quickly, without much physical effort;
• the ability to mount both horizontally and vertically;
• the tongue-and-groove system ensures very simple installation;
• there is little waste that is inevitable when working with other varieties;
• the presence of special ventilation slots.

Differences in the appearance of the varieties:

1. A - rare knots without rot and areas with visible resin are visible;
2. B - the presence of a larger number of knots, as well as areas with visible resin;
3. C - blue is allowed in places with visible resin, knots falling out.

Decorating the inside or the facade of buildings with "Calm" clapboard is one of the inexpensive ways to transform a home. The panels are manufactured using modern technologies, which increases the performance characteristics. Some types of panels do not require any maintenance or treatment with fungicidal agents. Wood paneling is always in fashion.

Classic lining made of boards is an ecological material. It will fit well with most trendy interiors. However, if this material is used everywhere, then a kind of dacha effect arises. Therefore, the lining should be used selectively, for example, for decoration and creating fashionable accents.

• Wood panels can be present in the interior decoration of the walls, on the ceiling, in other interior details.

• The ability to paint the lining is a positive decorative advantage of this material. For example, white lining is well suited for the embodiment of a Scandinavian interior.
• Painted lining is often used for cladding facades, street elements, such as gazebos. The painted lining inside the gazebo will retain its original qualities for a long time.

• Today creature manufacturers have diversified the clapboard assortment. In addition to classic planking boards, in stores you can find good and interesting materials from the point of view of the designer. For example, the facing of the boards with an overlap imitates the lining "American".
• A block house can easily cope with imitation of a log laying.
• Choose lining options in accordance with the conceived design. As you can see, standard boards can be supplemented with other types of designs.

You will learn how to quickly attach the lining in the following video.