Discussion: what is it and how to carry it out?

One of the main tools for caring for a piece of land is disking... For the successful implementation of this procedure, certain funds and conditions will be required. To do everything right, you need to understand the essence of the disc.

Disking - this is almost the same as plowing, but only more gentle with the use of special equipment that is attached to the tractor. The procedure is performed most often in the fall, but when the soil is not yet frozen. Less often, discs are engaged in the autumn period.

Disking was especially widespread in the Soviet period. But even now the so-called moldless disc drive is carried out by both experienced and novice farmers.

The main purpose of the disclosure is to make the soil loose. But this only affects its top layer. Also, in the process of such land cultivation, weeds and crop residues (for example, potatoes or carrots) are ground, which for some reason was not completely harvested. Very often, disking is carried out in the fields after the cultivation of corn, peas or sunflowers.

Disking intended for surface soil care. It allows you to loosen the top layers of the soil to a depth of about 10-15 cm (stubble plowing), which helps to destroy the formed soil bark, and also helps to cope with weeds and pests.

In most cases, disking carried out in the fall in order to prepare the soil for wintering.

Disking of the soil is often carried out mechanically. This will require equipment and additional equipment:

• tractor;
• harrow;
• devices designed for sharpening circular saws.

It makes no sense to talk about the varieties of the tractor, since almost any technique will do (tractor, walk-behind tractor, plow, seeders of various types), in working order.

The first thing to consider without fail: the working cavities of the harrow must be set at a certain angle. The principle is as follows: the larger the angle, the greater the depth of entry of the disc into the soil. The disc harrow can be of several varieties:

• disk;
• dental;
• needle-like;
• rotary;
• spring;
• mesh.

Disking is in progress in the usual way or on stubble... In the latter case, it is also called peeling. Regardless of the type of harrow, it connects to a tractor or other "pulling" machine.

When all the equipment necessary for the procedure is completely ready and in good condition, you can go to disking. If the soil you want to cultivate is very dense, then it is better to opt for a disc or tine harrow. It is impractical to use lighter harrows. Rather, they are suitable for sowing work.

The essence of the disking procedure is as follows - a harrow is attached to a tractor or other equipment, and in this form it gradually begins to cultivate the required area of ​​soil. If once is not enough (this can be determined not only by the appearance, but also by the condition of the soil), it is better to process the field again.

In most cases, individuals do not have expensive equipment that can be used for soil disking. This is why people have to seek services from specialized agricultural companies.

The cost depends on several factors:

• plot size;
• the shape of the land plot (the convenience or, conversely, the inconvenience of the work depends on this indicator);
• cleanliness of the site;
• soil moisture level.

The price also depends on the status of the contractor company... But on average, prices are kept at the level of 600-1000 rubles per hectare.

Disking will be difficult in some conditions. To avoid undesirable results, as well as equipment breakdown, important points must be considered before starting.

1. Preliminarily remove all debris from the treated area. These can be scraps of hose, small pieces of film, paper, bricks, and more.
2. Wait for the established dry weather. Damp soil is extremely difficult to cultivate because it will stick to the harrow. If the weather was dry for a long time, then such virgin soil is also difficult to pierce, since it has become very tough.
3. Sharpen discs.
4. Check the serviceability of the equipment.
5. Prepare the required amount of gasoline for refueling equipment (for this you need to find out the fuel consumption).
6. Decide on the depth of soil cultivation.

If all the conditions are met, then you can safely proceed to carry out agrotechnical works. It may be necessary to carry out disking in two tracks - that is, to process the soil more than once.

As already mentioned, a wide variety of tractors can be used for disking. The main thing that the technique had a special harrow mount.

But the quality of tillage depends on the harrow or on the cultivator. Therefore, it is better to consider the choice of this technique thoroughly. The most common and qualitative model is cultivator "LDG 10". This model has gained great popularity in the Russian Federation and the CIS countries. The advantages of the model are obvious:

• relatively low cost;
• simplicity of design;
• ease of use.

It can be hitched to almost any tractor, even with low power.

The cultivator consists of several parts: frame, working sections, overlapping disk battery and rods mounted on carriages. Another indisputable advantage of technology is the ability to quickly move from the transport position to the working position.

Disking improves the general condition of the soil, as well as facilitates its subsequent processing.

You can find out how to properly disc the soil in the next video.