All About Carbon Fiber Heating Cables

Knowing everything about carbon fiber heating cables is essential for any zealous owner. Having a clear understanding of what carbon fiber heating wires are and why this type of heating element is needed, it will be possible to make the right choice. Attention should also be paid to the manufacturers of such equipment.

The carbon fiber heating cable is one of the characteristic components of underfloor heating. The principle of operation is very simple. As soon as the electric current is turned on, and it begins to flow to the wire, the resistance of this element leads to the appearance of a large amount of heat. But according to the laws of physics, heat cannot remain in a closed volume - it begins to spread. The heat flux is transferred by a contact method to the floor surface, then the heat enters the air in the room.

However, the problem is that it is almost impossible to influence the resistance. It also fails to adjust the length of the resistance level. The two-stage transfer of thermal energy significantly increases the current consumption. In addition, you will have to wait a long time for the air in the room to warm up from scratch.

It should be understood that this approach is not entirely convenient. It allows you to get only blocks of exactly the same size. Docking can be difficult due to the impossibility of completely stacking a whole number of panels in a given volume. If you use carbon fiber instead of traditional electric wire, both problems are solved effectively. Carbon rods have a very high resistance, when the current passes, radiation is generated from 5 to 20 microns.

As a result, the energy will not be transferred to the air itself, but to people and various objects. Adding graphite and silver elements to the design will help increase efficiency. You can adjust the temperature using polymer inserts. As soon as the air warms up to 18-22 degrees, the resistance increases. The current will be reduced, and accordingly the rod becomes colder.

The use of carbon wire for heating is widely practiced. This solution is appropriate for residential and non-residential premises. Common examples are:

• brooders;
• incubators;
• aquariums;
• insectaries;
• terrariums;
• other objects of economic and farm profile.

Regardless of the specific type and brand of cables, strict safety standards apply. However, this also applies to infrared films and rod devices. Attention should be paid to compliance with electrical protection standards. Ideally, the heating wire should be equipped with a special mesh, which also has to be grounded.

There are no other special requirements. The main thing is to choose the right power for a particular product. To equip incubators, such a property of carbon fiber as the ability to provide uniform heating, to exclude jerks and drops, is important. It has no thermal inertia. Therefore, warming up occurs quickly, but there is no danger of harming the bird.

It is also worth noting:

• compatibility with any thermostats;
• the ability to obtain arbitrary power by varying the length and number of sections;
• ease of installation;
• kink resistance;
• compatibility with any power sources (voltage 12 or 220 V - does not matter).

Experts advise:

• make connections only with high-quality clamps;
• avoid overloading the heating cord (maximum 15 W per 1 m);
• carry out the initial start-up under control, monitoring the condition of the braid;
• refuse to wind the cord on uninsulated steel objects.

As long as these guidelines are followed, carbon fiber cable can be placed under any material in any room. It is allowed to install it inside the wall. The service life of such a solution is much longer than that of metal structures. Rather, the thermal regulator or temperature sensor will fail.

Good products are supplied by firms:

• "Elemag";
• Stem Energy;
• "M-Carbo".

For information on how to calculate the wattage of a carbon fiber cable, see the video below.