Types of fertilizers for conifers and their application

Content
  1. How to understand that conifers lack fertilizers?
  2. Types of dressings
  3. Terms of introduction
  4. How to feed properly?

Conifers stand out from the rest with their appearance and smell. Even in winter, these crops continue to delight the eye with their green color. For splendor and rich appearance, they need top dressing not only in summer, but also in winter. In today's article we will look at what types of fertilizers are for conifers and how to apply them.

How to understand that conifers lack fertilizers?

By the appearance of the described plants, you can immediately understand that something is wrong with it. The lack of minerals immediately catches the eye even of a person far from gardening. Even a lack of nitrogen in the ground can affect the appearance of the plant. Because of this, growth slows down, the trunk does not develop in width. The branches will be very sparse, and the color will not be as bright. If the level of phosphorus in the soil is too low, then the overall picture will be different. The seedling develops slowly, its branches are too short, and in some cases they can curl. The color of the tips varies from yellow to burgundy.

If there is not enough potassium, then the color of the described plant becomes pale. Yellowness may be present. The tips of the branches will become very brittle and begin to die off after a while.

For a good photosynthesis process, conifers need magnesium. If the content of this chemical element is insufficient, then the plant will turn yellow, and after a few years the color will be golden. The appearance of such a culture may seem perishing.

Lack of calcium also harms this type of plant. Excess resin will be released on the branches and trunk, most of all at the base of the buds. After a while, the upper part of the seedling will begin to die off. With a lack of this substance, the branches hardly develop and can be very short. The most destructive for needles is the lack of boron. If this happens, then this plant will not be able to survive drought or severe frosts.

Types of dressings

For coniferous plant species, it is best to use the following types of highly effective dressings:

  • biohumus;
  • complex fertilizers;
  • mulch;
  • compost.

These fertilizers are best applied in the spring.

Mineral

According to the rules, they are used for spring feeding. The best option for this would be the introduction of a special complex fertilizer. Any formulation that contains potassium and magnesium can be used. These substances are necessary for the described tree species for a good photosynthesis process. The use of potassium sulfate is allowed.

Favorite by many gardeners and gardeners, urea is not suitable for conifers. While ash will always be relevant to this popular culture. It is rich in minerals that wood needs so much. If the acidity level of the soil is too high, then dolomite flour can be used. It contains a large amount of potassium, which tends to alkalize the earth. It is important not to overdo it with the use of this substance, since the substrate for conifers should be slightly acidic.

Organic

Among this type of fertilizer, compost is considered the best and most nutritious. Almost every gardener prepares it, so the quality of the mixture is always quite high. You can replace compost with vermicompost, which looks like an organic substance.processed by worms, microorganisms and rain. It is better not to use manure. There is too much nitrogen in it, with an excess of it, the composition can negatively affect the seedlings.It can be replaced with a ready-made nitrogen fertilizer, the rate of which can be calculated for each seedling.

Herbal infusions are also not suitable for conifers. Such a popular folk remedy is best used for other types of horticultural crops that require rapid growth.

In conifers, there is no need to build a new crown every year, so it does not need an excess of nitrogen.

Special additives

To facilitate the process of calculating fertilizers for coniferous tree species, special additives have been developed:

  • "Health turbo for conifers";
  • "Khvoinka";
  • Green Needle;
  • Fertika Lux;
  • "Fertile universal".

Let's take a closer look at the features and distinctive characteristics of each of these popular fertilizers.

  • "Health turbo for conifers" Is a good and effective option for spring fertilization. It contains a large number of trace elements, among which magnesium is present. The nitrogen content is 22%. It is undesirable to exceed the dosage of this mixture. It is highly discouraged to use it as an autumn form of feeding.
  • "Khvoinka" considered a good supplement for evergreen seedlings. You need to bring in in the spring and summer. The nitrogen content of this fertilizer is 13%.
  • "Green Needle" - This is a good fertilizer for conifers, which must be used in the autumn. The high concentration of magnesium and sulfur paints the needles in a bright saturated color that does not change all year round. This top dressing helps to prevent yellowing of the needles. The low nitrogen content of 3.4% makes it safe for all types of conifers.
  • "Ferlika suite" used mainly by amateurs. It should be noted that there is no magnesium in its composition, and the nitrogen content is 16%. This mixture can be used in a diluted state and no more than once every 3-5 years.
  • "Fertile universal" fertilizers are applied in the fall for the growth of new shoots. You need to finish its application no later than August. Among the traditional substances, potassium magnesium is suitable for conifers. To maintain your plant in a healthy and beautiful state, it is undesirable to use a large amount of dressings. The main thing is not to overdo it with nitrogen. When caring for the described tree species, it is necessary to focus on potassium and magnesium.

Terms of introduction

Fertilizing conifers is not a very simple procedure and requires certain knowledge and skills from the gardener. It is worth noting the fact that if the seedling was grown for 5-7 years correctly, with the necessary fertilizers and other subtleties, then upon reaching this age, the need for additional compositions disappears. Such a tree will grow beautiful and healthy. The introduction of different formulations is carried out at different times of the year.

    In the spring, after the snow melts on the ground, you need to scatter a granular substance called "Vitolizer" around the root zone. This is to prevent yellowing.

    In addition, in the same time period, after the soil warms up to a temperature of +8 degrees C, you can fertilize conifers with "Zircon". The solution is prepared at the rate of 1 liter per bucket of water. In addition, the whole culture is sprayed with this substance. To do this, the composition of the solution should not be stronger than 5 ml per bucket of water. The procedure must be repeated after a week. If the needles are completely yellow, then 4 such events will be required with an interval of 10 days. If the needles are crumbling, then we continue the described procedure throughout the summer. During the spring and all summer, the following preparations are allowed:

    • Pokon - a preparation that prevents the crown from turning brown;
    • "Florovit" - this substance will prevent the needles from turning brown;
    • The Green Needle.

    If necessary, Florovit can be exchanged for Siliplant. In addition, you can make feed from potassium magnesium in the amount of 40 g per 1 sq. m. Summer make-up is applied at the end of May to the end of August, in the southern regions until the end of September. Spraying and watering should take place every month.For the correct dilution of the concentrate, follow the instructions on the package. The list of substances used in the summer is quite extensive:

    • "Kristalon";
    • Agricola;
    • "Aquarin";
    • "Zdraven";
    • Florovit;
    • MicroMix;
    • Fertika is a summer for evergreens.

    How to feed properly?

    To begin with, we need to loosen the near-trunk soil at a depth of about 10 cm. Remember that the roots of conifers are very close to the surface, so you need to act carefully and carefully. The diameter of the circle depends on the age and size of the particular tree. When everything is ready, you can feed the plant by applying fertilizer. If compost is used, then it must be scattered evenly in a small layer of 5-10 cm and mixed with the ground. The average amount of the described fertilizer per 1 sq. m is 3-5 kg. Mineral fertilizers such as vermicompost must be dissolved in water. Dilution instructions are on the packaging. After preparing the nutrient mixture, watered the soil around the trunk.

    One of the options for fertilizing coniferous horticultural crops is sprinkling with granular fertilizers. They are scattered over the entire surface of the root circle and mixed with the ground.

    It should be borne in mind that this method is less labor-intensive, but the fertilizer is absorbed much longer.

            When everything is done, then further it is necessary to mulch the soil. This process is essential when planting a new tree. Sawdust, wood chips or chopped bark are good for this. It is desirable that the mulch layer is not less than 4 cm. The covered soil will not only create a decorative effect, but also protect the soil from drying out and drown out a large number of weeds.

            Trace elements and growth stimulants can be introduced, only not by root and only in liquid form. You can use a regular garden sprayer to do this. You need to spray the plant no more than 2-3 times with a break of 10 days. If the weather is very dry, the spraying interval can be shortened to 1 day.

            See below for tips on feeding conifers.

            no comments

            The comment was sent successfully.

            Kitchen

            Bedroom

            Furniture