Alcaplast wall-hung toilet installation installation

Wall-hung toilet bowls Alcaplast have many advantages: they save free space, look original, and besides, they are an excellent option for a small-sized bathtub. However, the installation of this plumbing should be carried out according to the established scheme - the success and duration of the equipment operation depends on it.

The most economical and affordable option is the Alcaplast installation. Due to its compactness, it is able to organically fit into any small area. It is a frame system that is placed on a foundation or floor and then securely attached to the base and wall.

Thanks to the height adjustment by means of the legs, the structure can be fixed in any place (a corner option is also provided). In addition, virtually all modern models of toilets correspond to it. In this case, it is recommended to place the plumbing next to the load-bearing wall. The floor must have a screed thickness of 200 mm.

The main advantages of products from the Czech Republic:

• saving space in the toilet room;
• hygiene (due to the convenience of cleaning under the mounted model);
• installation at the optimum height;
• high quality parts;
• pleasant appearance (due to the fact that communications are hidden).

Of the minuses, they stand out: the need to dismantle when replacing, a rather complicated installation process.

When purchasing products from this manufacturer, there is always the possibility of connecting additional plumbing: next to the toilet, you can install a bidet or a hygienic shower with a mixer, because the design includes adapters for connecting other water sources. If the frame has a socket for a power outlet, this allows an electronically controlled bidet to be installed.

The Alcaplast installation is a budget, lightweight and compact model that can be purchased with the toilet.

The manufacturer's kit contains the following elements:

• installation system;
• gypsum boards for sound insulation;
• sleek and hygienic cantilever toilet without a rim;
• seats with a lift device providing smooth lowering;
• white button.

The system is supplemented with a two-stage drain mode (large and small). The products are guaranteed for up to 5 years of use.

Other Alca products, such as the A100 / 1000 Alcamodul, are available with no floor anchors at all. In such cases, the entire load - both of the structure and the person - falls on the wall, therefore, brickwork or a partition with a thickness of at least 200 mm is preferable.

During the installation process, you will need tools such as a level, a construction knife, union keys and for threaded connections, a measuring tape.

Also, the elements of the structure must be prepared for work:

• frame installation;
• toilet bowl;
• nozzles of different sizes;
• double flush plate;
• mounting studs.

All work is carried out according to the established scheme.

• First, you need to form a niche in which the frame will be placed. It is made in a load-bearing wall and provides for a load of up to 400 kg.The dimensions of the niche are 1000x600 mm, its depth can vary from 150 to 200 mm.
• At the second stage, a sewer is brought to the location of the hidden system. A pipe with a diameter of 100 mm is laid as close to the floor as possible at the correct slope. A steel oblique bend is put on its horizontal part. The connection point must be 250 mm from the center of the niche.
• Next, the frame is mounted, fixing its legs on the floor, it is fixed to the wall using brackets. It is extremely important to check the alignment of the structure with a level, since distortions can affect the operation of the internal device, and this will lead to system malfunctions and breakdowns.

• It is advisable to tie the legs with cement mortar with a layer of 15-20 cm for stability. In order to hang plumbing, special holes are provided in the lower section of the structure. A distance of 400 mm is maintained between them and the floor surface. Through this perforation, mounting spokes are inserted and fixed in the wall with nuts - later on, the toilet bowl is hung on them.
• The last thing is the connection to the sewer pipes. A special outlet in the installation system is connected to the communication on one side, and the other is tightly fixed to the frame, for which a threaded connection and sealing gaskets are used to avoid leakage. It is also recommended to supply polypropylene or copper pipes to the tank, which are much more practical and durable than flexible hoses.

After that, tests are carried out on the performance of the system and possible leaks. It is necessary to open the tap inside the barrel, and as it fills, identify the presence or absence of problems. If no errors are found, a button is installed for installation: pneumatic or mechanical. The pneumatic key is connected using special tubes. The mechanical model is installed after installing the pins and adjusting their position. Both operations are straightforward, since there is a hole and corresponding connections.

For information on how to install an installation for a wall-hung toilet, see the following video.