Toilet bowls "Keramin": an overview of the range

The choice of a toilet bowl should be approached with all responsibility, because it must combine modern design, quality and functionality. At first glance, everything is extremely simple, but in fact there are a lot of toilet models today, and you only need to choose one. Among the whole variety of models, it is worth paying special attention to Keramin toilets.

The Belarusian plant "Stroyfarfor" and specialists from Italy have created modern high-quality toilet bowls. Keramin sanitary ware is manufactured according to the newest technologies using innovative equipment and high quality materials. Products comply with various international standards, as well as GOSTs. Keramin toilets are covered with reliable enamel, which has no irregularities or foreign inclusions.

The model range of Keramin products is very wide. At the same time, the products are presented in various colors and ergonomic designs. Plumbing is designed to fit perfectly in any bathroom or washroom.

Among the advantages of Keramin toilets, it is worth noting functionality, quality, durability, stylish appearance. They are a real example of European quality.

In all Keramin model lines, the device of toilets has become simpler, but has not lost its functionality at all. Fittings are included in the toilet cistern device. It allows water to flow into an empty tank and also allows water to be shut off when the tank is full.

If we consider the structure of the tank in more detail, then the main details of the product are visible.

• The filling valve is equipped with a plastic rocker and together they dose the water in the tank.
• The flush mechanism, after pressing the button, sends part of the water from the tank directly to the toilet. Water draining can be single or dual mode. The water is evenly distributed, allowing you to achieve better cleanliness through a system of channels throughout the toilet.
• The drain fittings allow you to save the tank if an emergency discharge of water is carried out. This can happen if the intake fittings fail.

• Overflow prevents the reservoir from overflowing with water. It is combined with a drain mechanism. Also, the water level is adjusted with a red plastic screw.
• The filter extends the service life of the inlet fittings. And here the quality of the filter is very important.
• The float is the simplest indicator. With the help of a plastic fastener, it completely blocks the inlet from which the water comes. In some models of Keramin toilets, the float may not move on the rocker, but along the vertical axis.

The model range of Keramin toilets is very diverse. To better understand how wide it is, it is worth taking a closer look at the most popular models.

• "Leader" are distinguished by soft lines and clear edges. The modern style of the model is complemented by floor mounting, oblique outlet, circular flush and flush with stop function.
• "City" will be a godsend for those who love timeless classics. City toilets are equipped with oblique outlet, circular flush, dual-mode flush and padded seat.
• "Grandee" combines practicality, quality and affordable price. The outlet in this model is horizontal, circular flush, single-mode drain with stop-function, hard seat.

• "Milan" easy to recognize by the integrity of the shape and lines. The design has the most original feature in the form of a rimless bowl, which improves hygiene. Models are floor-mounted, dual-mode drain, hard seats and horizontal outlet.
• "Geneva" combines smooth lines and perfect shapes. The toilet bowls of this model are distinguished by a universal release, a shower flush, and a flexible extension. They also feature floor mounting and a rigid seat.
• "Palermo" will provide pleasant comfort and special hygiene. The floor-standing toilets of the collection are equipped with an oblique outlet, a circular flush, a single-mode flush and a hard seat.

• Bergamo recognizable by strict forms and simple harmony. The model is equipped with a universal outlet and a dual-mode drain. Floor mounting is carried out with concealed fixing.
• "Vita" Is an ideal economical, practical and comfortable option. The model with a soft polypropylene seat is fixed to the floor. This toilet is characterized by an oblique release and a dual-mode drain.
• "Style" discovers practicality, beauty, coziness and comfort. The model is characterized by suspended installation, horizontal outlet, circular flush, water supply installation system.

• "Verona" exudes Italian charm. The model also features horizontal outlet, floor mounting, bottom water inlet, circular flush, single-mode flush and hard seat.
• "Arctic" in the Scandinavian style is always relevant. The Arctic is characterized by a horizontal outlet, a shower drain and a dual-mode flush. A nice addition is the flexible extension cord.
• "Quadro" reflects the best ideas of designers. The original geometric shapes are visible in this model.

When choosing toilets, experts advise to think over the criteria in advance by which the choice will be made. It is worth considering how the toilet will be installed, what bowl it will have, how it will be connected to the sewer, as well as the desired design and color.

The first thing that is advised to start choosing a toilet is to determine how it will be installed in the room. Most often, there are floor-standing toilets that are simply attached to the floor by means of fasteners. It is very easy to install such models.

The next parameter for choosing toilets is the type of bowl. In models where the bowls have a visor, the water drains more slowly. As a result, there are no splashes or unpleasant odors. Funnel-like bowls are considered to be more economical in terms of water consumption and also more hygienic. In such models, the bowl is cleaned better due to the rapid drainage of the water.

According to the location of the sewer pipe to which the toilet is planned to be connected, there are also various model options. Most often, the choice falls on toilets with a vertical outlet. They are ideal for sewers that go into the floor. For wall drainage, models equipped with a horizontal outlet will be the best option.

There are variants of toilets in which the release is made oblique. It is convenient to connect them to sewer pipes located close to the wall. Another best option is toilets with a universal outlet, which are equally suitable for sewage in both the floor and the wall.

It is advisable, when choosing a toilet, to pay attention to its size, glossy finish, simplicity and reliability of fittings, seat fastening, flush system.

As for the design of the toilet bowls and their color scheme, today there will be no problems with the choice. There will certainly be an option that fully meets all the wishes of even the most discerning buyers.

Customer reviews of Keramin toilets are mostly positive. First of all, many people highlight their compactness. These toilets are suitable even for small washrooms. Customers are also impressed by the variety of shapes, models and wide color palette. Moreover, you can even find quite rare black colors.

The glossy finish "Keramin", in the opinion of most buyers, deserves praise. The fittings impress with their simplicity, which makes it easy to assemble and install. Flushing in toilets is good, but only if the installation has been done correctly. That is why the owners of toilet bowls are advised to contact a specialist for installation.

Somewhat upsetting is the lack of an anti-splash system, which leads to unpleasant splashes. Rarely, but still there are reviews about inaccuracies in the molding of the product and the inconvenience of attaching the seat to the toilet.

When installing a toilet, the most important thing is to attach the cistern to the shelf. This is easily accomplished with plastic bolts with washers and rubber washers. To check how strong the gaskets are and to avoid leaks, pour water on the bottom of the tank.

The inlet fittings are attached using a plumbing flexible hose (always using airtight gaskets). The toilet is attached to the floor by means of a special fastener, and the outlet pipe is connected to the sewer.

In the event that non-standard sounds are heard from the tank or there is a water leak, the toilet needs to be repaired. To more specifically determine the breakdown, you need to open the tank lid, and then drain the water. Depending on the breakdown, it is worth taking a number of actions.

• The lever should be in the optimal position. If it has shifted, then it should be installed in its original position. In the event that the traction has become unusable, then it is replaced with a new one.
• The float can admit water and descend to the bottom of the tank. In this case, you just need to replace it with a new one.
• The siphon membranes can become unusable, which also leads to leaks. If so, then it is worth replacing the siphon with a new one. It is important that the new one is the same size as the old one.

The intricacies of choosing a toilet are described in detail in the next video.