How to get rid of condensation on the toilet cistern?
The operation of plumbing fixtures in the bathroom or in the toilet is sometimes associated with quite specific problems. This concerns the accumulation of moisture on the toilet cistern. To eliminate such unpleasant phenomena, it is necessary to understand exactly what factors led to the occurrence of such inconveniences.
Causes of occurrence
Condensation on the toilet cistern contributes to the formation of a high level of humidity in the room, due to which dampness appears, as well as an unpleasant odor accumulates. Such a microclimate renders the components of plumbing equipment made of metal unusable, provoking the formation of rust and corrosion. And this is already fraught with all sorts of problems, ranging from small drips on various surfaces in the room, to the formation of leaks and other more serious breakdowns in the toilet. For residents, mold and other microorganisms will be dangerous, for which such conditions are most favorable for reproduction.
Most often, condensation forms where there is a temperature drop, and due to their properties, bathrooms and toilets are just such a room. As a rule, the temperature in the bathroom is sometimes quite high, especially in winter. And the water that produces the toilet flush is colder, it will not be difficult for it to cool the tank itself quickly enough.
There may be several reasons why excess moisture collects on the toilet.
- Frequent use of the device, due to which the water entering it cannot be heated to the optimal room temperature. In living quarters where a large family lives, they use plumbing many times more often than in apartments where one or two people live. Frequent draining of water contributes to a noticeable difference in temperature between the water from the pipeline and the temperature in the living room.
- The appearance of malfunctions in the drain system, as a result of which water with a normal temperature leaves, and the missing volume is replenished with chilled from the pipeline. Various breakdowns of shut-off valves entail providing the toilet cistern with cold water, in winter its temperature is about 3 degrees Celsius, and the room in winter warms up to a temperature exceeding 20 degrees. A difference of 15 degrees or more contributes to the accumulation of condensation on the surface of the toilet, which sweats.
- High humidity in the room. Often, a bathroom in an apartment is combined with a bathtub, where a dryer for clothes is additionally located. The presence of a damp cloth, water dripping from pipes, as well as the combination of these phenomena, significantly increase the concentration of moisture in the air. Plastic and ceramic surfaces prevent it from drying out, so they become covered with droplets.
- Faulty ventilation of the toilet room or lack of it. There are times when a special window for ventilation is tightly sealed up during repair work. This entails a failure in air circulation, and excess moisture from it condenses onto the surface of the cistern.
- Arrangement of the bathroom in such a way that in the immediate vicinity of the toilet there will be many pipes with hot water supply, heating radiators or towel dryers.
After identifying the cause that contributes to the fogging of the toilet cistern, it is necessary to take measures to combat the phenomenon of condensation.
Troubleshooting
First of all, you need to check how well the tank itself is functioning. The technology for performing such work is not particularly difficult. For this, it is necessary to observe a little how the mechanism performs its functional tasks.
When the toilet is not in use, but water still flows out of the cistern, even if it pours in a small trickle, the drain system needs to be repaired. Such a leak can be determined by the formation of a trace of water, which eventually appears inside.
To fix the problem, you will need to check every detail of the device., paying particular attention to the connecting elements and inlet fittings. If it is not possible to cope with the task on your own, it is better to use the help of a specialist who can perform both diagnostics and elimination of breakdowns. Calling a plumber is an ideal solution for users who lack knowledge and practical experience to get rid of a breakdown in plumbing. The repair will fix the problem and resolve the issue with the wet surface of the tank.
If the problem is too frequent use of the toilet, then installing a two-stage button on the mechanism can help. The latest models of plumbing devices are initially sold in this configuration. The button can be easily purchased at any building supermarket, the cost of the product is quite affordable for most consumers.
Thanks to the installation of the button, it becomes possible to drain only a certain part of the water that is contained in the toilet cistern. The button is a system that consists of two drain modes - full and partial. This feature makes it possible to save water, which is important today for most owners of apartments and houses, and also allows the incoming liquid to warm up over time. This will reduce the likelihood of moisture build-up on the surface of the toilet.
Ventilation
Sometimes the reason for the accumulation of condensation is not the mechanism of the plumbing device itself. The question may be related to other issues, such as high humidity levels. This phenomenon is often the root cause of moisture accumulation on the outer surface of the tank.
Competent arrangement of ventilation in the bathroom and toilet will help not only to get rid of fogging of various devices in these rooms, but also to optimize the microclimate throughout the home.
The first step is to resort to installing a fan with good power., which is installed in a circular slot in the wall. Now many types of ventilation devices can be easily connected to light switches in the room, so that they will carry out their work when the lighting in the bathroom is turned on. Moreover, the installation, tied to the lighting, can also be carried out in the reverse mode of the fan operation - that is, the mechanism will begin to supply fresh air when the light in the room is turned off. In light of the fact that ventilation devices still emit noise during operation, models that will work with extinguished lighting are more in demand.
In order for ventilation to help lower moisture levels and ventilate, certain door models are often installed in bathrooms and toilets, which have special grills or openings for air circulation. Such design features of the door leaves provide a free exit for humidified air from the room, which, in turn, quickly enough mixes with the general microclimate in the apartment.
It will not be superfluous to additionally clean the ventilation ducts.leading to the bathroom, air exchange in the dwelling also depends on their condition. Lack of traction will indicate that the channel is clogged.
Another factor affecting the operation of general ventilation in an apartment may be the closing of the window with some kind of material. The plug must be removed as ventilation in the bathroom is mandatory. In the first time after the acquisition of living space, this factor could simply not be paid attention to. However, it can cause a number of unpleasant phenomena in the future, among which the main ones are condensation, fungus, an unpleasant odor in the room, and corrosion of water pipes.
The hole is sometimes sealed for aesthetic reasonswhen the window for ventilation does not meet the requirements of the owners in appearance. But today there are a lot of options for beautiful ventilation grilles on sale, which will make it possible to give this mandatory component a neater look that does not attract too much attention.
How to raise the temperature of the water?
The next way that will help fight strong condensation is to increase the temperature of the liquid in the toilet bowl. This can be done by ensuring that the tank is filled with slightly warmed water. For the winter season, this technology will be very useful.
Warm fluid can be accessed into the system in the following ways:
- Purchase of a water heater that heats the liquid before it is poured into the tank.
- Insulation of the pipe through which the liquid flows. This method has a fairly affordable price, but it will require a number of works. First of all, you need to buy the insulation material with which the supply pipe is wrapped.
- Reduce the pressure with which water enters the apartment. This will slow down the filling rate of the tank, allowing the water to reach room temperature faster.
Many professionals prefer the installation of a double cistern. Although the products have recently appeared on the market, they are already in great demand, since they are considered the latest alternative development in the field of plumbing fixtures. The high cost of products is justified by its efficiency, since the toilet bowl does not "sweat" due to the peculiarities of its design.
The device is a reservoir made of plastic and a casing with an air gap. This configuration feature will help to make the difference between temperatures completely negligible, which eliminates the risk of moisture build-up on the device.
Useful Tips
In the case of a gravity drain tank, it will not work to eliminate the condensate problem by arranging ventilation or achieving a balance of water and air temperatures. The breakdown must be eliminated completely.
Many experts advise to equip the tank insulation with your own hands during the fight against condensate. This can be achieved by gluing the inner or outer walls of the tank with heat-insulating materials, and fixing it with a sealant. The tank is treated with the composition inside, including the bottom, and the insulation is glued. All joints are sealed with a sealant; after complete drying, all parts return to their places.
Air dehumidifiers that are installed indoors are effective methods of dealing with excess moisture. The device is purchased based on the degree of humidity, room area and cost.
Devices can be of two types:
- condensate;
- absorption.
In devices of the first type, the air cools down and moisture comes out in the form of condensation. The latter is made in the form of a container containing a special filler that absorbs excess moisture from the air.
How to get rid of the condensation on the toilet cistern, see the next video.
The comment was sent successfully.