Toilet installation: what is it and how to choose?

The modern plumbing fixture market is full of different models. When arranging a bathroom, it is necessary to familiarize yourself with the device of new equipment. This article tells about the installation for the toilet: what it is, and how to choose the right design.

In translation from English, the term installation literally means "hidden, embedded". A toilet installation is a device consisting of several modules. It is located in the wall and serves to fix the toilet with a cistern.

The installation holds all the elements of the toilet bowl: a drain tank, a system of water and sewer pipes, and mechanisms for fixing the toilet bowl.

The frame kit has some features.

• The drain tank is usually made of polymers. Plastic, in contrast to ceramics, has a relatively low weight. The lightweight model is easily fixed to the frame and does not create unnecessary stress. The stone product strongly affects the frame, which can lead to the untwisting of the fasteners and the collapse of the device. The tank is mounted inside the wall, so its appearance is irrelevant.
• The button for draining the cistern should be on the side. The traditional model of this device assumes the location of the lever on the lid of the container. A plumbing structure of this kind will not be able to work in a frame.
• Modern tanks are distinguished by a two-section drain: one button provides a complete drain of water, and the second drains a third of the volume. Such devices help control fluid consumption if a water meter is installed in the house.

After installing the installation, only the toilet and the flush button remain in the room - this technical solution plays an important role in freeing up the space of a small room. The toilet is suspended. To withstand such a structure, the installation is attached either to the wall only, or to the wall and floor at the same time. The fasteners are durable and can withstand a weight of up to 400 kg.

In addition to the frame system, there is an installation with block fasteners. The unit can be installed frontally to the partitions - this method is necessary if the wall in the bathroom is not load-bearing. The frame is installed using special fasteners. When mounted to a wall, the position can be adjusted with fasteners. The studs are designed to fix the frame to the floor, and the “paws” hold the structure on a vertical surface.

Suspended installation of a toilet bowl repels buyers with the illusion of unreliability. For this reason, most apartment owners prefer to install a floor-standing appliance.

To allay doubts, manufacturers highlight some of the benefits of the new installation technology.

• The ability to hide pipes allows you to give the room an aesthetic appearance. The freed up space can be decorated with mosaics or colored plaster. The application of any coating to the wall is greatly facilitated.
• The suspended structure of the toilet allows you to install water floors around the entire perimeter of the room. It is possible to adhere to a spiral pipe-laying system without using a complex structure.The lightweight system saves on materials and time in laying the floor.

• The process of laying the flooring is made easier - there is no need to cut the tiles along the contour of the toilet bowl. The fragile ceramic coating is easy to ruin, so craftsmen are advised to avoid cutting the material.
• Possibility of cleaning the entire floor surface, processing butt seams. It is necessary to maintain cleanliness in the bathroom, therefore the hanging device of the toilet is even necessary in some cases.
• The built-in waste tank makes less noise - the drainage can be reduced by placing the tank outdoors.

When installing a suspended structure, it is imperative to take into account the dimensions of the devices and the peculiarities of their fastening - the parameters of the frame or box must correspond to the plumbing fixtures. Each item requires prior measurement. Before purchasing a particular design, you must familiarize yourself with the installation and construction features.

The appearance of the installations is practically indistinguishable, but according to the method of fastening and equipment, hanging toilet bowls are divided into three categories. One of the systems is the block version. The built-in plastic tank of this design is fixed inside the metal frame. Included with this installation are fasteners for the installation of plumbing fixtures.

The structure is installed in a niche, the role of which is often played by the front wall of the toilet. A special niche is being erected in the form of a side cabinet in which blocks are laid. The system can be closed with a plasterboard wall with decorative finish. The built-in block can only be supported by the load-bearing wall - the partition cannot cope with the weight of the structure.

The advantage of this design is its low price, as well as the ability to supply a floor-standing toilet. It is important to know that the block system works only with strong reliable anchors and a competent niche device. A niche means a compartment in which a flush tank and pipes are installed. The space below the blocks must be covered with bricks in order to avoid the collapse of the structure. The installation of this system requires partial dismantling of the wall, which greatly complicates the repair process.

In most cases, craftsmen are advised to resort to a frame installation device. - the installation of this system does not require special labor costs, and the structure itself is distinguished by its strength and long service life. The frame is also made of high strength metal. The structure is fixed at four points and, if possible, is supported on the floor. The built-in waste tank is fixed with special elements.

The frame is installed on the wall or in the corner of the room. Corner design helps save space. It is suitable for attaching bidets, washbasins and urinals. Such frames differ from their counterparts in their high price and long service life, so the purchase and installation costs will pay off.

Toilet installations also differ in the type of flush plate. Drain buttons must be durable, as they will experience constant mechanical stress. The panel should have a simple and harmonious design, not stand out from the overall design of the bathroom wall.

Customers can purchase kinds of buttons from the following materials.

• Plastic. Polymers are of low cost. Such panels have become widespread in the market due to their long service life. In addition, plastic has a presentable appearance.
• Metal. Stainless steel panels are highly impact resistant. On sale you can find analogues made of black chrome steel, but the cost of such devices is quite high.
• Glass. This type of panels has a wide palette of shades and variability of textures. Glass coverings are often complemented with metal or wood inserts, adding sophistication to the device. Contrary to expectations, glass is able to withstand prolonged loads while retaining its appearance.

According to the principle of operation, the panels are divided into two-mode, "drain-stop" and contactless. The first group includes the aforementioned buttons with the ability to completely or partially drain the water in the tank. The "stop-flush" function allows you to turn off the flow of fluid at any time. Panels with both functions are easy to install as they operate without electricity. Such devices are considered to be the most reliable.

The touch buttons do not require pressing the surface - they are equipped with special sensors that react to movement. Proximity buttons require an electrical connection and a power supply. These devices are expensive, but easier to use. The design of touch screens is called futuristic - this design will be an excellent completion of a modern bathroom interior.

The main dimensions of the frame installation are the dimensions of the frame and component parts. The drain tank of any manufacturer has standard dimensions with minimal deviations.

The thickness of the plastic reaches 90 mm, and the width is 50 cm. Frame heights vary from 1020 to 1400 mm. Thanks to the supports - legs - you can change the height of the structure. It is important to know that a low system is not always a good solution, therefore any frame structure must be buried 200 mm into the base.

The truss width reaches 500 mm. The installation depth of the frame can be varied from 150 to 300 mm. The distance from the base to the middle of the sewer pipe must be at least 220 mm. Toilet fittings are spaced 180 or 230 mm apart. These indicators practically do not change regardless of the choice of the frame structure.

The block system is located at a height of 80 to 100 cm from the floor. It is customary to deepen it by 10 or 15 cm, depending on the dimensions of the structure. The blocks are attached to the wall surface in the places indicated by the manufacturer. As a rule, anchor bolts are screwed into each corner of the structure. Some samples differ in that they have an additional hole in the center.

The choice of a wall-hung toilet depends on the mounting method and design idea. A small device reaches about half a meter in length - this option is suitable for small rooms. Medium appliances are 54-60 cm.This option is the most common and is suitable for medium-sized bathrooms. For large rooms, craftsmen are advised to purchase devices with a length of 70 cm.

The width of the toilet bowl is from 300 to 400 mm. The bowl is raised to a height of 300-400 mm. When installing the structure, remember that the gap from the edge of the device to the opposite wall should not be less than 60 cm. A narrow strip of 10-25 cm remains between the toilet bowl and the adjacent wall. Raise the device from the floor by 60 cm.

A system of any kind should not be located in the far corner of a spacious room. - devices should be located within walking distance. It is important not to create unnecessary problems with movement: there is no need to block the path to the devices with furniture or mirrors. Around the toilet, you need to free 60 cm. If the size of the room allows, then you can install a bidet and urinal. When installing each structure, the growth of the tallest household must be taken into account.

In the case of a framed installation, the drain tank is installed in the upper part of the structure. In the front of the device there is a hole for connecting communications.A system of suitable piping ensures that water is supplied and discharged. Plumbing is connected to the water supply using the side holes on the tank, to which the adapter is connected. This device fits multiple slots, which allows you to change its position as needed.

Inside the tank there is a valve for supplying liquid or stopping its flow. The flexible line device provides connection of the valve with the shut-off mechanism, which is presented in the form of a float valve. In the cavity of the tank, there are also mechanisms for adjusting the drain and devices for protecting the system from excessive drainage of water. The drain outlet is connected to an additional tank socket.

The suspension system works according to the principle of the traditional version. When you press the flush button at the base of the tank, the valve rises - water leaves the tank and pours into the toilet bowl. The lever returns to its original position, and the valve is lowered under the pressure of water and its own weight. When the button is stationary, no water leakage occurs. After closing the valve and emptying the tank, the automatic tank filling device is activated.

In an empty tank, the float drops, opening the valve. Through the hole formed, water enters the tank. As the vessel fills, the beacon rises. As soon as the float reaches the critical high point, the hole closes and the flow of water stops. The plumbing is at rest until the button is pressed, after which the cycle repeats.

Dual-mode cisterns work in a similar way to a full drain system. A distinctive feature of such a system is the ability to regulate the opening of the valve. Not all water enters the bowl, but only a given part. Economical draining reduces fluid consumption.

Traditional toilet bowls and installations are susceptible to breakage. The most common problem is a tank failure. Heavy water clogs the tank valves and slows down the rate at which water flows into the bowl. Filter deposits in the inlet valve cause the fluid to take longer to fill the tank. To return the system to working condition, it is necessary to dismantle the tank and clean the valves.

Filters have a mesh structure. Over time, the cells are filled with fractions formed as a result of the interaction of the mechanism with heavy water. It is necessary to clean such a device gently with a soft brush. For these purposes, it is not necessary to purchase a special device - you can use a toothbrush. It is recommended to wash the filter several times.

A breakdown of the valve at the inlet to the tank will lead to a decrease in the intensity of water flow into the tank. In some cases, the lid may simply bend over. The position of the valve can be adjusted by applying pressure to a suitable metal lever. The connection of the float to the valve is often broken - such a system does not work smoothly. The opening of the valve must be flushed, the position of the float and the cap must be adjusted.

A rubber gasket is attached to the valve on one side. Dirt can accumulate on it, which negatively affects the circulation of water. To detach the rubber and flush it, it is necessary to loosen the valve fastener.

It is not recommended to completely disassemble the device, since the assembly scheme of the structure is rather complicated. The removed gasket is cleaned, the valve is washed. Then the system is assembled, after which the installation can be put into operation.

Loss of communication between the valves and the button leads to structural failure. In this case, the button will not start the system - the water will not drain. Failure occurs when the drain fittings malfunction. To eliminate the malfunction, it is necessary to completely dismantle the system and replace it with a new device. Instrument suppliers can assist with the installation of replacement parts.

If water flows into the bowl without stopping, but in a small stream, then the rubber gasket on the drain valve must be replaced. Old rubber is unable to seal the hole tightly, so leaks occur. During prolonged use, the valve cover can deform, which can also cause fluid to leak. To repair the damage, it is necessary to replace not only the gasket, but also the valve mechanism.

The emergency tube, designed to eliminate excess fluid, may fall over time. A change in design will cause a leak. Uncontrolled drainage of water is a signal to repair the inlet valve and float.

There are several solutions to this problem. First, you can pick up the phone. Secondly, with the help of screws, it is possible to lower the float. These measures will significantly lower the fluid level in the reservoir and normalize the system.

Most leaks can be repaired by replacing the rubber gasket. Some modern models of polymer tanks do not provide for a gasket - the inlet valve is a monolithic structure. To eliminate leaks in such a device, it is necessary to completely replace the valves.

On the modern market, you can purchase a complete set of all devices necessary for the installation of the installation. Parts are also sold separately if it becomes necessary to partially replace structural elements.

The frame installation is completed with a steel case. To install the system, clamps and adjustable mounts are purchased in the kit. Water fittings and pipes, drain systems and hoses can be purchased separately. It is important to ensure that all components can be connected without gaps.

Frame systems are distinguished by a wide range of design solutions for installations - you can, for example, purchase a model with a corner scheme. Before purchasing an installation, it is important to measure the location of the future structure - the dimensions of the module must be commensurate with the dimensions of the toilet bowl. You need to choose reliable fasteners. The ideal system is capable of supporting loads of up to 400 kg.

When purchasing an installation, you need to purchase the following tools:

• perforator - required for mounting the system to the partition;
• a set of spanner keys - must match the size of the fasteners;
• building level and tape measure;
• drills with a suitable diameter for the installation of the structure.

The speed and quality of work depends on the correct choice of tools.

Corrugation - a pipe with carved walls, is necessary if the toilet bowl is installed with the bowl offset from the axis. It helps to establish the connection of the device with a non-standard release type. The walls of such a pipe are movable, so they can take any shape without cracks on the surface. However, the wall thickness is small - the structure does not withstand aggressive environmental influences.

Also, with the help of a ribbed pipe, the toilet bowl is connected to the sewer: a small section of the corrugated pipe is connected with one end to a ceramic device through a pipe, and the opposite end of the pipe is inserted into the sewer riser. Plastic gaskets are installed at the pipe joints to prevent leaks.

The corrugation must be hidden from the eyes, since it has a very unaesthetic appearance, thin walls can be translucent. The structure is built into the wall and covered with drywall sheets. Such a pipe requires frequent checks - weak walls often leak, which can negatively affect the operation of the installation. Wizards recommend installing a special box around the system.

The water supply is connected to the tank from the top or sides. The connection diagram of the installation to the central system must be drawn up in advance. It is important to use as few pipes as possible. Experts advise not to use thin plastic pipes with flexible walls to connect the water supply to the drain tank - these components may not withstand internal pressure.

On the market of building structures, you can purchase fixtures of various configurations and installation methods. Each company is responsible for the quality of the product and can confirm the reliability of the installation with a certificate. The sites provide a rating of the best brands, and reviews are written for each model.

Company Cersanit Is a Polish company that has been manufacturing equipment since 1998. The installations of this company are notable for their good equipment - the kits contain everything you need for quick installation of the structure. These include toilets with a dual-mode flush button. In addition, each model is equipped with a seat and circle. The frame systems of this company have small dimensions, allowing you to place it in any niche.

Buyers will be attracted by the low price and ease of installation. The disadvantages include a small number of threads on the fasteners. The control panel of this system wears out quickly and sometimes blocks the water supply. The system may require the purchase of additional hardware. Some customers note that the shape of the seat does not always match the shape of the bowl.

German corporation Grohe has been on the market since 1936. It is famous for the production of strong fittings. The constructions of this company are bought not only for the arrangement of apartments, but also for installation in the premises of construction companies and shopping centers. Installations are characterized by a wide range of installation options. The sewerage can be supplied from any point of the tank, which greatly facilitates the connection of the installation with the water supply.

The continuous drain is great for quick bowl cleaning. The tank is equipped with a gasket that serves to reduce the noise of water - thanks to this device, the collection and drainage of the liquid is carried out almost silently. The structure is equipped with an insulating coating - excess moisture does not accumulate on the surface of the tank and does not destroy the surface.

The control panel is chrome-plated. Customers notice that the coating peels off over time and requires additional staining. It is not always possible to hold this event. A service window is installed on the tank - its dimensions are quite small, which makes it difficult to control the water supply. A decorative panel is included with the installation.

Geberit - a company from Switzerland. The company has 17 branches around the world. The installations of this manufacturer are suitable for people of large build. Structural elements are made of a reinforced profile. Toilet fittings are equipped with additional inserts to help fix the ceramics. The legs are zinc-plated to protect them from corrosion and to increase their lifespan.

The set includes additional water supply pipes. The frames can be mounted both on a load-bearing wall and on temporary partitions. The structures are usually painted. The company gives a guarantee for its devices for about 10 years. The drain tank has no seams, so the risk of scale build-up on the inside of the tank is minimized.

The frame height reaches 112 cm, so this design is only suitable for a device in a room with high ceilings. The choice of buttons on dashboards is generally limited. As a significant disadvantage of structures, one can note the difficulty in repairing, since monolithic tanks are difficult to disassemble and quickly eliminate the leak.

Bulgarian company Vidima differs in an affordable price. In Russia, the products of this company are in special demand, as they are characterized by low cost and high quality.The company mainly manufactures devices for residential installations. Unusual design performance gives the room a "zest". Ease of installation and operation attracts novice craftsmen.

Another company with equally accessible installations - AlcaPlast... Czech craftsmen create frame and block structures that are notable for their small dimensions.

The products of such a company are suitable for installation in small-sized bathrooms and will save space. Models are not fixed to the floor - the structure is completely suspended. For this reason, the entire load from the devices is borne by the wall. The installation cannot be mounted on lightweight partitions.

The lack of connection with the floor allows you to install the toilet at any height. It is important to understand that lightweight construction is not capable of withstanding excess stress. Such systems are suitable for people who want to save money and time.

The correct choice of installation largely depends on the location.

There are several types of structure fastening, each of which requires a special approach /

• Standard location. The seat and waste tank are fixed in the middle of the wall. This option is suitable for the design of any company and does not require detailed preliminary measurements.
• Under the window. The frame of this design should be low. The optimal fastener height is no more than 82 cm.

• Placement in the corner. This modern design requires the purchase of special fasteners. There are modules that repeat the shape of the walls conjunction. The cost of such a design will be more expensive.
• Baffles on both sides. The suspension system cannot be installed without knowing the exact dimensions of the walls. It is not always possible to correct errors with such an arrangement of devices.
• Installation in line Is an interesting solution for those wishing to combine a toilet, bidet and washbasin. The system helps to competently manage the space of the room and ensure a smooth approach to each device. Nearby, you can place a closet for storing towels or household utensils.

But if the bowl was purchased in advance, then it is important to find a suitable frame. The fasteners of the installation must match the openings of the toilet bowl. The lifting height of the hanging device can be adjusted using a movable frame. Special attention should be paid to the coating of the structure.

The armature is often covered with paint - this measure is necessary to protect the device from corrosion. Powder coating forms a durable film. Analogues quickly slide off the metal surface, and the reliability of the powder has been repeatedly tested by the masters.

When choosing an installation, you need to pay attention to the strength of the structure. The system must be stationary, because any deviation can lead to serious disruptions during operation. The pipes must not bend and the joints must be securely fixed. There should be no cracks, scratches, paint chips on the surface of the reinforcement. It is better to give preference to a system with minimal pipe bending.

The modern solution from Geberit is a wall-hung toilet with a monobloc. This design does not require an additional frame device and complex pipe routing. The installation is not wall-mounted, since all the necessary elements are already located in the toilet bowl. The design of the bowl matches the high-tech interior. The main disadvantage of the design is the high cost: the price for such a toilet bowl starts from 50 thousand rubles.

The "normal" cost of an installation varies in the region of 11-15 thousand rubles. These kits are fully equipped with all the necessary elements. Cheaper counterparts can be made from low quality materials. Reduced wear resistance shortens the life of the structure.Cheap frame metal can not withstand the load from the pipes and bend - such a structure will require immediate replacement.

Masters advise to give preference to exclusively high-quality materials, since such an installation will last a long time, and partial leaks can be easily eliminated. Major repairs will not be required for many years, and the dismantling of some components will not require a large investment.

Installation of the installation begins with the rough work. The water pipe must be brought in advance to the place of the future device of the drain tank, and the drainage must be carried out in parallel. The cross-sectional diameter of the pipe can be up to 110 mm. According to this characteristic, the dimensions of the installation pipes are selected.

The frame is placed according to a previously drawn up plan and pencil marks. Do not be afraid to draw on the wall - the structure will be hidden under a layer of drywall. The armature is attached with special pins and securely fixed. The diagram drawn up in advance must correspond to the contour of the resulting structure. A building level is used to level the system.

First, the frame is set at a low height. Then the installation is carefully lifted - the normalized height of the structure is 42-47 cm from the floor surface. The toilet is attached with temporary studs. After that, it is necessary to mount the structure into the wall using fasteners and screws. Dowels are usually included in the kit. Experts advise buying bindings with a margin.

Then you should make the connection of the pipes of the installation to the existing communications. The pipe must be strong - flexible analogs do not withstand the pressure and break. A large number of joints should be avoided. Each seam must be reinforced with plastic fasteners and windings. During operation, do not open the valve in the drain cavity.

After strengthening the joints and connecting the toilet and the cistern with the water supply and the sewerage outlet, the system must be tested: water is supplied and the filling of the tank is monitored. As soon as the float reaches the top point, the water must be drained. A properly folded bathroom should work without leaks and unnecessary sounds. After repeated tests, the veneer can be performed.

As a cladding, craftsmen are advised to use gypsum plasterboard blocks. The material must be highly moisture resistant. According to preliminary marking, slots are made in such a way that plumbing fixtures are sheathed with a coating on all sides. Some manufacturers imprint the outline of the bowl on the panels to facilitate the workflow.

On the lid of the drain tank, a restrictive cuff made of polymers and a cover for protection are installed - these devices prevent dirt from entering the tank, the lid also plays the role of insurance. After finishing, it is necessary to wait at least 10 days - during this time the glue will dry out, and a strong shell is formed, due to which the tile will not crack during operation.

The suspended toilet bowl is fixed after the topcoat has hardened. The installation of this device does not require much effort - it is enough just to pick up such pipes so that no water leakage occurs. Two branch pipes are connected from the installation to the ceramic device: the first one drains the water, and the second connects the structure with the central sewerage system.

The fixing pins, on which the bowl was previously tried on and the drain control was carried out, should be exposed from the plane of the lined wall. Before installing the bowl, it is necessary to lay a shock-absorbing layer and wrap the studs with PVC sleeves. Then the bowl and pipes are installed on the pins and screwed with nuts. After fixing the device, it is necessary to carry out several experiments with the drain.

The dashboard is mounted at the last moment. Each design has its own buttons.To install it correctly, you need to read the manufacturer's instructions - it should be easy to press.

The installation of all devices is considered to be performed correctly only if the device does not have leaks. The structure should not sag under the weight of a person. The drain buttons should carry out a smooth drainage of water, and the frame or block system should be safely hidden under the panels.

If we talk about the advantages of a suspended structure, then it is necessary to highlight some aspects.

• Compactness. Plumbing fixtures are relatively small. All dimensional parts are securely assembled and hidden. The construction takes up a small area due to the reduction of pipe turns. The built-in tank is not suspended from the ceiling and does not create unnecessary congestion.

• High quality fittings. Manufacturing companies are trying to produce reliable designs that can be used for many years. Any external or structural deviations of parts are unacceptable, because after installation it is almost impossible to make any changes to the system.
• Economical water consumption. Thanks to the dual mode, the flow rate can be controlled. Suspended structures are characterized by a high discharge head, therefore they consume less water.
• Reduced noise levels. A plastic enclosing structure and rubber gaskets isolate the cistern from the apartment owners so you can no longer hear the water flowing through the pipes. Such a device will make the bathroom more comfortable.

• Easy to clean and use. Since the piping system is hidden, it will not accumulate dust and dirt. There is no need to clean up complex communications. A wall-hung toilet makes it easier to clean your floors.

The most important disadvantage of the installation may be its high cost. Buying additional fasteners, amplifiers and props doesn't add much to the bottom line. Also, such a design is time-consuming: it is necessary to carry out many measurements, perform a careful selection of each design detail, and pay more attention to tests and experiments.

Additionally, it is worth noting the inability to carry out repairs without dismantling the partitions. - in the event of a breakdown of monolithic structures, it will be necessary to completely replace all components.

Another disadvantage may be that the hanging device will not be appropriate for every interior. Designers recommend decorating such bathrooms in a minimalist or high-tech style. Simple shapes and clear lines will suit the classics, but for a romantic style, such a solution does not always look good.

To have a complete understanding of the use of the installation in the interior, you can familiarize yourself with the following design solutions.

Simplicity and reliability. In this interior, the installation allows you to place the toilet close to the bathtub. A small and neat item does not spoil the interior. The absence of a drain tank allows you to install a window in the wall and place a flowerpot with flowers.

A wooden shelf in place of pipes not only hides communications from the eyes, but also adds coziness to the room. Brown shades can be seen throughout the interior. The greenery of flowers creates bright accents, filling the room with colors.

Heavenly motives. The main task of the designers of this bathroom was to create an atmosphere of lightness. Suspended structures greatly facilitate the task of arranging the space. The linear arrangement of the instruments helps to save space. The lack of connection between the structures and the floor creates the illusion of weightlessness - the room is filled with air and light.

The blue frames follow the contours of the instruments, creating a kind of heavenly halo. Such a frame is not just a design move.The rungs reinforce the wall to which the frame is fixed. Outwardly, these subtleties are completely imperceptible.

Wall cabinet. The frame is fixed to the floor, so it allows you to install the toilet not only on the wall. In this interior, the plumbing fixture is built into the closet - this design allows you to rationally dispose of the entire space of a small room. The advantage of the cabinet wall is the ability to place items on both sides of the structure.

The Scandinavian combination of wood paneling and gray colors creates an atmosphere of warmth and comfort. Smooth lines add elegance to the room, and dark green spots add bright colors to the room. Due to the low position of the frame, the cabinet functions as a table.

Saving space. The installation for the toilet becomes a real salvation in small-sized rooms, since it does not interfere with the approach to the shower stall, and the absence of a cistern allows you to position a zigzag towel dryer. The white tile of the toilet goes well with the wood paneling of the floor and walls.

White panels add light and space to the room, and the tiles visually expand the area of ​​the room, create harmony. The backlight reflects off the lacquered surfaces, filling the room with air.

Floral motives. Lilac color and decorative mosaic are in perfect harmony with white tiles. In such an interior, the installation is used both for fixing the toilet and for installing the sink. The owners of the apartment can clean the floors without hindrance.

A dark plain wall visually lengthens the room, and light tiles in combination with ceramic appliances make the room airy. "Floating" interior elements complement the overall picture of lightness and airiness.

See below for more details.