Iddis toilets: model range overview

When the question arises about the choice of sanitary ware for the toilet, an increasing number of consumers prefer to purchase a domestically produced Iddis toilet bowl. Working in this market segment for more than 10 years, the founder of this trademark - the company "SKL", has managed to meet the demand for its products, thanks to a combination of traditions and innovations, practicality and originality of solutions in equipment design.

Iddis designers do not try to invent something fundamentally new in the design of sanitary ware for toilets, but they try to bring each model to perfection. Maximum comfort and aesthetics - these are the criteria that the company's developers are guided by.

Therefore, all models of toilet bowls have:

• smooth, but clear lines that make the plumbing look attractive and safe (the absence of sharp corners reduces the risk of injury);
• sparkling white surface, which is convenient and easy to care for;
• compact size that allows you to install the equipment even in a small room.

In addition to traditional floor-standing toilet bowls (compact models), combined with a cistern, the company has recently been producing wall-hung models. The latter are especially convenient for small washrooms, as they can significantly save space and reliably hide all communications.

Cisterns for wall-hung toilets are built into the wall and operate almost silently, and they themselves do not interfere with cleaning the room and do not disturb the pattern of the floor covering. All this further increases the comfort when using them.

Also, Iddis toilets differ in release to the sewer system. The model range includes equipment with oblique, vertical and horizontal outlet.

All models of toilet bowls of this brand are made of sanitary porcelain, which includes white clay, quartz and feldspar.

The optimal combination of these components gives the material a high density, allowing plumbing fixtures to withstand significant mechanical stress without compromising their performance.

In this case, porcelain toilets:

• have a very low percentage of water absorption, do not absorb odors and dirt;
• have good wear resistance;
• easy to clean.

In addition, porcelain products neatly, attractively look and fit into any interior.

On top of porcelain, all branded toilets are covered with glaze, to which zircon is added, which makes the surface of the sanitary ware whiteness, shine and smoothness. In addition to the equipment itself, the Iddis toilet bowls include a two-level drainage fittings and seats.

The armature is made of impact-resistant thermoplastic (ABS plastic) with increased strength. The technical characteristics of the material make the components resistant to negative factors (exposure to water, mechanical damage, etc.) and durable.

For the manufacture of seats, in turn, duroplastic is used - a durable and pleasant to the touch material, the composition of which prevents the growth of bacteria. The seats of some models, such as Atlant, are additionally equipped with a Soft Close system.Thanks to this system, the toilet lid does not slam shut, but closes smoothly and almost silently.

Despite the fact that Iddis toilets are manufactured according to European standards, they are fully adapted to Russian conditions, so combining plumbing is not difficult.

At the same time, the use of modern technologies and control of technical characteristics at each stage of production allows the company to provide many positive characteristics.

• High quality of each piece of equipment. All models comply with GOST, which allows the manufacturer to give them a warranty of 10 to 15 years.
• Maximum functionality. Iddis developers and craftsmen carefully think over every detail, paying special attention to its practicality. As a result, there is nothing superfluous in the models, and what is, flawlessly performs its tasks.

• Convenience in installation and operation. Regardless of the model, all branded toilets are easy to install and remove as needed. Anyone can follow the instructions. In the process of using plumbing does not require special care - it is enough to wash it regularly using any cleaning agents.
• Reliability and environmental friendliness. All materials used in the manufacturing process of equipment are environmentally friendly for humans and the environment. In terms of reliability, Iddis toilets are capable of supporting significant weight. Their surface does not scratch, crack or chip off even after prolonged and intensive use.
• Affordable prices. Due to the fact that the entire production cycle of plumbing fixtures and accessories is located in the country and does not require additional investments for transportation, the company keeps prices at an acceptable level for most buyers.

The assortment of the company includes several different models of toilet bowls.

• Atlant - floor-standing equipment with bottom water supply and oblique outlet (at an angle of 45 °). Equipped with a circular flush system that allows you to completely rinse the bowl, simplifying the care of the toilet and ensuring maximum hygiene during use. Externally, the equipment of the series is a classic in a modern design. Each model harmoniously combines rounded shapes, straight lines and flat surfaces.
• Toilet compact Calipso. The model has a hidden release, which makes it the most aesthetic and greatly simplifies the installation process. Equipped with two-level fittings with individual adjustment function, Easy Fix systems on the seat and silent water intake.

• Iceberg Nova model. High-tech oval-shaped toilet bowl. The shape of the bowl prevents splashing when draining the water. The equipment itself can be easily assembled and docked with water supply and sewerage systems. The cistern of the model is equipped with an enlarged flush button, which makes its use more comfortable.
• Mirro sanitary ware - models with a horizontal exhaust system and a hidden floor mount. Equipped with a seat with Soft Close and Easy Fix systems. The latter makes it easy to remove the structure during cleaning, and then put it in place and securely fix it.
• Odyssey Nova. Wall-mounted toilet, complete with a seat made of duroplast made according to German technology. For maximum comfort of use, it is equipped with a two-level drain fittings, an oblique water outlet and an anti-splash function. Its small size allows it to be installed in a washroom of any size.

• Skif equipment - elegant sanitary ware with horizontal outlet and circular flush system. The tank is equipped with a double button that allows you to drain 3 or 6 liters of water at a time.A distinctive feature of the model is the plastic tank lid, which gives the product additional originality.
• Viking products - wall-mounted floor models with an oblique outlet and bottom water inlet. A well-thought-out design allows you to quickly install the toilet, even without the involvement of specialists.

The popularity of Iddis sanitary ware is evidenced by numerous positive customer reviews about toilets and other equipment of the brand.

Most often, consumers note the high quality of the products. Even after a long time, no stains appear on the toilets - their surface remains the same white as in the first days after purchase. In addition, despite the apparent fragility, they are quite resistant to mechanical stress (here, of course, it all depends on the force of the impact), which reduces the risk of cracking during repairs.

Also, the owners speak positively about the ease of installation of the equipment, and the hostesses - about the easy care of it.

An additional advantage of the company, consumers consider the presence of a large number of service centers for the repair and maintenance of branded plumbing.

In addition, SKL LLC, along with toilets and accessories for them, produces a wide range of other plumbing equipment, which makes it possible to select all the elements in the same style when decorating a bathroom (separate or joint).

For more information about the Iddis toilet, see the video below.