Installation for a bidet: varieties and installation

The range of plumbing items considered essential in household use is gradually expanding. Recently, it has included such a novelty as an installation for a bidet. Moreover, the developers managed to come up with a variety of versions and variants of this important device.

Lack of free space in bathrooms limited the popularity of bidets until recently. And the low demand led to the fact that trading companies almost did not need it. Only occasionally on shop windows and shelves there were similar devices that were bought only by enthusiasts. But the situation has changed, and what has remained unchanged is that the bidet is supplied, if not complete with the toilet, then it should at least "play in unison with it." This is required by the aesthetics of the room.

The installation for a bidet can be installed in a toilet in two ways: some models are placed on the floor, others are hung on the wall. The first option is more familiar, the structure is bolted to the base of the floors or is set on glue. A hardened “leg” becomes a distinctive feature of such a system - as a result, the product is difficult to distinguish from a simple toilet bowl. Built-in devices are, of course, deprived of a massive fixing part. For them, a suspension mount is used, most often masked by false walls made of plasterboard or plastic panels.

Installations for a bidet with a two-in-one function are now at the peak of their popularity. Such a solution is especially attractive for small-sized bathrooms, where literally every square millimeter has to be obtained with difficulty. The differences are relatively small: the bowl becomes more elongated, and the overall dimensions of the device inevitably grow. But compared to a couple of standalone devices, a solid space saving is still achieved. The total water consumption through the combined toilet will be higher than through a simple one.

In addition to the mechanical (plumbing) part, electronics are also located inside the combined apparatus, which coordinates its work. The water supply in the bidet is carried out using special nozzles located either on the fittings at the rim, or inside the side of the bowl. When the bidet stops working, the fitting moves under the rim and is flush with it. If, according to the scheme, the nozzles are placed in the rim, the water supply is started simply when it is turned on. Only cold water still goes into the toilet, but for the bidet, you also need to provide hot water.

In a more sophisticated version, a bidet combined with a toilet can heat the incoming liquid on its own. In addition to the components already listed, there are sometimes hair dryers, small lifts under the seat, water regulators, pendulum devices in the nozzles.

Toilets combined with a bidet are mostly made of porcelain and faience. The increased cost of porcelain structures is justified by their strength and increased reliability. There is no risk of any deposits, crusts or ugly stains appearing on the surface. In addition to practical performance and reliability, increased attention should be paid to meeting the selected options with basic sanitary requirements.

In addition to these two materials, can also be used:

• cast iron;
• stainless steel grades;
• plastic;
• stone;
• glass.

Floor standing bidets can vary widely, but most models are 35.6 cm wide, 40 cm high and 50–54 cm deep. Suspended devices do not have any special differences, because their protruding part is mounted in the same rooms. Installations most often take 82 x 50 x 13.1 cm.If you choose a toilet with a bidet function, its size will be approximately 77 x 36 x 63 cm.

There are a huge number of options on the market, including those painted in the most unusual colors, sometimes little associated with plumbing.

The range of leading manufacturers now includes versions that can decorate the interior of a wide variety of styles:

• retro;
• high tech;
• modern;
• minimalism;
• provence.

With regard to installations, they improve the quality of the design of the space and allow you to disguise unsightly fixing details. The original step is to choose a contrasting bidet with respect to the white walls of the bathroom - bright colors or even black. Thinking over the features of the design project, it should be borne in mind that it should not degrade the reliability of the device. It is the play of colors that allows you to realize the ideas that have arisen without unnecessary problems.

Block installation is suitable only for bathrooms with solid walls. Positions for fixing the reinforcement are initially provided in the body. In frame versions, as the name implies, a steel frame is used. Half of the four anchoring points are placed on the floor, the rest on the wall. Such structures can be attached not only to the main walls; sometimes partitions are suitable for them.

The distance (height from drain to clean floor) is not regulated by any standards. For floor-standing bidets, the rim should be about 0.4 m higher than the floor. But more accurate figures can be obtained only by "trying on" a specific device. Try it, mimicking a typical application, and it will immediately become clear at what height it is convenient to place the bidet.

Brand products Geberit, which appeared earlier than others on the Russian market, continues to delight consumers with its high quality to this day. The company manufactures bidets and supplies reliable fasteners with them. The range includes floor standing and hanging devices of various sizes. Most of the products are equipped with low installations, which are the most popular. The Tece brand, which began its commercial journey back in the 1950s, knows a lot about the practical use of products.

Customers buying bidets and installations of this manufacturer note the high level of design solutions, convenience and ease of installation. Products Grohe once again confirm that the German quality is preserved even in the second decade of the 21st century. Installations supplied under this brand are distinguished by their quietness - it was achieved using the company's patented technology.

Company Vitra supplies concealed water flushing systems for 3 or 6 liters, with installation depths from 90 to 120 mm. You can also buy hanging bidet frames that are suitable for installation on plasterboard walls. Alcaplast Is an advanced Czech brand that carefully preserves its reputation. Among the latest developments of the company, it is worth noting movable knee holders, as well as devices for connecting to hygienic showers. Viega Is another German concern whose products are considered quite worthy.

All of it belongs to the elite category. Users note a well-thought-out design and minimal connection consumption. Villeroy Boch supplies almost universal installations that are ideal for attaching bidets from other manufacturers. All the necessary elements are always included in the delivery set. Cersanit Is a world-class brand. The installations sold to her can be found both in private houses and in the most reputable institutions, the quality of the materials used is no worse than that of the "grandees".

Winkel supplies high quality frame mounts for bidets and toilets. Polish engineers have succeeded in creating systems that adhere well to both main walls and partitions. Consumers note the long service life and stable use of the structures. At the same time, the cost of Eastern European products is quite sparing.

You can watch the video below about the features of installing installations for a bidet.

A bidet with a built-in installation type can look quite attractive. This is how two separate devices look like (toilet and bidet), and there are no elements spoiling the view.

And here it is clearly seen that against the background of a wall made of a dull reddish material, everything is perceived even more refined. Hanging twin bidets, thanks to a high-quality installation, turn out to be very sturdy and consistently perform their function.

And this photo shows one of the best options for the mounting frame.