Wood-effect paving slabs

Paving slabs under a tree - an original design solution that allows you to emphasize the natural landscape of the site. A variety of layout options, the design of elements in the form of boards, hemp, parquet paving stones will not leave indifferent even the most experienced summer resident. This material will help you find out how to make such a coating with your own hands, get recommendations on choosing a tile for a tree.

Wood-like paving slabs are made using the same technology as the classic versions, using the vibrocasting or vibrocompression method. An unusual appearance - with a relief, imitation of the natural cut pattern - is achieved using special shapes. A wide range of sizes, a choice of colors and decorative solutions allow each buyer to find their own version of products for landscaping.

The distinctive features of the material also include:

• non-slip surface;
• atmospheric resistance;
• practicality;
• ease of styling;
• wear resistance;
• dyeing in bulk;
• functionality.

There are several types of paving stones at once, which are produced in a "wood-like" design. The general condition here is a natural imitation of the texture of the material, whether it be a saw cut from a tree or the butt of a bar. You can find patinated options with a vintage effect or painted to look like parquet. There are the most popular design options.

• "Hemp". Such a tile perfectly imitates the saw cut formed at the end of the log. It even has "bark" along the edges with natural relief. Such paths laid in a sandy base look especially stylish.

• "Piece board". It is made in the form of rectangular modules measuring 135 × 400 mm, the outer side is decorated in a vintage style. This is a great option for covering a terrace or gazebo area, a good solution for a patio. By stacking the modules in a row, you can provide a beautiful design for the path.

• "Planks". Tiles in a square format with a side size of 460 mm. The obverse is divided into 3 parallel segments. This tile is easy to cut into separate pieces along the lines, it is distinguished by its functionality, it looks natural.

• "The ends of the timber". Tiles of a square format in the form of side cuts of the material. Follows the natural relief and cuts of wood. Such styling looks presentable in the adjoining territories, sites of the correct shape.

When laying tiles under a tree on the sidewalk or local area with your own hands, you should pay attention to the various options for its layout. The most popular are geometrically correct ones - using a horizontal or vertical arrangement of modules. In addition, the layouts look interesting:

• diagonally, with trimming of the edges at the border;
• Herringbone - suitable for rectangular tiles;
• brick, a universal option for large areas;
• "Well" with half a tile in the center and 4 whole tiles around;
• chessboard, looks better in two-tone design;
• in pairs in blocks;
• rhombus.

The main difficulty in choosing paving slabs for wood is to determine the type of material. There are vibrocast and vibropressed modules on the market. The first ones delight with a variety of designs and colors, but have a smooth surface that creates a strong slip in winter. The elements are also not made very accurately, there are differences in thickness and heights, the material needs adjustment. Vibro-cast tiles are not suitable for the design of heavily loaded areas - in the places of passage of cars, equipment.

Vibro-pressed material is much stronger. It has a rough texture, which allows it to remain stable on paving stones, even in icy conditions. Such products are more expensive, but the tile has no restrictions on loads, it shows itself well in the most difficult operating conditions. It is worth paying attention to the sound emitted by the product. A dry tile when tapped is ringing, any deviations can be considered signs of a violation of production technology.