How to tie up tomatoes?

Whichever variety of tomatoes an experienced gardener chooses for planting, he knows that this plant bears abundant fruit and often breaks under the weight of its own fruits. Therefore, regardless of the variety, location and soil, any tomatoes need a garter. There are many different ways in which you can fix a tomato stem. The choice depends on the variety of the plant itself, the size of the beds and greenhouses, and even the weather conditions of the region. Each summer resident chooses the one that is suitable specifically for his site.

Before placing pegs or trellises on the beds, it is worth deciding on the timing, which depends on the type of crop being grown.

• Determinants - these are medium and low-growing tomatoes. Their trunk is lower and, accordingly, better retains ripe fruits. Some of the undersized varieties, planted in open ground, do not require a garter, and for some, a single rope is enough.

• Indeterminants Are plants that are not restricted in growth. Most often, they are chosen for planting in large greenhouses made of polycarbonate or glass, because they have higher yields. Such varieties require a tie of the stem in several places, and sometimes individual branches.

Both types of crop should be tied immediately after the planted seedlings begin to stretch upward.

But most often the owners of the garden determine it on their own. During the entire period of growth and ripening of tomatoes, the garter must be monitored and adjusted as needed.

Tying tomatoes best with artificial materials, since they do not rot and do not spread bacterial diseases to the living stem. However, not all man-made fibers are suitable for use. All materials can be conventionally divided into three main types.

The easiest and most budgetary way is garter with regular fabric ribbons... The width of such a tape should be about 5 cm so as not to cut the growing tomatoes. A cotton sheet or duvet cover cut into strips will work, but it's better to use synthetics.

Unlike cotton ribbons, which will rot in one to two seasons, these garters can last for years. Therefore, you should not rush to throw away the leaky wardrobe item, it is better to put it in the pantry, and wait for spring.

Plastic practically does not decompose and definitely does not rust, and therefore once purchased special clips can serve not even one, but several generations of gardeners. It is enough to wash them with ordinary soapy water at the end of the season and additionally disinfect them before a new one. Some people prefer to use cable ties, which are usually used to secure cables. However, unlike clips, they can almost never be used next year, they are disposable. Even if you remove such a tie without cutting, it is rather difficult to separate the teeth for the next use.

Not the best, but a fairly common choice is metal wire. A common mistake is tying plants with too thin wire or even fishing line. Such "strings" can simply cut the trunk, ruining the entire plant. If the wire is large enough for a garter, it quickly rusts and deteriorates from frequent watering.

For those who prefer to save time and are not ready to manually tie fabric ribbons near each tomato bush, special devices and structures will come to the rescue to make the task easier. This issue is especially relevant for the owners of large plots with greenhouses, and for those who are engaged in business, growing tomatoes for sale.

• Tapener or, as it is popularly called, simply a "garter" is a special device, similar to a large metal stapler or staple gun. The set includes a special white or transparent tape and metal staples. With its help, the plant is attached to a single support in literally one click on the spring handles, like a pruner. The fastening method using such an automatic device is safe for plants: the tape does not cut the trunk and is connected tightly enough so that the bush does not bend. The tapener is simple in work, even a child can handle it. The stapler is brought to the connected stem and support, wrapping them with tape. By pressing the handles until they click, the ends of the tape are fixed with a metal bracket and cut off. It turns out a neat ring that does not injure the growing stem, made in just a second.

• Clip... With the help of small plastic clips, the plant can be easily attached to the vertical rope frame. The tighter the rope is pulled, the more secure the trunk will be. Different sizes of such plastic rings allow you to choose fasteners for different varieties, differing in the thickness of the barrel.

• Hanging bracket - one more small device for fastening to a rope frame. Such a bracket, unlike clips, is attached to a horizontal rope and allows you to slightly push the overgrown bush in the right direction so that it does not obstruct other plants.

• Trellis - a wooden structure made of tall posts with a rope or even a rigid wire mesh stretched between them, to which the seedlings are attached. Such a design is placed before planting tomatoes in the ground and is used until the last harvest, allowing one plant to be fixed several times as it grows.

There are several ways to support fragile tomato stems, each with their own pros and cons. Any of them is suitable for supporting tall seedlings, regardless of whether the beds are made in a greenhouse or in an open garden.

This method is called an individual garter and is the simplest and most cost-effective, but it takes the most time. Next to each bush of seedlings planted in the ground, a small wooden stick or metal post is dug in, for example, trimming old fittings. The depth of the underground part must be at least 30-40 cm, otherwise such a peg will simply fall under the weight of ripe tomatoes.

The trunk itself is tied to a peg with a cloth, wire, or attached with special clips and ties. When the garter is tied, the fabric is twisted with a figure eight for better fixation.

Thus, of the advantages, one can note the simplicity and cheapness of such a garter. The downside is that the growth of plants will have to be monitored daily in order to move the screeds or ribbons in time. Moreover, such a support is not very reliable, so a bountiful harvest may not at all please the owner if it buries both a wooden peg and a broken bush under it.

This method is more difficult than single supports, but also more reliable. It consists of the following.

• At the stage of preparing the garden for planting tomatoes rows of supports are formed near each bed of tall wooden or metal sticks.

• Single or braided ropes are pulled between the supports. In the second case, it will be much more convenient to use such a tapestry, but it will take many times more time and skills to create it, since the frame should be stretched rather tightly.

• When the tomato stem reaches the first rope, it is simply laid on one side and left to grow further, hanging down.

• After a few days, when the sprout reaches the second rope, it is shifted again, changing sides.

Thus, the tomato stem, like a basket vine, wraps around the rope support and does not bend under the weight of the fruit.

When the horizontal rope is pulled only along the upper edge of the supports, an individual "leash" descends from it to each bush, which will braid the green stem as it grows.

Such a garter differs from a trellis in that the net to which the bushes and the stem are tied is not woven from ropes, but from wood or metal. Rigid frame construction is more reliable and durable. If you use an iron grate, then there is no need to remove it from the garden even in winter, the metal will easily tolerate any frost and snowfall if it is securely fixed on pegs dug into the ground.

Of course, buying or building a large shield is much more expensive than buying cable ties and wooden pegs. Attaching such a frame to the supports is also more difficult than just pulling the string. In addition, picking ripe tomatoes from such a bed is somewhat more difficult, you cannot move the cells of the iron mesh with your hands. But this method is often used in large greenhouse farms as the most reliable one, which does not require updating for a long time.

Experienced summer residents who have grown more than one large harvest, unlike beginners in the gardening business, know many tricks that save not only money, but also energy. For example, cloth ribbons do not have to be thrown away at the end of the season. They can be thoroughly washed and disinfected to be reused next year.

The knot of wire or fabric strip should not pull the stem tightly against the support, otherwise it will not have enough room to grow.

When choosing stakes for a garter, it is important to take into account not the height of the seedlings, but the planned height of an adult tomato. It is better to take a support with a margin, if the season turns out to be warm and wet enough, then the bush can even outgrow its usual indicators.

In large greenhouses, special borders are necessarily made between parallel rows of seedlings. This will not only create a neat appearance, but also prevent the soil from "creeping" from the beds. And besides, it is easier to handle such fenced areas. Experts advise planting basil near such borders, which enhances and reveals the taste of ripe tomatoes, making them even more appetizing.