Processing tomatoes with boric acid and iodine

A plant such as a tomato requires regular and high-quality processing and feeding. For this, it is quite possible to use iodine and boron, which can provide your tomatoes with many of the elements they need. We will tell you how to properly process and feed the plant with these means in the article.

Iodine and boron are trace elements that are necessary for many cultivated plants growing both in the greenhouse and in the open field. Their deficiency affects the state of the plantings and their roots not in the best way. This can reduce their immunity, which is why plants, especially young ones, become more susceptible to attacks by parasites and various diseases. In addition, in adult plantings, fruiting worsens or stops altogether. Plants begin to develop more and more slowly, dead necrotic areas may appear on their foliage, as with a burn, and young tomato seedlings with a deficiency look thin and weakened.

The use of iodine and boric acid in combination can increase the growth and fruiting activity of tomatoes. In addition, these substances, perfectly harmonizing in a pair, improve nitrogen metabolism in the plant, contribute to an active increase in its green mass, increase the immunity of tomatoes, which makes them more resistant to various diseases.

Processing tomatoes with iodine and boric acid has practically no drawbacks. It is harmless to humans and, if used correctly, to plants.

If there is an excess of iodine, then the green mass will begin to grow too actively, which will have a negative effect on fruiting - the fruits will begin to deform and become smaller.

Spraying tomatoes with cold liquid can also cause problems. The temperature of the solution for processing must reach at least +24 degrees.

At the same time, spraying should take place in the evening when the sun goes down, otherwise the plant risks getting a sunburn, which will not in the best way affect its condition. Before processing, the plant must be provided with a sufficient amount of moisture.

Do not forget that iodine and boric acid are just a good and necessary supplement. But do not discount the importance of basic fertilizers, which must be applied 3 times during the entire season to provide plants with sufficient nutrients. The composition of such fertilizers should include urea, potassium and superphosphate.

It is recommended to feed tomatoes with these agents when planting seedlings, as well as during the period of flowering and the emergence of fruits. During these phases, the plant, more than ever, needs additional trace elements.

In addition, it is necessary to use solutions based on iodine and boron in a number of other cases.

So, they should be used if the tomatoes have slowed down their growth, due to sharp temperature jumps, if the fruits begin to rot and die off, or if the plant has symptoms indicating that the plant is affected by a disease such as late blight or infectious anthracnose. The solution is also necessary if dark depressed spots begin to form on the fruits when the plant is affected by white spot, because of which its foliage can begin to dry and curl.

Boron and iodine can also help combat gray mold plaque that forms on plant stems from powdery mildew, mosaic virus, apical rot, or the pathogenic fungus septoria.

In general, these substances have no contraindications. However, you should not abuse their use, otherwise it will noticeably affect the plant: its leaves will begin to turn yellow, curl around the edges, dry and die, which can subsequently lead to the death of the planting. It is best to use these funds in the aforementioned phases of tomato development, as well as in specific cases associated with diseases or weak plantings.

Therefore, it is recommended to establish the exact reason for the planting state, and only then apply top dressing with iodine or boron, or, conversely, stop using them.

This solution is absolutely safe for plants, and its use contributes to the rapid assimilation of the necessary substances that are in the soil, improves the quality of tomatoes, increases fruiting and increases the activity of gaining green mass.

For preparation, you will need 5 liters of water, a liter of whey, 15 drops of iodine and a tablespoon of boric acid.

First, you need to mix water and milk whey, then heat it up, increasing the temperature to +60 degrees. The mixture should cool slightly, after which you can add iodine and boron.

It is necessary to spray the plants with this mixture in the evening at intervals of 2 weeks. It is recommended to start doing this in the phase of formation of the first flower brushes.

In addition to whey, you can also use kefir or ordinary milk. Solutions based on milk fertilizers can provide the plant with protection from late blight and fungus, as well as scare off many harmful insects.

Ash is another useful component in solutions that will supply plants with the necessary amount of trace elements and minerals. In addition, it, being a natural alkali, will be able to eliminate all harmful microorganisms. In combination with boric acid and iodine, this substance will have a beneficial effect on planting.

For the solution, you need 3 liters of water and a glass of ash. The whole mixture should be infused for about 2 days, after which it must be thoroughly filtered.

Separately mix 15 grams of boron and 250 milliliters of warm water, then add to the liquid with wood ash. All this needs to be stirred and 15 drops of iodine added to the liquid. It is necessary to spray the plants with the ready-made solution, it is advisable to do this from the beginning of their growing season at intervals of 2 weeks.

Potassium permanganate in combination with iodine will be able to stop the spread and development of infections on the plant, in addition, these substances can scare off most harmful insects, as well as supply the plant with magnesium and potassium, which will have a beneficial effect on their development.

For the solution, you need 10 liters of heated water, a tablespoon of boron and a gram of manganese. All components must be mixed well, cooled, after which you need to add 20 drops of iodine and 3 tablespoons of granulated sugar. The processing of plantings must be carried out before the flower ovaries begin to form, with an interval of 2 weeks.

Therefore, it is necessary to process the underside of tomato leaves with particular care.

This remedy, in combination with iodine and boric acid, destroys pathogenic diseases, and also promotes an increase in the number of tomato ovaries and provides plants with protection against the occurrence of various diseases.

For the solution, you will need to prepare 3 liters of heated water and 3 small spoons of boron. All this must be mixed, after which 5 metronidazole tablets must be ground into powder. When the mixture cools down, add a glass of milk, a tablespoon of granulated sugar and add 10 drops of iodine.

Plants must be processed at intervals of 2 weeks, starting from the beginning of the tomato growing season.

This application implies the need to water plants with a small amount of iodine or boric acid dissolved in water. Watering must be carried out in the evening so that the leaf plates do not get sunburn.

You can process in this way in May or June. Using a light boron-based mixture at this time, you can prevent late blight.

It is also worth noting that boron should not be introduced into alkaline soil, since it will not be able to enter the planting there.

In addition, you can water with a weak iodine solution. This must be done 3 times: after picking, at the start of flowering and during the ripening period of tomatoes. Watering requires only a drop of iodine per 3 liters of water, while for each bush you can use 0.5 liters of solution.

During the period of flowering and fruit ovary, it is recommended to water with a solution in which you need to combine iodine and boron. You will need 5 drops of each product in a bucket of water.

This method of feeding involves irrigating the plantings with a spray bottle. It should be configured in the fine dispersion mode so that not large drops, but a fine mist fall on the leaves. In this case, it is necessary to spray every planting site, especially when it comes to a boric acid-based solution. The reason for this is the low mobility of boron, its effect extends only to the area where it managed to get.

To treat a plant with boric acid, you will need only 5-10 grams of funds for a bucket of heated water. The solution should cool down, after which it is necessary to start spraying.

Please note that tomato fruits, the growth of which has been stimulated in this way, do not have a long shelf life, and therefore they must be eaten as soon as possible.

As for spraying the ground part of tomatoes with iodine-based liquid, this procedure is carried out somewhat less frequently, when there is a visible threat to planting. However, before this, the plant and its leaves must be thoroughly watered. In general, iodine is most often used for root feeding in order to prevent foliage from burning and the subsequent death of the planting.

After this kind of treatment, your plants will be in perfect order. The means that underlie the solutions help the plantings to get stronger and acquire immunity, which is why they get sick less often. In addition, from such processing, the offering increases, the ovaries do not crumble, and the fruits themselves ripen approximately 2 weeks earlier, growing juicy and beautiful.

The procedure is also performed with iodine or boron. It is mainly boric acid-based solution that is used. Each seed must be sprinkled thoroughly, or left to soak for 2 days. Before planting seedlings, you can also sprinkle it, or leave it soaked in the same solution, but you should not keep it there for longer than a day.

A boron-based solution is also suitable for preventive soil cultivation, but this should be done at intervals of at least 3 years.

How to prepare a solution for processing tomatoes from iodine, boric acid and ash, you will see in the next video.