Arrangement of greenhouses inside: planning tricks

Arrangement of greenhouses inside is a very important stage in the life of a novice gardener. It depends on how comfortable it will be to grow plants and take care of them. And the condition of the grasses, flowers and seedlings themselves also largely depends on how correct the microclimate is created in the room.

A greenhouse is a space in which plants are cultivated or prepared for transplanting into full-fledged beds. It can be either very compact or large, depending on the needs of gardeners and the size of the site. A certain temperature, humidity, and so on must be maintained inside such a room. Various planning tricks make it possible to combine several types of plants in one room at once and make the most of the available space.

Greenhouses can be different, their varieties depend on the features of the internal arrangement. Some of them have beds, others have racks, and still others have full-fledged greenhouses. In addition, they are distinguished by the presence of various technological innovations and additional equipment. In some buildings they cost a minimum, in others, on the contrary, they try to install something new and modern, which will facilitate the process of growing plants.

Depending on the used budget and the amount of free space, you can make both compact greenhouses and spacious ones.

• Most often, small greenhouses are chosen. They do not take up much space and at the same time allow you to grow everything you need. A compact polycarbonate greenhouse is the most popular option. To fit everything you need in a building measuring 3x6 or 3 by 8 meters, you can use options that save free space and budget. For example, replace full-fledged beds with containers, or even completely hydroponics.
• Large greenhouses are mainly chosen by those who grow seedlings or flowers for sale. In this case, the more free space, greenhouses and beds, the better. You can make different drawings, planning full-fledged automatic irrigation schemes so that you have to spend less free time in the greenhouse.

Do-it-yourself greenhouse equipment is not such a difficult task. To arrange a place for growing plants, you need to make sure that the room is constantly clean and moist enough air, as well as that the heating and water supply systems work well.

First of all, in order to be constantly warm in the room where the plants are grown, you need to take care of additional heating. This is a guarantee that the seedlings can be started to grow in early spring, and they will not freeze. The heating system depends entirely on the size of the greenhouse. But the most important thing is that it should be full-fledged, not local. After all, such a system is not able to completely warm up the entire room.

The second important point is that the heat must certainly go from the bottom up., and not vice versa. There are three heating options that can be used in a greenhouse: gas, solid fuel, and electric.

If possible, you can turn to innovative heating methods.Among these, it is worth highlighting the heating of the soil itself. This promotes the rapid growth and maturation of everything growing in the ground. It is quite possible to carry out such a system in your greenhouse. Heating is done with a cable.

Before laying it, you need to lay polystyrene foam or another means of thermal insulation, characterized by increased moisture resistance. A layer of sand can be laid on top, in which the cable is hidden. A protective mesh and a layer of soil are placed on top of it.

You can install a water radiator heating system. Infrared heaters are also very popular. They are, among other things, also capable of illuminating the room. The use of infrared heaters is also considered very beneficial because they can be used to divide the space into several separate temperature zones.

A gas heating system is also considered beneficial. Especially if it is possible to connect the greenhouse to the home heating system. It is also possible to install a burner in the greenhouse or an automatic heating system with a small boiler. And in order for all the efforts spent on heating were not in vain, it is necessary to additionally insulate the place for growing plants.

It is also important to consider the ventilation system. The correct temperature regime is created using ventilation frames. In addition, the room can be supplemented with a special fan. Its installation will not only solve the problem of temperature conditions, but also make it possible to distribute heat throughout the room. This type of fan is installed on the roof. This allows fresh air to enter the greenhouse.

At the same time, when installing ventilation, you need to do everything so that in the cold season, the cooled air does not penetrate into the room. This means that there should be no problems with thermal insulation either.

A very important role in the arrangement of the greenhouse is played by the correct level of humidity in the room. The condition of the plants depends on this. The fact is that if the level of humidity in the room is insufficient, the plants will dry out. But an excess of moisture is also not very good. In such an environment, the root system of the plant develops more slowly, the harvest is also not very happy.

So that the watering process does not take much time, and each plant receives as much moisture as it needs, it is necessary to equip the correct water supply system inside the greenhouse.

• The water supply should always be at room temperature only. Too cold water damages the roots. They quickly rot in such an environment. Also, drops should not be allowed to fall on the trunks of plants and their leaves. This is harmful to some sensitive plants.
• It is worth watering the plants regularly. It is best to do this in the evenings and mornings. As for the amount of water used, it all depends on how deep the root system of the plants is. The deeper it is, the more water is required. In general, the approximate water consumption is ten or twelve liters per square meter.

There are three main ways of supplying water to greenhouses: drip, irrigation and subsurface. Surface irrigation should be abandoned. From this, the humidity inside rises to an undesirable level, and the water flow becomes more difficult to control.

The drip system is much more efficient. In this case, less water is consumed, and it becomes much easier to automate this process. But the most convenient option is, of course, subsoil watering. For such irrigation, you will need to lay a special pipe with numerous holes under the ground. It is through it that watering will be carried out.

This way of supplying water is good because it goes directly to the roots. It turns out that life-giving moisture goes immediately to the right place and does not evaporate along the way.True, this method of irrigation is more suitable for large greenhouses with beds, but not for small rooms where seedlings are grown in pots standing on racks.

Special attention should be paid to such an option as the laying of capillary mats. They can replace traditional irrigation methods. True, such a modern method requires significant financial investments.

The capillary mat is a dense synthetic felt. It absorbs water easily. On the surface of this mat there are pots with plants. Moisture is given to them very slowly. To protect the felt layer from dirt and damage, the surface of the capillary mat is covered with a special porous film.

Such material not only absorbs moisture very well, but also gives it away. Ordinary pallets can be placed under the mat. They are installed on bricks, covered with slate sheets, and then covered with a layer of plastic wrap. A capillary mat is placed on top. In no case should its edges protrude beyond the edges of the film, and the mat itself should be securely attached to the slats.

When the capillary mat is in place, you can start to saturate it with water. This must be done exactly until, when pressed, water begins to protrude from the felt. Do not allow puddles to form on the surface of the mat. If this has already happened, then you need to drive off the water.

If in the greenhouse it is planned to arrange exactly the beds with paths, and not to install shelving, then the arrangement of the space should be taken with maximum responsibility. It is not at all difficult to transfer pots or tubs from a rack to a rack, but it is difficult to remodel the beds.

This process depends on what crops will be grown and what technologies will be used for this. But in general, the standard size of the bed should not exceed 1.2 meters. If you do more, it will be difficult to care for them. And in the future it will not be possible to reach the plants and pluck something necessary.

One compact greenhouse can be equipped with about three beds. The passage between them should be a little less than a meter.

It is very important to correctly position the plants so that they are in place and can develop as well as possible. So, for example, all thermophilic plants should be placed on the sunny side. This can be, for example, tomatoes or different flowers that are drawn to the sun. Cucumbers, in turn, can be placed in the west. The main thing is that a sufficiently high level of humidity is provided for their cultivation.

The main requirement for the tracks is that they are not slippery and react normally to high levels of humidity. For the design of paths in greenhouses, as a rule, materials such as brick, concrete, paving slabs or blocks are used. You can also make the coating less rigid. In this case, materials such as pebbles or sand are used. True, they can stick to the sole, which is very inconvenient.

An option such as concrete pouring is also relevant. The paths made in this way can also be additionally decorated. For this, small stones or pieces of tiles are used, which are pressed into the surface of the coating. You can also overlay the track around the edges with materials such as clinker bricks, paving stones, or the same pebbles.

We should also mention the tracks with filler. In this case, a layer of grass or even manure is laid, on top of which concrete is poured. This track turns out to be quite strong. Along the edges, it can be supplemented with bumpers.

Bumpers are often made of natural wood. But this is not the best option. The fact is that there is usually only enough wood for one season. Over time, wood will rot on the inside, especially in conditions where the humidity is constantly high.

This completes the improvement of the greenhouse with the beds. Then you can proceed to the design of the space. True, since this room is more working, its design should not be too sophisticated.

The second design option for a greenhouse is the organization of shelving in the room. This way of solving the interior space is more suitable for working with seedlings or seedlings. They can even be installed in several rows, which is very convenient.

True, when installing such racks, all the features of the development of certain plants must be taken into account. Anything that is installed in this way must withstand the relevant conditions. Plants grown on racks should not be too thermophilic. Those of them that are most drawn to the light should be installed on the upper shelves.

The racks themselves are not so difficult to make. They should not be too massive and wide. The width of the classic rack reaches ninety-five centimeters. The height can be different, it is selected so that it is convenient to work with plants. Even the top shelves should be freely accessible.

There are many different forms of shelving. Someone is more comfortable working with narrow rectangular shelves, while others prefer square ones. Here the choice is very individual and often depends on the size of the room.

The main requirement for them is not at all compliance with some parameters. The racks must first of all be strong and stable. This is due to the large weight of seedling pots and seedlings.

The most affordable option is, of course, wood. But if you need to equip the room so as to forget about repairing and replacing shelving, then you should refuse wood products. The only acceptable option is properly treated wood. But here the cheapness is out of the question.

You might consider racking with an aluminum alloy, painted steel, or durable plastic frame. This is perhaps the most correct choice, since all of the listed materials do not rot, withstand high loads and have a long service life. The money spent on the purchase of such a rack will pay off over time, because it will stand much longer than a similar structure made of wood.

The last stage of working with this type of greenhouse is the arrangement of the racks and plants on them. It is important to arrange everything in such a way that each species and type of plant gets everything it needs. So, for example, germinate seeds correctly in a shaded corner where artificial lighting is installed. This area is additionally insulated with glass. For the rest, you just need to figure out the conditions in which these or those seedlings and plants should be, so that they are as comfortable as possible, and do the rearrangement "for yourself."

Arranging a greenhouse from the inside can become an even more difficult and important stage than building it. Indeed, only by equipping everything, and having installed heating, water supply and ventilation systems, it is possible to organize conditions suitable for growing seedlings and plants almost all year round.

For information on how to make the layout of the beds in the greenhouse, see the next video.