Greenhouses "Kremlin": features and benefits

Greenhouse "Kremlin" is well known in the domestic market, and has long gained popularity among Russian summer residents and owners of personal plots. The production of these strong and durable structures is carried out by Novye Formy LLC, which has been operating since 2010.

Greenhouse "Kremlin" is an arched or straight-walled structure, the frame of which is made of a steel profile with a section of 20x20 - 20x40 mm with a wall thickness of 1.2 mm. The metal used for the manufacture of greenhouses is subject to mandatory certification and meets strict hygiene standards. The arches forming the greenhouse roof have a double design and consist of parallel pipes connected by rigid bridges. The arcs are interconnected by means of tie girders, also made of metal.

Thanks to the reinforced frame structure, the greenhouse is able to withstand a weight load of up to 500 kg per square meter. This allows the structure to be used in areas with heavy snowfall without worrying about the integrity of the roof.

The metal elements of the greenhouses are painted with Pulverit powder enamel containing zinc, which makes them frost-resistant and not subject to corrosion. All parts, without exception, are processed, including fastening systems and underground parts of the frame pipes. Thanks to the powder coating technology, "Kremlin" greenhouses compare favorably with similar products from other manufacturers and are able to serve for more than a dozen years.

A distinctive feature of the "Kremlin" greenhouses is the presence of a new locking system "crab", which allows you to easily and reliably fix the parts to each other and provides ease of self-assembly. The structure can be installed directly on the ground. For this, the frame is equipped with special legs-pins, which are stuck deep into the ground and rigidly hold the structure.

Greenhouse "Kremlin" is a rather expensive product: the cost of a 4-meter model is on average 16-18 thousand rubles. And the price of an additional module 2 meters long varies from 3.5 to 4 thousand rubles. The manufacturer guarantees the perfect service of the structure under the influence of snow and wind loads for 20 years. In a more gentle mode of operation, the system is able to last much longer.

The popularity and high consumer demand of the Kremlin greenhouse are due to a number of undeniable advantages of the design.

• Strong frame provides high strength of the structure and allows you not to clean up snow from the roof in winter. Due to the good stability and overall rigidity of the structure, there is no need to fill the capital foundation - the greenhouse can be installed directly on the ground.If there are problematic and moving soils on the site, a wooden bar pre-impregnated with an antiseptic composition, cement mortar, stone or brick can be used as a foundation. All metal elements of the structure are coated with an anti-corrosion compound, special attention is paid to the welded seams, as the most vulnerable place for the appearance of rust.

• Polycarbonate coating 4 mm thick provides an optimal level of insolation, and the well-thought-out shape of the frame contributes to uniform heating of the entire greenhouse room. The sheets have a low specific weight, corresponding to 0.6 kg per square meter, and are equipped with a UV filter that protects the plants from excessive exposure to sunlight.
• Convenient location of vents and doors provides an inflow of fresh air. The design of the frame allows you to install an automatic window opening system, which will allow you to program the device to turn on in your absence and ensure regular ventilation of the greenhouse.
• Easy to assemble and the possibility of self-assembly will allow you to install the greenhouse with your own hands in a short time. Without taking into account the time that may be required to form the foundation, the complete construction of the structure will take one day. Installation is carried out using the simplest tools, and the sequence of stages and assembly features are clearly spelled out in the instructions that are attached to each kit. If necessary, the greenhouse can be dismantled and installed in a different location.

• Wide price range allows you to choose a model of both an economy class with straight frame walls and expensive arched systems.
• Large selection of sizes allows you to choose a greenhouse of any size. For small areas, narrow and long structures with an area of ​​2x6 sq. meters, and for spacious gardens, you can purchase a wide three-meter model. The length of greenhouses is always a multiple of 2 meters, which corresponds to the width of the polycarbonate sheet. If you wish, you can lengthen the structure using attachment modules, which are also easy to install.

The assortment of greenhouses "Kremlin" is represented by several series, differing from each other in size, shape, degree of strength and price.

• "Lux". The collection is represented by arched models, which can be installed on any type of foundation, including timber and strip. Available in modifications "President" and "Star". The most popular is the four-meter model, consisting of two end modules, two doors and transoms, four profile guides, and 42 horizontal ties. The distance between adjacent arcs in this model is 1 m.

The set includes 3 polycarbonate sheets, fittings, door handles, bolts, screws, nuts and fixing "crabs". Detailed instructions and a warranty card are required.

The greenhouse is able to withstand snow cover weighing up to 250 kg per square. The cost of a model with such parameters will be 16 thousand rubles. Each additional module 2 meters long will cost 4 thousand.

• "Zinc". The model is produced on the basis of the "Lux" series. The reinforced frame is made of galvanized steel, which provides the structure with high chemical resistance and increased anti-corrosion properties. Thanks to these qualities, in the greenhouse room or in the surrounding area, it is possible to treat plants with anti-pest agents without fear for the safety of the metal structural elements.

• "Bogatyr". The series is represented by extra strong arched structures capable of withstanding a weight load of up to 400 kg per m2.High reliability is due to the reduced distance between adjacent arcs, which is 65 cm, while in other series this distance is equal to one meter. The profile pipe has section parameters of 20x30 mm, which is also slightly higher than the profile dimensions of other models. "Bogatyr" is produced in standard lengths, which are 6 and 8 m, and is recommended for installation in spacious areas. The area of ​​the greenhouse room allows you to equip the structure with a heating system and use it in the winter.
• "Fairy tale". The series is represented by budget models with small dimensions, straight walls and an arched roof. This allows you to use the greenhouse in small suburban areas. The model is only 195 cm high, the minimum length is 2 m, and the width does not exceed 2.5 m.

• "Arrow". The series is represented by an arched design of a pointed type, due to which it is able to withstand a weight load of up to 500 kg. The arches have a single design, but due to the increased cross-section of 20x40 mm, they give the frame high strength. All metal elements are galvanized and have a durable anti-corrosion effect. This model is the newest development of the company and includes all the main advantages of the previous series.

It is very easy to mount the greenhouse frame, even a person who does not have assembly experience is able to completely assemble the structure within one day. Self-assembly and installation of the Kremlin greenhouse is carried out using a jigsaw, screwdriver or screwdriver, wrenches, a drill with a set of drills and a tape measure. The design features allow the greenhouses to be installed directly on the ground, but given the power of some expensive models, as well as the possible snow load in winter, it is still recommended to form a foundation. The fastest and most inexpensive foundation option is to use a wooden beam treated from pests and parasites.

After installing the foundation, you can proceed with the installation of the frame, which you need to start by laying out all the parts on the ground in the sequence in which they will be installed. Assembly begins with securing the end pieces and arcs, connecting them, and then vertically aligning them.

Then the supporting parts are installed, after which the transoms and doors are installed. After the frame is completely assembled, you can start laying the sheets.

Cellular polycarbonate should be fixed with an H-profile: this will improve the appearance of the greenhouse and will favorably distinguish such a structure from a structure on which the sheets are overlapped. Before laying polycarbonate, it is recommended to put a silicone-based lubricant into the grooves located on the frame, and treat the end parts of the sheets with alcohol. This will make it possible to form a more sealed structure and exclude the ingress of melted snow and rainwater into the greenhouse. Strict adherence to the installation technology and the sequence of assembly stages will allow you to assemble a solid and reliable structure that will last for more than a dozen years.

Timely care and careful operation will preserve the original appearance of the greenhouse and significantly increase its service life. The structure should be washed with a soft cloth and soapy water. The use of detergents with an abrasive effect is unacceptable: the surface of polycarbonate from such processing can become cloudy, which will worsen insolation and negatively affect the appearance of the greenhouse.

In the summer, the room should be regularly ventilated., this will help to remove excess moisture formed as a result of soil evaporation, and ensure the correct growth and development of plants.Models, the maximum permissible weight load on the frame of which does not exceed 250 kg, should be additionally strengthened for the winter. To do this, you need to build supports and install them under the middle arches of the greenhouse. This will reduce the load on the frame and prevent it from deforming.

Greenhouse "Kremlin" is very popular and has a lot of approving reviews. The availability of installation without the use of expensive tools and the involvement of specialists is noted. Attention is drawn to the possibility of self-selection of the required length by adding additional modules. The advantages include the absence of the need to regularly come to the country in winter in order to clear the roof of snow. The disadvantages include the high cost of even the most budget models.

Why the Kremlin greenhouses are considered the best, see this video.