How do I remove the TV from the wall bracket?

Modern TV models differ markedly from their predecessors. In addition to improving the picture quality and signal reception, the body of the devices has undergone significant changes. Previously, the filling of the TV was rather cumbersome, therefore, to install it, a special cabinet was needed, which had to be moved 20 cm away from the wall. Today's flat-shaped TVs are increasingly being mounted on a wall or ceiling. This installation method helps to get rid of the clutter of unnecessary furniture. And the design of the brackets allows you to turn the TV exactly as it will be convenient for users.

The process of attaching the bracket to the wall and installing the TV on it is described in detail in the instructions for the mounting device. In the event of repairs, moving, breakdowns or buying a new TV, it becomes necessary to remove this household device from the bracket. Before that, you should perform a number of steps that will greatly simplify the whole process.

1. Prepare the necessary tool. Most often, the holder plate is attached to the body of the TV receiver with 4 screws, so you only need a Phillips screwdriver to remove the TV.
2. And also you need to prepare in advance a place where you can put the TV removed from the holder. To do this, a soft cloth should be spread on the floor or table area, taking into account its size, so that later it would be enough to completely cover the device. This will protect your device's screen from scratches and damage.

Detaching the TV from the bracket will not be difficult. Anyone who knows how to hold a screwdriver can do this job. The TV will be removed from the wall mount by following the steps below in sequence.

• Turn off the working TV.
• Disconnect the unit from the power supply.
• Remove the plug that connects the device to the antenna.
• Disconnect other existing wires and additional devices (players, speakers, set-top boxes).
• Pull the wall mount bar forward as far as possible to access the rear panel.
• Find a rectangular strip with 4 screws on the back of the TV.
• Unscrew each fixing bolt in turn with a screwdriver.
• Hold the TV underneath and lift it up slightly to remove it from the mounts. It is more convenient to do this work together, especially in cases of oversized equipment.
• Hold the device and place it in a prepared place.

This completes the dismantling of the LCD panel from the bracket. If there is a need to remove the bracket, then for this you will need to unscrew 4 more self-tapping screws that attach it to the wall.

Plasma or LCD panels placed on a wall usually have a wide diagonal. Therefore, the weight of such a television device will be quite high. In addition, the device is connected to a voltage source of 220 V. Therefore, when disassembling, all precautions must be taken. Before starting manipulations, you must:

• make sure the TV is de-energized - this will help to avoid electric shock;
• make sure that all existing wires are removed from their respective sockets, located on the back or side panel, otherwise the connector or connecting wire may be damaged by sudden movement;
• Before removing the TV from the bracket, you need to make sure that it can be carried alone, otherwise, you will need an assistant - this will protect the device from possible damage to the case or screen during transfer.

You should also avoid the trouble of pet claws. Young children should also not have access to the device. They can scratch the screen with a pencil or other sharp object.

The TV, securely attached to the wall, is protected from being dropped by someone's negligence, and is also protected from damage by children or animals. But if there is a need to temporarily remove the TV panel from the wall, you need to try to put it back in place as soon as possible. If this is not possible, the best way to store the removed device would be to find it in its original packaging. If the packaging has not been preserved, then a protective film must be glued to the screen, and the entire body must be wrapped in a soft cloth.

Removing the TV with the bracket will leave visible holes on the wall. If it is no longer planned to install the mount in this place, it is recommended to fill these holes with mortar, and then carry out the planned wall decoration.

How to make a TV mount on the wall with your own hands, see below.