How to connect a laptop to a TV via USB?

Modern technologies make it possible to use a TV not only for its intended purpose, but also as a main or even an additional monitor for a laptop; you can connect it to a TV via USB, while you can transfer both image and sound for watching movies or computer games.

The most optimal and popular connection is the HDMI connection. but not always, even on new devices, there is a corresponding connector, and sometimes it can simply be damaged. In this case, it will be useful to know how to connect a laptop to a TV via USB.

In this way, you can connect any not very old TV that has a USB connector.

Since the TV is only capable of picking up HDMI or VGA signals, the connection requires a device that can convert USB to these connectors. This converter can be either an external video card or a wireless adapter device. Thus, to connect a laptop to a TV, you need a laptop with a working USB 3.0 connector, a relatively new TV with HDMI output and converter, available at a computer hardware store.

When using a USB video card, you will need a reversible USB cable... By the way, such a cord can be pre-built into the converter; you don't have to purchase it separately. A two-way HDMI cable is also required to connect to a TV. For a wireless connection, you only need the adapter itself.

The connection process takes just a few minutes.

• Connection using a video card. First, turn off both the TV and the laptop to avoid overvoltage and burnout of the adapter. Insert one end of the USB cable into the USB connector on the laptop, and connect the other to the video card. In the same way, we connect the TV to the video card using an HDMI cable. Typically TVs have multiple HDMI inputs. You can choose any that you like best, you just need to remember the number of this connector for further connection settings.

• Connection using an optional adapter. In this case, we also turn off the devices first. Then you need to connect the HDMI cable to any working HDMI jack on the TV. We plug the other end of the wire into the adapter and plug it into an outlet, since it operates on a 220 V mains voltage. To connect the adapter to a laptop, we use the small wireless USB signal adapter that comes with it. We turn on the laptop, after which the drivers will be installed. All new versions of Windows are equipped with programs that do this automatically. If this does not happen, the drivers can be installed from optical media by inserting it into the laptop's drive and following all further instructions. After preparation, you can start configuring the software of the devices and the connection itself.

The remote control always has a connection setup button, usually at the top.Click on this button and from all the options select the HDMI connection with the required connector number, to which the wire was connected, thereby switching the priority signal source.

Setting up a computer includes, first of all, setting the type of image and its extension. The expansion is limited only by the capabilities of the monitor, that is, the TV. In Windows OS, using the right mouse button on the desktop, select the item "Screen Control" and then set all the necessary parameters. Next, you can customize the required options for the image.

With the mirroring function, the TV screen is used as an additional monitor, that is, it repeats all the actions carried out on the laptop, the expansion method helps to place several working windows, both devices function as one large monitor, the projection function turns off the laptop screen and completely transfers the image to the TV screen, which convenient for, for example, computer games.

Thus, using a USB connection, you can connect any device to your laptop, be it a TV, an additional monitor or a projector.

How to connect a laptop to a TV using USB, see the video below.