How to demagnetize a TV?

Nowadays, many people buy expensive TV sets that make life much easier for a person. However, not everyone can afford it, and the old versions of technology still "live" to this day in many apartments and dachas. This article is dedicated to just such old tube TVs that can magnetize over time. Let's figure out how you can demagnetize the TV yourself.

A sign of magnetization is the appearance of multi-colored or dark spots on the TV screen, usually they first appear in the corners of the screen for a certain period of time... In this case, people think that their "old friend" will soon fail, so it is necessary to look for a replacement for him. Another category of citizens is sure that in such a situation the kinescope will soon "sit down" and it is necessary to look for a replacement for it. But in both cases, people are wrong - nothing needs to be done except following some recommendations.

With the help of such an element, various colors (blue, green and red) are projected onto luminophone CRT. In the production of TVs, manufacturers equip them with posistor and coil (A posistor is a thermistor that changes resistance when the temperature changes, usually made of barium titanate).

Posistor looks like a black case with 3 pins coming out of it. Coil laid on the tube of the picture tube. These elements are precisely responsible for ensuring that the TV does not magnetize. But when the TV stops working for this reason, this does not mean at all that any of these elements is out of order. It is still necessary to check them.

There may be several reasons for the appearance of such a phenomenon:

• the most common problem is in the demagnetization system;
• the second possible reason may be frequent switching on and off of the TV's power at short intervals;
• the device did not turn off from the 220V network for a long time (it worked or was simply on duty);
• Also, the appearance of spots on the equipment is affected by the presence of various household items next to the equipment: cell phones, speakers, radios and other similar household items - those that cause an electromagnetic field.

As for problems with the demagnetization system, it rarely fails. But if it happened then it is necessary to pay attention to the posistor, because it is he who is most often susceptible to this problem. The reason why this element stops working can be considered improper operation of the equipment as a whole. For example, a consumer turned off the TV not by using a button on the remote control, but by unplugging the power cord from the outlet. This action leads to the appearance of a current surge with a large value, which makes the posistor unusable.

There are several ways to demagnetize the TV yourself at home.

The first way is the easiest. It consists in turning off the TV for 30 seconds (at this moment, the loop located inside the equipment will demagnetize), and then turn it on again. It is necessary to look at the number of magnetizing places: if there are fewer of them, then it is worth repeating this action several times until the spots on the screen completely disappear.

The second way is much more interesting. But for this you need to build a small device yourself - a choke.

To do this, you will need the following materials:

• frame;
• insulating tape;
• small button;
• a cord that can be connected to a 220 V network;
• PEL-2 cord.

First of all, it is necessary wind the cord around the frame - you need to complete more than 800 revolutions. After these manipulations, the frame should be insulated with electrical tape. The button is fixed, the power cord is connected. Then you need to perform a number of manipulations to demagnetize the device:

• turn on the TV, let it warm up;
• we turn on the device for demagnetization, at a distance of 1-2 m from the picture tube, we widely rotate our device, gradually approaching the TV and reducing the radius of rotation;
• distortion should increase as the device approaches the screen;
• without stopping, we gradually move away from the picture tube and turn off the device;
• if the problem persists, you should repeat such manipulations again.

Our device cannot be kept under the influence of the mains for a long time - it will heat up. All stages of demagnetization should take no longer than 30 seconds.

It is also worth noting that this the method is suitable only for equipment that is made on the basis of CRT - this method is not applicable for LCD variants.

If there is no way to make such a design as a choke, then you can also use the following options:

• take the starter coil - it must be designed for 220-380 V power supply;
• electric razor;
• a pulse soldering iron, sufficient power to demagnetize the equipment;
• an ordinary iron, which is heated using a spiral;
• electric drill with neodymium magnet (included).

The procedure in this case is the same as when using the throttle. However, to obtain the desired result, a strong magnetic field is required. Some people have heard that a TV can be demagnetized using a conventional magnet. But this is not so: using such an object, you can only enhance the multi-colored spots on the CRT, but not in any way demagnetize the equipment.

To prevent the TV from getting magnetized, you should carefully study the recommendations of expertspresented below. In order not to face such a problem as magnetization, it is necessary to properly operate the equipment. This requires:

• to correctly disable it: via the button;
• give time for the equipment to rest after work.

In that case, if the posistor is out of order, and there is no way to replace it with a new one, then this element can be removed from the board, and you must use a soldering iron. However, this will entail only a short-term demagnetizing effect - after a while the screen will return to its original state.

To do this, go to the TV menu and find the item of the same name. If this section is enabled in the menu, then the screen will turn blue if there is no antenna or if the signal is of poor quality.

So, we select the "Blue Screen" function, turn off the antenna - a blue screen appears. At the same time, we pay attention to the quality of the blue tint. If the display has spots of different colors, it means that the screen is magnetized. It should be noted that modern LCD monitors have a special demagnetization function, which is located in the equipment menu.... For this reason, it will not be difficult to use it.

How to demagnetize the CRT, see below.