Left hand drills for metal

In the process of performing construction and repair work, it is sometimes necessary to unscrew the bolt. And if before that it was broken off for some reason, it is quite difficult to unscrew the remainder. This must be done very carefully so as not to break the thread. Inexperienced specialists try to get rid of the bolt with a conventional (right-hand) drill, not realizing that these actions will only further aggravate the situation. You need to use a non-standard left drill.

Left hand drills come in two tail shapes: cylindrical and tapered. Regardless, the drills have the same components.

• The main working part, made of victorious alloy or specialized high-speed steel. This part consists of two cutting edges.
• Calibrating part for cleaning the drilled hole.
• The tail part, with which the product is fixed in the chuck of the power tool.

As mentioned earlier, such atypical drills are used to extract creases from the hole. The principle of operation of such accessories is quite simple. The drill is inserted into a power tool that is driven. As soon as the drill touches the crease, it will drill out. There is one important point: drills for metal rotation should be 2-3 mm smaller than the thread size. Otherwise, it may be irretrievably damaged.

Left hand drills are used both in everyday life and in production. With their help, you can drill out a broken bolt in a few seconds. It is noteworthy that the "reverse" button on the power tool during work with such a drill must be turned on. That is, drilling will be carried out in the opposite direction.

The scope of this type of drill is quite wide:

• they are often used in auto repair shops;
• to repair any parts;
• when repairing furniture.

Since the accessory is atypical, it is necessary not only to work with it carefully, but also to choose the right one.

There are many important nuances to consider when choosing a left-hand drill. Attention should be paid to the following parameters.

• Shank. You need to immediately look at its shape. And in order to determine the choice, you need to know the type of cartridge in the power tool that will be used. Depending on this, you will need to choose a drill with a cylindrical or taper shank.
• Manufacturing material. High-speed steel products are considered to be of the highest quality.
• Sharpening angle. Here, the material in which you want to make holes will help to determine. So, if it is cast iron, then the angle should be 110-120 ° C. For softer materials, you need to take less.
• The size. It all depends on individual requirements.

Also, when buying, you need to look at the information about the manufacturer. The highest quality and most popular are the models made under the brands Bosch, Makita, Interskol and Zubr. There is practically no difference in products from foreign and domestic manufacturers. They differ only in cost. And so it all depends on individual preferences and capabilities.It is not recommended to buy products from dubious suppliers or those that do not have any information about the manufacturer.

See below for an overview of a counter-rotating drill.