All about the drill "ballerina"

Any person who has ever been involved in repairs has more than once faced the need to make large-diameter holes in sheet materials: tiles, plastic, drywall, iron, wood and products based on it. You can, of course, use a jigsaw, saw, or use any other method you know, but in this case it will be difficult to do and, in addition, the hole will not turn out perfectly round. The best option would be to use a special device for making holes of large diameters, which is popularly nicknamed "ballerina" due to the fact that its rotation during operation resembles that of a dancer on stage.

The main feature of the "ballerina" drill (its full name sounds more than impressive - "adjustable type circular drill with incisors") is the ability to change the diameter of the cut circle... The distance between the cutting elements can be adjusted using the auxiliary scale on the mounting bar. If maximum accuracy is required, then here you have to use a caliper. This is quite convenient when it becomes necessary to make a hole for a pipe or other round piece without backlash.

The second distinguishing feature is the number of incisors. It can be from one to three and the quality of processing the edges of the cut holes depends on this. If you have purchased an adjustable drill with one cutting element, then you need to be prepared for the fact that the tool will "hit". Vibration increases with an increase in the diameter of the cut hole: the larger it is, the higher the runout. This is because there is no balancing about the longitudinal axis.

The construction of a circular drill is quite simple and basically consists of three parts:

• drill, responsible for centering the fixture;
• a fixing rod of a certain length, on which the cutting elements are installed;
• cutters equipped with a device for attaching them to a rod, their number ranges from one to three.

This construction is used on single and double cutter models. If there are three cutting elements, then in this case the cutters are fixed on a circular disk, and move along the slots to change the radius. Additionally, some models can be equipped with a protective cover that protects the working person from flying shavings or sawdust. It also protects the worker from being hit by shrapnel when the device is destroyed.

Now let's see how to drill. With a central drill, you need to drill at a predetermined point... If the materials are strong, for example, iron, tiles or laminate, it is better to first mark the drilling site with a conventional drill. This is done for convenience, so that the "ballerina" does not slip on the surface and does not scratch the top layer.

Next, we cut the path of the radius we need. Again, here you need to pay attention to the material in which the holes are drilled. If this is a tile, then to prevent damage to the facade surface, you need to drill at a low speed and lubricate the tile with water or machine oil. This will prevent damage to the tiles and the scattering of debris.Tile panels must be laid on a flat surface, otherwise they will crack with effort.

If the tile is already attached to the walls or floor, then you only need to cut through it, and then change the "ballerina" for a drill for concrete. When drilling laminate or veneer, it is difficult to pass the top layer, but it goes further easier. There are no special instructions for wood, iron, plastic and drywall. The last step is to remove the cut objects.

In addition to the basic instructions, there are a few additional nuances.

• in no case you must not put pressure on the instrument, lean on it with your whole body: this can damage the device and split the material in which the hole is made;
• you can not use "impact" or "perforating" modes, drilling only;
• no need to let the "ballerina" overheat: from high temperatures the coating of the incisors may deteriorate;
• if drilling is slow, then turnovers should be added.

To protect your health when working with the circular hole drilling attachment, you need to follow some simple rules:

• before starting work, you need to check whether all components of the device are securely fixed;
• wear goggles or a mask to protect your eyes;
• clothes should not contribute to getting into rotating elements;
• if possible, it is imperative to install a protective grill on the "ballerina".

Manufacturers divide circular drills into the following types:

• by the number of cutting elements (1, 2 or 3);
• by the diameter of the holes to be made (from 20 to 400 mm);
• by the depth of drilling of the material, in mm (15-20 mm);
• by the presence of a protective casing.

The design of circular drills for drilling holes in wood, tiles, metal and other materials is similar, the models differ only in the coating of the cutters. For materials harder than wood or plastic, diamond dusting or soldering from Pobedit is used.

Before choosing a "ballerina", you need to know its main advantages over other devices for cutting large holes, be it crowns, jigsaws, etc.

Pluses of circular devices of the adjustable type:

• the ability to replace the central drill or lateral incisors at any time;
• structural reliability;
• if necessary, cutting elements can be sharpened;
• adjustable hole width.

Now let's look at the parameters that you need to pay attention to when buying.

• Reliability... It is unlikely that you can determine this criterion visually, so it would be better to check the quality certificates for the products from the seller. Most likely, they will not be for a low-quality product.
• Workmanship. Before purchasing, you need to carefully examine the device for the presence of shells, chips and other flaws. The incisors must be well and accurately sharpened. If the drill is very long, then you need to check if it is even. Usually these defects are visible immediately and by eye.
• Package. High-quality products from well-known manufacturers usually have bright and solid packaging. There will be no grammatical errors in the text. None of the famous brands can afford to package their products somehow.
• Price. Cost can also be considered an indicator of quality. Inexpensive models last a very short time.

Famous brands care about their reputation, and their products will meet all quality criteria. That's why it is better to contact authorized dealers so that the money is not wasted.

The following video tells about the ballerina drill.