All about petrol loppers

To form a beautiful garden, you need special edging tools. Not so long ago, a hacksaw and pruner were such equipment. With the advent of loppers (wood cutters, brush cutters), garden work has become more enjoyable and easier. Loppers are of three main types: mechanical, electrical and gasoline. The article will focus on gasoline equipment for cutting branches.

The gasoline wood cutter is a professional tool, it has a two-, three- or four-stroke air-cooled engine. These types vary in power, weight and cost. All control elements, together with protection against accidental activation, are located on the boom. Such a unit is the most powerful of the tree pruning equipment and is able to process a large garden or forest park in a short time.

Lightweight, short-handled loppers for cutting small branches. With this tool, the garden is pruned with one hand. Brush cutters with a bar allow you to work at a height of up to 4 meters.

Gasoline models have great advantages when compared to electric or mechanical delimbers. The availability of such a tool for a gardener will greatly facilitate the routine work of pruning trees and shrubs. The advantage of gasoline equipment is as follows.

• The highly efficient internal combustion engine makes the gasoline wood cutter one of the most powerful pruning tools available.
• It has high productivity, capable of processing large plantings in a garden or park area.
• Unlike an electric brush cutter, petrol equipment is mobile and does not depend on the mains power source.
• Electric tools should not be used during wet weather, and gasoline delimbers are not affected by the weather.
• For mechanical hedge trimmers, the maximum thickness of the branches to be cut should not exceed 5 centimeters. And the petrol ones are powerful enough to tackle thick and hard branches, removing them at any angle.
• All surfaces of the wood cutter have a reliable anti-corrosion coating, which is very important when working with fresh wood that produces acrid sap.
• Perfectly sharp blades make it possible to carry out pruning without "crushing" the branches and without harming the plant.

Unfortunately, there are also disadvantages:

• the petrol lopper makes a noise;
• he needs fuel;
• it requires periodic maintenance;
• more powerful models are heavy;
• gasoline equipment surpasses all other models of delimbers in cost.

Garden pruning equipment should be versatile as it performs different tasks. Sometimes you have to cut branches, "diving" into thorny bushes, or hold the tool above your head, working with dry branches at a height of 3-4 meters. For fresh and dry growth, for thin branches and thick branches, for a normal cut of material and the formation of curly bushes, there should be different branch cutters.

This is a very powerful gasoline-powered equipment that can completely remove bushes, thin out the garden, or cut large voluminous branches. The working part of such a unit is freed from the engine, which is moved back and does not interfere with the working moment. The cutting disc cutter is made of durable high-alloy steel.

Lightweight models are used with attachments resembling a hairdressing machine and D-shaped handles. They are intended for the formation of bushes, with their help, you can perform curly pruning, you just need to change the attachments. The cutting tool may look like a long comb or fork, or it may have a single-sided or double-sided blade. One-sided models are more productive, but two-sided models are surprisingly maneuverable and can give any shape to the bush.

A barbell is used to cut off "living walls" at high heights. Before starting work, the cutter bar is set at a convenient angle in order to further facilitate and speed up the formation of the fence. The same cutting tool can be used to trim a low "live fence", but without the bar. The rotary unit will facilitate the work, as well as the engine, which creates a convenient balancing, acting as a counterweight.

They are used if you need to remove branches with a diameter of more than 30 mm. The Hitachi CS33ET12 technique or the Patriot 2515 mini-chainsaw-lopper copes well with this task. Such equipment is capable of handling up to 80% of household work, it can form trees, remove small branches, saw branches. The tool has light weight, small dimensions and good maneuverability, in most cases these are one-handed models. The volume of the fuel tanks of light tools allows you to work without interruption for an hour, as it is equipped with a primer for pumping gasoline.

You need to wear protective goggles when working with delimbers, especially for pole saws. They look like saws with motors on long telescopic bars. At the end of the elongated handle is a fixed tire with a moving iron chain and pointed teeth. Connects the motor and the cutting tool, a metal shaft that is located inside the rod. Most often, poles are equipped with dual-slope engines. The attachments can be changed on the delimber as needed.

• Disc cutters are able to remove small trees and cut shrubs at the root, with their help, branches of medium thickness are removed.
• Trimmers are used for thin growth and leaves. One can highlight the successful model of the Husqvarna 531RS lopper-trimmer from Japan. The equipment has a quick and easy start, reasonable weight and fast processing speed of the top wood mass.
• Chainsaws handle the thickest branches.
• For rough processing of solid wood, circular knives are needed.

When choosing a petrol lopper, you can pay attention to the model Champion PP126, marked by ergonomics and ease of use. It has an affordable price with a sufficiently high motor power. Strong branches, up to 20 centimeters thick, lend themselves to it.

Popular model Husqvarna due to its light weight and ability to prune branches even in the most difficult to reach places. Despite the high power and long operating time, the fuel consumption is minimal at the same time. The model is equipped with an inertial wheel, which makes it possible to reduce vibration and improve the quality of pruning.

Austrian company Stihl became famous for its comfortable and safe wood cutters. The “Shtil” unit is the record holder among all the known tower-cutters because of the maximum length of the rod, which allows, standing on the ground, to work in the crown of a tree at a height of up to 5 meters.The equipment has a reduced level of noise and vibration. "Calm" is able to produce artistic pruning, ideally level the "hedge", form the crowns of decorative trees.

For an overview of the Universal Garden 2500 delimber, see below.