Making a bar stool with your own hands

Many owners of private houses or apartments choose a counter and bar stools for their kitchen, since this option looks more interesting. However, in stores it is not always possible to find furniture that fully satisfies the taste, furnishings, and style. Some carry out the manufacture of a bar stool from a profile pipe or from other materials with their own hands. Cope with such work can be quite easy, you just need to follow certain rules.

The easiest way to create a bar stool is using plywood, wood.

To make a homemade chair, you need to prepare the following:

• a workplace for making a chair;
• varnish;
• screwdriver;
• brushes;
• roulette;
• solvent;
• jigsaw;
• stain;

• hammer;
• a sanding machine or sandpaper;
• drill;
• self-tapping screws;
• roulette;
• plane;
• bit.

It is also necessary to prepare the selected materials - plywood or wood. Some people make metal bar stools with their own hands, but this work is much more difficult. In the process of manufacturing furniture, a diagram or drawing with exact dimensions is used, otherwise there is a possibility of making a mistake and spoiling the product. Focusing on certain dimensions, it will be possible to find out exactly how much wood or metal is needed, and prepare the required amount of materials.

The most accessible wood materials are birch and pine. Some elements of old furniture can be used.

Cut out the following parts:

• 4 stiffeners 3 cm thick each;
• 2 circles: the first 2 cm thick and 260 mm in diameter, the second 3 cm thick and 360 mm in diameter;
• 4 legs, 3 cm thick each.

A backing will be made from a small circle, a seat from a large one. Make sure the direction of the wood grain in the legs is vertical. Then start assembling the furniture with self-tapping screws. Connect the legs with each other and with a small circle, screw a large circle to it, then screw the stiffeners. Tinted furniture using stain, wait until the chair is completely dry. Apply varnish to the surface (two or three coats).

Another version of the wooden chair is slightly different. It is very easy to make and convenient to use. The seats of these bar stools can be upholstered in fabric, bent or straight.

The procedure is as follows:

• First draw up a drawing.
• Study the other drawing carefully. To keep things simple, the two elements that are under the seat are not listed here. Remember that you will have to add them during the furniture assembly.
• To make the legs, prepare the beams (3.8 * 3.8 cm). If there is no solid birch or pine, wood such as poplar can be used. The length of each bar is 710 mm.
• Attach the apron (small crossbar) at the top. Attach the bottom and middle beams as well.
• Then take a stand and attach the longer bar to the right. Then attach the bottom element, it will act as a footrest.
• Do the same on the left side. To sit on a chair as comfortable as possible, when determining at what height the footrest should be, focus on the growth of future owners.
• Attach the halves of the furniture to each other.

To create a recess in the seat, you need to saw it out on the surface and then chisel it out using a chisel.Then the seat needs to be sanded and connected to the legs, and then the entire chair needs to be sanded. As a finishing touch, paint and varnish should be applied to the furniture.

If there is a need to stylize semi-antique wooden furniture, you can use special means for aging.

For the back, you will need additional blanks.

The metal chair is a reliable and durable piece of furniture. In the process of work, metal profiles, sheet metal, various cuts are used.

• Take a flat sheet of asbestos that is used for welding and mark the shape of the seat on it.
• Based on the sketch, create blanks using strips of 2.5 cm.
• To make the inner part, prepare elements of the same width.
• Then the workpieces need to be welded and cleaned, the corners must be rounded.
• Then you need to weld the legs to the seat (use a 3 * 2 cm profile). When carrying out welding work, connect the elements at one point. The legs need to be gently bent until they are in the desired position.

• The rungs for the legs must also be created using a 3 * 2 cm profile. Mark the places on the legs where the rungs will be attached. You should focus on what the height of the person for whom this chair is intended.
• For metal legs, it is worth choosing wooden thrust bearings, not rubber or plastic corks. Wooden inserts will not damage the floor. If you need to resize them, you can sharpen them. The footrests do not need to be fixed with glue or screws, they will hold well due to friction. You just need to grind them so that they are equal in size to the legs.
• Now all that remains is to apply paint and varnish material to the furniture. First you need to use a primer. When the chair is dry, apply black paint to the entire area below the seat. After that, the furniture should dry completely again.
• You need to cover the black legs with foil so that they do not get dirty with other paint, and paint the seat using red dye.

You can create beautiful furniture from metal pipes with your own hands. Such a chair will perfectly fit into loft-style rooms. The furniture body itself is made of pipes. It is better to opt for chrome-plated stainless steel. It is not worth choosing PVC or plastic for such products, since these materials are not as strong as metal.

Prepare the following:

• foam rubber, upholstery;
• pipe benders;
• Chipboard or plywood;
• mounting bolts;
• metal pipes;
• drill or screwdriver;
• construction stapler and staples for it.

It is necessary to make a chair following the instructions below:

• Decide which chair you will be making. You can look at the photos in magazines and rely on them in the future.
• Focusing on the bar counter, think about how high the chair you need.
• Prepare metal pipes to serve as the base material. Determine the optimal length and cut the pieces. It is necessary to take into account the maximum load on the furniture when choosing the diameter of the metal blanks.

• Using a pipe bender, make semicircles out of the pipes. The workpieces must be connected to each other using fastening bolts. This will make the furniture as stable as possible.
• Use plywood or chipboard to make a seat. When choosing its size, you need to focus on how much the person for whom the chair is intended weighs.
• Use a stapler to wrap the foam and upholstery on the seat. The fabric must be resistant to dirt, easy to clean, suitable not only for dry but also for wet cleaning.
• When the seat is ready, attach it to the junction of the metal legs. This can be done using fasteners, a drill or screwdriver.

Many people prefer to additionally decorate their handmade chairs, regardless of what material they are made of. One of the most popular decoration options is the use of fabric. First you need to decide on the shade and type of material, while you should focus on the overall design of the kitchen. Tapestry, furniture silk, microfiber, jacquard are often chosen for decorating chairs. Some people prefer to decorate furniture with various decorative elements, paints, paper, glue.

You can choose different materials for decoration and use the decor to make an ordinary chair turn into a real work of art.

When making furniture with their own hands, many make various mistakes. Some of them are easy enough to fix, but there are others that negate all efforts. If you want to avoid problems, take the matter as seriously as possible, try to take into account even seemingly insignificant nuances.

If you have little experience in the manufacture of furniture, do not tackle a complex structure right away, it is better to choose the simplest option. So you can practice, get the necessary skills. Then you can already think about how to raise your level. If you aim to create a rather complex and unusual model, it is better to first use a special computer program to select the perfect design.

The most easy-to-use and popular programs with which you can create drawings, as well as simulate a preliminary result, are the following:

• Cutting;
• PRO-100.

How to make a bar stool with your own hands, see this video.