All About IRWIN Clamps

The clamp is an auxiliary tool for locksmith and construction work. The tool allows you to fix the product during repair, welding or gluing. IRWIN is one of the largest manufacturers of locksmith tools, including clamps. The features of this device and the rules for its choice will be discussed in this article.

A clamp is a device that is used to firmly fix products by pressing them against each other or against any surface. The tool is used during plumbing, installation and repair work.

The movable mechanism is located lever (screw). It is also a clamping device that allows you to fix the moving element and adjust the compression force. Such repair devices are made of wood and metal.

IRWIN clamps are distinguished by their durability and quality. High quality material is used in the production of models. For the jaws of the clamps, a special material is used, which excludes damage to the products during clamping. Some models are made of durable plastic and have a robust design. In IRWIN models, there is the possibility of adjusting the feet, designed to fix elements of various shapes.

Clamps are divided into the following types:

• quick-clamping;
• G-shaped;
• F-shaped;
• corner;
• end;
• automatic;
• pipe;
• tape;
• spring.

Quick clamping device used for quick fixing of parts. The tool is a lever-axial design, which reduces the load on the user's hand when working with the clamp.

G-shaped devices are considered a unique type of this instrument. Such a clamp is used to fasten products to any surface, and is also considered a cheap replacement for conventional vices.

F-shaped products have an adjustable clamping jaw. Therefore, this tool allows you to work with parts of different shapes.

End types of clamps equipped with three fixing mechanisms and are used when gluing overlays on the ends of furniture modules. The device fixes securely, but is considered inconvenient. It is quite difficult to hold the clamp, adjust the screws and at the same time still hold the cover that is glued to the end of the piece of furniture.

Automatic clamp - professional quick-release mechanism. The tool is one-handed. The product can be clamped with one hand. The disadvantages of the mechanism are: poor fixation of clamps and paws, made of plastic, which wears out over time.

Pipe structures are used when gluing dimensional products from which countertops or doors are made. The mechanism consists of a tube with two clamping legs. One foot is fixed with a stopper, and the other is fixed. The device allows you to glue dense parts and has a large grip... The downside of the tool is its size: the product is too long, so working with it is problematic.

Belt type Clamps are not very common. It is used in the production of frames, chairs, in the assembly of wooden barrels.The fixture includes a high stiffness fabric band and a tension block.

Spring tool equipped with a spring mechanism that creates compression. The design is similar to a large size clothespin. Such a clamp is considered an imperfect tool, because over time, the compression force of the spring weakens, as a result of which it becomes more difficult to fix the part.

An overview of the models should start with the device IRWIN Quick Grip XP 600. Its main characteristics are as follows:

• metal - high quality;
• plastic elements - shockproof;
• compression force - up to 240 kg;
• clamping mechanism - two-position, stable, does not "shoot";
• the length of the fixing jaws - 96 mm;
• there is a possibility of clamping at a certain angle.

Manual clamp IRWIN T59100ECD / 38 mm. Its main characteristics:

• high quality steel;
• sponges - made of a special material so as not to spoil the part;
• smooth operation of the expanding mechanism, which ensures safe operation;
• used when gluing or compressing products with each other.

Model IRWIN T59400ECD / 100 mm. Specifications:

• a product made of durable plastic;
• comfortable handles for confident work with the structure;
• the legs are adjustable for fixing parts of different shapes

The IRWIN T59200ECD / 50 mm model is characterized by the following features:

• used for gluing and compressing products;
• reliable and durable construction made of high quality steel;
• sponge pads do not leave marks on parts;
• Smooth expandable design for confident and safe operation.

The main criterion for choosing a clamp is its working stroke. This parameter defines the distance between the fixing parts. The higher the value of the indicator, the more opportunities for fixing different-sized elements. The working stroke indicator varies from 20 to 350 mm.

In addition, you need to pay attention to structural strength and clamping force. Metal products are distinguished by a long service life and tight fixation. When buying a plastic clamp, you need to make sure of the quality of the material. There are high-tech plastic models that can last for many years.

For a detailed description of the IRWIN QUICK GRIP XP clamps, see the following video.