All about Z-profiles

There are many variations of profiles. They differ in various parameters, including in shape. Special Z-shaped pieces are indispensable in many cases. In the article we will tell you everything about the profiles of such a structure.

There are many types of curved profiles. These include Z-shaped pieces. Today they are one of the most demanded and needed in construction. These parts have a cross-sectional shape where the two flanges are in opposite directions. Due to such a device, the considered profile models turn out to be advantageous for a variety of structures and their individual nodes, which are bent in 2 planes at once.

Modern curved profile structures are made mainly of practical galvanized steel, as well as aluminum. The production of such parts is carried out on special roll forming machines using the cold rolling method. It is a special metal bar, which in cross-section resembles the Latin letter Z. To make a similar type of profile, high-quality steel with a thickness of 0.55 to 2.5 mm is used.

The part under consideration is divided into 2 main types. The profile can be standard and reinforced. Modern Z-shaped structures are manufactured in accordance with GOST 13229-78. This means that the profiles are made only of high quality materials. During the production process, the parts in question undergo all the necessary quality checks. As a result, predominantly robust, practical and high-quality curved elements are marketed.

The mounting Z-shaped profile has other features, thanks to which it is in demand.

• Such a detail can boast of being used in a wide variety of fields of activity. Most often, the type of profile under consideration is used in the construction of high-reliability frame structures.

• It is a reliable and practical material made only from high-quality, strong materials that are not subject to mechanical damage and deformation.

• Z-profiles can be used in various climatic conditions.

• If the installation work is planned to be carried out in conditions of aggressive influence of external factors, then the Z-shaped profile made from high-quality raw materials is perfect for them.

• This type of profile is allowed to be used in areas with high seismic activity.

• The Z-shaped profile is environmentally friendly and fireproof. This part is not subject to fire, does not support a flame, and does not emit hazardous substances that can harm the health of living organisms.

• Sometimes, during the preparation and construction of various structures, it is necessary to interconnect elements that are unequal in their functional loads. Because of this, these components end up in different planes and are installed at different angles. As a result, due to their structural features, Z-shaped profiles have become so popular.

A high-quality zeta profile is used in a large number of installation works. Often this part is the only possible and suitable solution. Let's look at the main areas of application of the profile in question.

• A similar element is very often used for works related to the facade. This can be cladding of buildings with materials such as porcelain stoneware, outdoor tiles, fiber cement, asbestos-cement slabs, as well as cassettes made of composite aluminum. And also the Z-shaped profile is suitable for mounting metal cassettes, profiled sheets and other mounting materials.

• By means of such a profile, the arrangement of engineering communication systems can be provided. The design features of Z-shaped elements allow their use when installing various kinds of communications. First of all, we are talking about high-quality ventilation systems, pipelines, cable lines of buildings.

• The Z-shaped profile can also be used during the installation of furniture structures. The combination of light weight and impressive bearing capacity, as well as ease of assembly operations makes it possible to use this part when creating and assembling various pieces of furniture.

• With the use of a zeta profile, partitions or built-in rooms that are complicated in their structure and configuration can be erected. When equipping partitions from drywall sheets, in most cases, other types of profiles are used that differ in a C- or U-shaped section. But if it is necessary and desired to create a beautiful and stylish interior, a multi-tiered structure on the surface of a wall or ceiling, a zeta element will be the best solution.

• The part in question can be used as a fastener for installing laminate and other popular floor coverings.

There are several different modifications of Zeta profiles. Consider what characteristics and parameters they have, and what device they have.

• Steel. Some of the most purchased and practical options. The galvanized Z-profile is designed for a long service life, is wear-resistant, reliable, not subject to corrosion. Steel parts are suitable for a wide variety of assembly jobs. They are produced by many large manufacturers. Profiles made of steel are available in different lengths, widths and thicknesses, and differ in joining. Complex structures can be built from such elements in a short time.

• Aluminum... No less popular in the modern market is a subspecies of the zeta profile. Lightweight, non-corrosive. Aluminum elements are relatively flexible and very flexible to work with. Anodized aluminum Z-profiles are available for sale at relatively low prices. These parts are also available in different dimensions.

• Plastic... For various installation works, not only metal, but also a plastic type of Z-profile is used. Such parts are much cheaper than steel or aluminum options. They are also often used to install multi-level structures on ceilings or walls. Plastic elements are mounted extremely simply, but they cannot boast of the same mechanical stability as metal specimens - they can be easily broken or damaged.

• Perforated. This type of Z-profile is intended for the installation of air conditioning systems, as well as cable support, heating and ventilation systems. Perforated elements are used when installing metal shells, control panels or electrical devices. The structures under consideration can be attached both to special studs and to anchors.It is worth noting that the perforated Z-shaped profile can withstand repeated flexion and extension without damage without losing its regular shape.

Zeta profiles are available with different parameters. This applies to parts made from all possible materials. The most common are profile elements with the following dimensions:

• 45x25;

• 50x50x50;

• 20x22x40;

• 20x22x55;

• 20x21.5x40;

• 26.5x21.5x40;

• 30x21.5x30;

• as well as 10x15x10x2000 and 29x20x3000 mm.

Most often, there are zeta constructions on sale that have a length:

• 1,2;

• 1,5;

• 2,7;

• 3;

• 3.5 m and so on - up to 12 m.

The parameter of the thickness of the metal or plastic parts under consideration can be 2.5, 2.0 mm.

Z-shaped profiles are also available in other sizes. There are many different options available or on request in different retail outlets.

Curved structural elements are presented in several modifications. Individual profile models are characterized by their parameters and characteristics. Let's take a closer look at the most common types of Z-shaped profile elements with different markings.

• K241... This designates the perforated type of profile, which is made of galvanized steel. There can be only 100 holes in one strip. The mass of such a profile model is 2.6 kg. These types of profiles are of low cost and are sold in many specialized stores.

• K239... A profile part, which also has a perforated surface with 66 holes. The product of this model weighs 5.2 kg. Suitable for various electrical work. This profile can be easily installed on concrete, bricks and drywall sheets. In this case, you do not need to use glue or cement mortar.

• K241U2... This is a hardened profile, complemented by a special protective coating. Manufactured from high quality steel with a thickness of 2 mm to withstand the severe stress of cables and busbars. The considered profile model is also used for fastening fluorescent lamps and diode strips.

• Z4... This model of Z-shaped profile part is most often used to decorate the front part of furniture structures of any type. This can be a framing of furniture facades made of glass, mirror, lacquer, lacobel with a thickness of not more than 4 mm.

• Z1... It is a profile for facades. Some manufacturers produce it in different colors.

There are also other modifications of bent Z-profiles. It is possible to choose the optimal and ideally suitable model for carrying out a variety of installation work - from very complex to extremely simple.

The profile details in question require correct installation work. The Zeta elements are attractive because they are easy to install. This does not take much time, which is also a positive quality of such parts. When installing Z-profiles, it is advisable to adhere to a number of important rules.

• It is important to take into account that Z-shaped elements are overlapped. The specified approach to the installation contributes to the effective growth of the stiffness and load-bearing capabilities of the structure being manufactured.

• Another important point is the selection of elements of the correct dimensions before starting installation work. The importance of the profile parameters should not be underestimated. And it is also advisable to carry out thorough calculation calculations.

• If a vertical-horizontal installation diagram of the profile part is provided, then it must be attached to the horizontal profiles by means of blind rivets or self-tapping screws.

• There is also a lightweight vertical installation scheme, in which fastening is carried out thanks to special blind rivets or self-tapping screws directly to the bracket.

• When the scheme of fastening vertical zeta elements to the interfloor overlap is meant, the fastening should be carried out by means of self-tapping screws or rivets into the shelf of the base bracket nozzle.

• The Z-type metal element must be mounted with such a width pitch that corresponds to the technical indicators of the structures with which specific work is carried out.

The very technology of carrying out installation work largely depends on the purpose for which they are carried out, and on what grounds. If you don't want to install Zeta profiles yourself, you can contact the professionals. Many organizations that implement this type of profile also offer installation services.