Features of corner profiles for LED strips

LED lighting is very popular. It attracts users with its high quality, cost effectiveness and a large list of uses. LED strip can be used to decorate interiors, furniture structures, signs and many other similar bases. In today's article, we will find out what are the corner profiles required for installing LED strips.

LED lighting is becoming more and more popular every year. Many people choose it. However, it is not enough to select only high-quality LED lighting. It is also necessary to purchase a special base part for it - a profile. This element is different. So, the corner option is very popular. Installation of diode lighting is possible with the use of a properly selected profile. In most cases, the structures under consideration are used for the following purposes:

• for high-quality lighting of niches, as well as window and doorways;
• to complement skirting boards (both floor and ceiling);
• for beautiful illumination of stair steps located in the room;
• for decoration and decoration of cabinets, showcases, pedestals and other bases of this kind.

Corner profile models are very useful when it comes to the original design of a particular setting. Thanks to such a detail, the lighting can be placed in places where it is not possible to fix ordinary lamps. Besides, the corner profile also performs a heat-dissipating function. By solving this problem, diode lighting demonstrates a longer service life.

Today, different types of angular profiles are on sale. They are classified according to many characteristics. The first thing the buyer should pay attention to is the material from which the base is made for the diode tape.... Different models have different performance characteristics and parameters. Let's get acquainted with them.

Most popular varieties. Corner profile models made of aluminum are designed for a long service life. They are not subject to mechanical damage. They are lightweight, due to which installation work is extremely simple and quick. Also, aluminum products have an attractive appearance, which is very important when drawing up a beautiful interior design.

If there is a desire, the aluminum profile can be painted in any color you like. It can be black, white, gray, red and any other shade. Such bases under Led strips look especially attractive and stylish. Aluminum profiles are not afraid of water, do not rot and are resistant to corrosion. Such bases can be installed even outside the interior spaces - under the influence of unfavorable weather conditions, they will not begin to collapse. To trim such a profile, you don't have to buy expensive professional tools.

On sale you can also find profiles made of polycarbonate. These products are quick and easy to install and flexible.... Plastic bases for a diode strip are cheaper than aluminum ones.They are also not subject to decay, but their mechanical resistance is not as high as that of aluminum products.

It is not difficult to break or split the plastic profile. Polycarbonate profiles are available in different colors. Buyers can choose any options that are more suitable for the environments where installation work is planned.

Corner profiles can have different dimensions. Most of the options initially correspond to the dimensions of the diode strips. If these two parts do not fit each other in such parameters, then they can always be cut. But it must be borne in mind that the same profile is cut extremely simply, but the diode tape can be cut only in certain places, which are always accordingly marked on the surface.

Stores sell corner profiles with the following dimensions:

• 30x30 mm;
• 16x16 mm;
• 15x15 mm.

Of course, you can find products with other parameters. The length of the corner profiles also varies. The most common specimens with a length of 1, 1.5, 2 and 3 meters... You can choose the right part for almost any tape and installation work.

The profile, which has a triangular structure, is complemented by various accessories. They are essential for correct installation and good results. We are talking about such elements:

• fasteners;
• stubs;
• screens.

The listed components are very important, so you need to make sure that they are available right away so that you do not encounter unpleasant surprises during installation.

The profile of the corner structure must be chosen as carefully and deliberately as possible. The buyer must start from a number of important criteria in order not to be mistaken with the choice of the base for the diode tape.

• First, you need to decide where exactly the profile and the light device itself will be installed. It all depends on the wishes and plans of the consumer. Often LED lighting is installed in the kitchen to illuminate the working area, in the living room, as well as in the garage, workshop and any other areas. Knowing exactly where the installation work will be carried out, it will be much easier to choose the right profiles.
• Find products made from quality materials. There are plastic and aluminum profiles on sale, each of which has its own advantages and disadvantages. Weigh all the pros and cons to settle on a specific option. Models made of aluminum will turn out to be more practical, but you can save money by buying a polycarbonate copy.

• It is very important to take into account the dimensional parameters of the corner profile. Most of these bases are initially tailored to the size of Led strips, so it will not be difficult to make the right choice. Measure the length and width of the diode strip in order to compare the revealed parameters with the profile parameters. If there is a discrepancy in the length, then it can be easily eliminated by cutting off the extra centimeters / millimeters.
• When choosing a suitable angle-type profile, be sure to inspect it as carefully as possible. Both the plastic and aluminum tape connector with the base should not have the slightest defects, damage, chips, cracks or other defects. A damaged profile will not last long and can get even more serious damage during installation work.
• Pay attention to the diffuser, which is added to the profile. This detail can be either transparent or matte. The choice of one or another option will determine the degree of intensity of the diode lighting emanating from the bulbs. Here each consumer decides for himself which of the varieties suits him best.
• Make sure that all the parts you need are included with the ribbon base kit. If they are not there, then the work on installing the profile may become much more complicated or even impossible.

If you take into account all the above features of choosing an angular profile for a diode tape, then the purchase will not bring disappointment and will turn out to be very practical.

As mentioned above, the installation of the corner profile under the LED strip is not difficult. Everyone can easily handle all the work. The main thing is to act in stages. Excessive haste in this matter is not welcome. Let's take a closer look at the step-by-step instructions for installing a base with an angle of 45 degrees.

• The corner profile can be attached quickly and easily using ordinary double-sided tape. In order for the connection of the bases to be as strong and reliable as possible, all surfaces must first be carefully treated with degreasing agents. The substrate must not only be perfectly clean, but also dry.
• Corner profiles can also be mounted on the chosen base using screws or self-tapping screws. This installation method is especially convenient when the backlight is installed on a wooden base. In this case, the work is as simple and hassle-free as possible.
• If you plan to install an LED profile made of aluminum, and the base consists of brick or concrete, then it is advisable to attach the product with dowels.

It is necessary to fasten the LED strips themselves very carefully and carefully.... This is especially true of those cases when a polycarbonate profile was chosen as the base. Bends with a radius of about 2 cm should be avoided, since if the diodes on the tape are damaged, its functionality will be impaired. That part of the tape that is open must be fixed strictly according to special marks, in accordance with the parameters of the angular type profile. It should not be forgotten that it will be possible to solder isolated sections only in extreme cases.

Consider some useful tips for installing and choosing corner profiles.

• In confined spaces, plastic profiles will not be able to withstand heating from diode bulbs without problems, therefore, they are most often fixed on open bases.
• If a cut-in corner profile is not installed, but a cut-in corner profile, then it is impossible to insert a diode tape into it, the power of which is more than 9.6 watts / meter.
• When attaching the profile to the tape, you need to familiarize yourself with its operating temperature in advance. This is due to the fact that many of these materials lose their adhesive ability under strong heating.
• The corner profile should be installed in a place where there will always be free access to the diode strip as needed.
• It is not recommended to buy corner bases for very powerful and bright lighting strips, since when installed in a corner, such parts are insulated from 2 sides at once.