All about anti-slip profile

A staircase, in whatever building it is located, and whatever it is, external or internal, narrow or wide, spiral or straight, must necessarily be suitable not only in design, but also be safe. Safety, like any other element of the staircase, is calculated even at the moment of design. To ensure it and eliminate the possibility of injury when moving up the stairs, pads are used, which are also called anti-slip profiles. It is about these overlays that will be discussed in the article.

There are special regulatory documents that regulate all the requirements not only for installation, but also for the safety of the staircase. The GOST clearly states what the staircase should be, what requirements all its structural elements should meet.

One of the points of GOST indicates that the staircase must be equipped with an anti-slip profile. This is a required stair attribute. It can be made of different materials to ensure safe lifting and lowering. The anti-slip profile can be installed both on the step and on the threshold.

Under the influence of various weather conditions, such as snow, rain, the threshold becomes slippery, which leads to falls. The presence of a special profile on the surface makes it possible for people to avoid injury.

Anti-slip pads can be seen on almost every threshold when entering a building, and this is very good. The assortment of this staircase attribute is diverse. There are various pads on the market that differ in technical parameters, appearance, installation method and price. The quality, reliability and safety of the product depends, first of all, on the material from which the profile is made.

• Aluminum or stainless steel. It is characterized by high resistance to atmospheric and chemical influences, durability, quality, reliability. Installation of an aluminum profile with a rubber insert is relevant in institutions where compliance with all public environmental norms and standards is of great importance, in places where there is a lot of traffic. Its presence is mandatory in institutions such as a hospital, an administrative building, an educational institution, swimming pools, retail outlets. Such an embedded profile is attached to the surface using special fasteners.
• Rubber. This is a narrow elastic tape fixed to the surface with a special adhesive. It is often installed outside the building, this is due to the characteristics of the product. Rubber is a material that does not deform or lose its original properties when exposed to ultraviolet rays and temperature. The rubber anti-slip profile functions perfectly at temperatures from + 50 ° C to -50 ° C. The service life is at least 5 years.
• PVC. Very often, an anti-slip PVC profile is used not only for security, but also as a decorative element. Such a product is mounted on stairs in saunas, hotels, coffee establishments. It not only guarantees safety, but also gives the staircase an aesthetic appearance.It is characterized by resistance to various mechanical and chemical damage. Changes in weather conditions also do not affect functionality.

One of the advantages of the anti-slip pad is the ease and simplicity of installation. In order to install it, you do not need to negotiate with specially trained people, you can do everything yourself. There are two methods of profile mounting: on self-tapping screws and on special glue. The installation method only depends on the type of product you have chosen.

In the work, you need to follow the instructions.

• Surface cleaning. All debris, dust and dirt must be removed.
• Degreasing. To do this, it is enough to purchase a special product that is applied to a previously cleaned and dry surface. Why is this needed? In order for the chain between the surface and the profile to be as strong as possible.
• Marking lines will facilitate installation. The markings guarantee an even and symmetrical laying of the profile. Anything can be used to draw the marking lines: a marker, chalk, pencil.
• If you are mounting an aluminum profile and using corners or strips, be sure to mark the places of their attachment on the side surface. The distance between the screws should not be more than 35 centimeters. If there are tiles on the threshold or stairs, the fasteners are screwed into the seam between the tiles.
• If you are installing an anti-slip profile on an adhesive basis, you just need to remove the protective layer from the product and install the cover according to the markings.