All about climbing scaffolding

Content
  1. What it is?
  2. Manufacturers
  3. Recommendations for use

Scaffolding is an important part of any large-scale facility. Among these structures, there are a large number of varieties, which is due to the specific conditions of those buildings where forests are used. Self-climbing counterparts are a very interesting and rather versatile type.

What it is?

Climbing scaffolding is a specific structure with mechanical parts. They, in turn, allow a person to go up and down. The main part of the work is taken over by the structure, which is made of stamped steel. With the help of two fasteners, it is fixed in the lower and upper parts on parallel beams, which act as the basis of these scaffoldings.

And also this device is equipped with a special pedal, which is similar to a conventional mechanical car jack. When you press on it, the moving part of the jack begins to push the structure upward, thereby changing the height of the scaffolding.

Besides, you can adjust the structure as you like: for example, deliberately creating a bias on one side. The advantage of this type of forest is the relative autonomy, which is the ability to work alone.

If you need to go down, then you just need to turn the lever, as a result of which the moving part will begin to slide down a little. All actions are performed only on two large beams and a board on which the builder stands. At the same time, you do not need to move anywhere and drag along tools, paint, accessories or equipment, which are sometimes heavy and cumbersome. Thanks to the presence of a running bracket, you can quickly and safely raise and lower, which is very convenient for domestic construction at low and medium heights.

Of course, such scaffolding does not have large dimensions when it comes to high-rise buildings. But this has its own advantage - self-lifting models are easy to set up and operate. As for additional equipment, you can install a special net to prevent objects from falling from the forests, or a canopy from rain and snow.

The stability of the structure is ensured by the supports and the board on which the people are. Fastening through pins allows you to feel comfortable at a height of up to 3-3.5 m, after which it is desirable to install an additional rod. It is a special pin that needs to be removed and installed as you overcome the height.

Other features include the ability to install small platforms for a working tool.

Climbing scaffolding has become a fairly popular device for the construction industry in Europe and North America due to its simple installation, convenient operation and versatility. The maximum height can be up to 12 m. Among the disadvantages, one can note the low level of mobility, since the structure must be moved completely to each wall, but its width can be adjusted.

Due to the principle of self-entrapment, these structures are held much more reliably if the weight on the support becomes greater. Simply put, the heavier the top, the stronger the bottom structure. This is very handy for those people who are worried about scaffolding falling off. And also among the advantages can be noted the ability to work alone.

The carrying capacity of most models reaches 400 kg, so there is no need to worry about the location of tools, equipment, as well as the number of workers, which can be up to 6-7 people. With the optimal length of the horizontal board, you can work on wide walls, which speeds up your work. Climbing scaffolding is beginning to be popular in our country, where there are already several manufacturers.

Manufacturers

Pump Jack from Lestep known for its products in Moscow and the Moscow region. When purchasing, you can choose the required height, as well as the number of additional fasteners that ensure the strength of the structure. The package includes anchor supports, prefabricated jacks, desktop consoles and the mechanical installation itself.

Another manufacturer is Rezhstal's Footlift. The company's products have proven themselves at numerous construction and household facilities throughout the territory of our country. The kit includes:

  • lifting mechanism;
  • fencing;
  • lower supports for different types of bases (there are models with and without spikes).

In addition, a spacer mount and stainless steel fittings are provided.

Recommendations for use

The assembly consists of several stages. First you need to assemble the wall stop using the nuts and bolts that come with the purchase. The bottom support is then mounted (instructions). Next, a driving mechanism is installed along with a jack and a handle, which will allow the structure to be moved up and down. The fully assembled mechanism is installed on the posts, securing all necessary pins and bushings.

After a certain period of operation, tighten the connecting threads, and also check all the components of the structure.

1 comment

How are the problems of installing poles longer than six meters solved? With blocks?

The comment was sent successfully.

Kitchen

Bedroom

Furniture